• 제목/요약/키워드: White-Metal

검색결과 228건 처리시간 0.027초

이종(異種) 광원 조합에 의한 복수 광원의 분광 방사특성과 광달(光達) 거리 및 집어등 운용방법 (Characteristics of Spectral Irradiance Based on the Distance from the Light Source and Operating Method for Fishing Lamps with a Combined Light Source)

  • 최석진
    • 한국수산과학회지
    • /
    • 제42권6호
    • /
    • pp.711-720
    • /
    • 2009
  • Characteristics of spectral irradiance based on the distance from the light source, which combined metal halide lamp and high-luminance light-emitting diode (LED) light, were studied to investigate a suitable operating method for fishing lamps of the next generation. A 380-780 nm wavelength radiation was superior when using 1 W electrical power in the order of metal halide lamp, blue LED, white LED, and combined LED lights. The wavelengths at which the irradiance was at a maximum were fixed to 581 nm for the light source, which was combined for each ratio. If the irradiance characteristics at 300-1100 nm wavelengths were set as 100%, the irradiance rates at 400-599 nm were 100%, 72.7%, 88.9%, and 69.5% for the blue, white, combined LED lights, and metal halide lamp, respectively. This indicated that the color rendering of the LED lights was dependent on the metal halide lamp light source. When the horizontal profiles (450-550 nm wavelength) of irradiances were compared to a different type of light source in the ratio white LED: combined LED lights: blue LED: metal halide lamp, the irradiated area of more than $0.01\;{\mu}mol/s/m^2/nm$ was in the ratio 1.0 : 1.3 : 1.7 : 37.3, respectively. Based on the radiation characteristics and irradiance according to the distance from the light source, LED lights have an estimated economic efficiency if used before and after operation of a metal halide lamp.

강원도 오십천 수계에 분포하는 백색침전물, 적갈색침전물 및 혼합침전물의 중금속 오염, 광물조성 및 분광학적 특성의 비교분석 (Comparative Analysis of Heavy Metal Contamination, Mineral Composition and Spectral Characteristics of White, Reddish Brown and Mixed Precipitates Occurring at Osip Stream Drainage, Gangwondo, South Korea)

  • 임정화;유재형;신지혜;고상모
    • 자원환경지질
    • /
    • 제52권1호
    • /
    • pp.13-28
    • /
    • 2019
  • 본 연구는 강원도 오십천 수계에 형성된 백색, 적갈색 그리고 두 침전물이 혼합된 침전물을 대상으로 침전환경을 파악하고, 중금속 오염도 및 광물학적 분석을 수행하였다. 또한, 분광학적 분석을 통해 수계침전물의 중금속 오염도와 광물조성에 따른 분광특성을 고찰하였다. 백색침전물, 적갈색침전물 및 혼합침전물이 형성된 하천수의 pH 범위는 각각 4.43-6.91, 7.74-7.94와 7.59-7.9로 나타났다. X선 형광분석 결과, 이들 침전물은 니켈, 구리, 아연 및 비소에 대해 오염도가 높은 것으로 확인되었다. 백색침전물은 적갈색침전물 내 알루미늄의 농도에 비해 약 3.3배 높았으며, 적갈색침전물은 백색침전물 내 철의 농도보다 약 15배 부화되었다. X선 회절분석 결과 백색침전물은 알루미노코큠바이트, 깁사이트, 석영, 사포나이트, 일라이트의 광물로 구성되며, 적갈색침전물은 알루미늄 이소프로폭사이드, 고령토, 침철석, 돌로마이트, 엽랍석, 자철석, 석영, 방해석, 홍석류석으로 이루어졌으며, 혼합침전물은 석영, 조장석, 방해석의 광물로 구성된다. 백색침전물은 깁사이트, 사포나이트, 일라이트에 의해, 적갈색침전물은 침철석, 고령토, 엽랍석에 의해, 혼합침전물은 조장석에 의해 분광학적 특성이 발현되는 것으로 판단된다. 중금속 오염도가 높아짐에 따라 분광반사도가 낮아지는 경향을 보였으며, 흡광깊이를 분석한 결과, 백색침전물 및 적갈색침전물에서 검출된 중금속은 각각 사포나이트와 일라이트, 침철석과 자철석에 흡착된 결과로 예상된다.

Increase of Antioxidant Activities of Egg White Protein Hydrolysate by Fractionation without Using Toxic Chemicals

  • Park, Eun Young;Sato, Kenji
    • 한국조리학회지
    • /
    • 제24권2호
    • /
    • pp.103-111
    • /
    • 2018
  • The objectives of the present study were to examine the antioxidant activity of autofocusing fractions from egg white protein hydrolysates and obtain higher antioxidant peptide fraction, which could be applied to the food model system. Alkaline protease hydrolysate of egg white protein exerted higher antioxidant activities than other protein hydrolysates and were fractionated on the basis of the amphoteric nature of sample peptides by preparative isoelectric focusing without toxic solvents and reagents, which is termed autofocusing. Neutral and basic fractions showed higher 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity than the acidic fractions. The acidic and neutral fractions showed higher hydroxyl (OH) radical scavenging activity and oxygen radical absorbance capacity (ORAC) values than the basic fractions. The acidic fractions showed higher metal chelating activity than basic fractions. Antioxidant activities of some autofocusing fractions except for ORAC showed higher compared to the crude hydrolysate. These results suggest that peptides fractions from egg white protein are effective antioxidant, and that autofocusing could be useful to increase antioxidant activity for application to food system.

미인폭포 수계에서 발생하는 백색침전물의 중금속 오염 및 분광학적 특성 (Heavy Metal Contamination Characteristics and Spectral Characteristics of White Precipitation occurring at Miin Falls Drainage)

  • 임정화;유재형;신지혜;정용식;고상모;박계순
    • 한국광물학회지
    • /
    • 제30권1호
    • /
    • pp.31-43
    • /
    • 2017
  • 본 연구는 백화현상이 극명하게 발생한 미인폭포 내 백색침전물을 대상으로 X선형광분석법, X선회절분석법 및 휴대용 분광계를 이용하여 광물조성을 확인하고, 분광특성을 고찰하였다. 그 결과 모든 시료에서 알루미늄이 평균농도보다 높게 검출되었고, 대부분의 시료에서 카드뮴과 니켈의 오염도가 높았다. X선회절분석 결과 모든 시료에서 석영, 고령토, 롬보클레이스, 알루미노코큠바이트, 깁사이트의 광물이 검출되었고 중금속은 점토광물에 흡착하여 존재한다고 판단된다. 백색침전물의 분광학적 특성은 가시광선 대역에서 반사도가 증가하는 추세를 보이나, 근적외선, 단파적외선으로 파장이 길어짐에 따라 반사도가 서서히 감소한다. 백색침전물의 흡광특성을 바탕으로 볼 때 분광학적 특성은 고령토, 롬보클레이스, 알루미노코큠바이트, 깁사이트에 의해 발생하는 것으로 판단된다. 퇴적물 내 중금속 종류 및 함량에 따른 영역별 흡광깊이 변이양상을 분석한 결과, Al-OH의 흡광특성인 2202 nm에서 알루미늄함량과 흡광깊이 사이에 높은 양의 상관관계가 성립하는 것이 확인되었다. 이는 분광학적 특성 중 흡광깊이가 중금속 함량의 유추에 유용할 수 있음을 지시한다.

Standard와 MAR 알고리즘에서 CT 검사조건 변화에 따른 인공물과 노이즈 평가 (Evaluation of Artifact and Noise in the Standard and MAR Algorithms with Variation of Examination Conditions of CT)

  • 김영근;양숙;왕태욱
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제43권2호
    • /
    • pp.79-85
    • /
    • 2020
  • The influence of metal artifact in CT image depends on the type of metal materialsm, the reconstruction algorithm, and scan parameters. The presence of metal artifacts was quantitatively evaluated by applying the standard and MAR algorithms through the phantom study. In the change of tube voltage applied the standard algorithm, metal artifact decreased to 44.9% for 80 vs 120 kVp, 24% for 100 vs 120 kVp, while the image taken at 140 kVp increased the artifact by 19% compared to 120 kVp. When the tube current was increased from 100 to 300 mA, there was no significant difference in the CT value and noise. Black band and white strike artifacts occurred up to 65.9% in the adjacent ROI of the metal driver, whereas titanium screw produced lesser metal artifact than that of the metal driver. The combination of 120kVp or higher tube voltage-standard algorithm was effective in removing black band artifacts as well as white streak by high density materials. However, MAR reconstruction algorithm was useful in improving image quality under the environment of low kVp and high density materials, without increase of radiation exposure.

원양 오징어채낚기 집어등 불빛의 수중 투과 특성 (Transmittance properties of fishing lamp in distant-water squid jigging vessel)

  • 조현수;오택윤;김영승;문대연
    • 수산해양기술연구
    • /
    • 제42권4호
    • /
    • pp.228-233
    • /
    • 2006
  • The transmittance properties of fishing lamp of the squid jigging vessel was investigated during nighttime operations in the Northwest Pacific on 21 and 29 September 2005. The metal halide lamps of white color($2.0kW{\times}168$) in the air and metal halide lamp of white color($10.0kW{\times}1$) in the underwater were used as a fishing lamp for gathering squids. The relative irradiance of metal halide lamp in the air showed peak in 850nm of wave length. The relationship between underwater illuminance(Y) and water depth(X) of metal halide lamp light in the observation areas is represented, $Y=84.137e^{-0.1105X},\;R^2=0.9974$. The distribution of underwater illuminance of measure points St. 1-5 showed low value of 0.11x in 80m depth.

Synthesis and Application of the Novel Azomethine Metal Complexes for the Organic Electroluminescent Devices

  • 김성민;김진순;신동명;김영관;하윤경
    • Bulletin of the Korean Chemical Society
    • /
    • 제22권7호
    • /
    • pp.743-747
    • /
    • 2001
  • New azomethine metal complexes were synthesized systematically and characterized. Beryllium, magnesium, or zinc ions were used as a central metal cation and aromatic azomethines (L1-L4) were employed as a chelating anionic ligand. Emission peaks o f the complexes in both solution and solid states were observed mostly at the region of 400-500 nm in the luminescence spectra, where blue light was emitted. Three of them (BeL1 (Ⅰ), ZnL2 (Ⅱ), and ZnL3 (Ⅲ)) were sublimable and thus were applied to the organic light-emitting devices (OLED) as an emitting layer, respectively. The device including the emitting layer of Ⅰ exhibited white emission with the broad luminescence spectral range. The device with the emitting layer of Ⅱ showed blue luminescence with the maximum emission peak at 460 nm. Their ionization potentials, electron affinities, and electrochemical band gaps were investigated with cyclic voltammetry. The electrochemical gaps of 2.98 for I, 2.70 for Ⅱ, and 2.63 eV for Ⅲ were found to be consistent with their respective optical band gaps of 3.01, 2.95 and 2.61 eV within an experimental error. The structure of OLED manufactured in this study reveals that these complexes can work as electron transporting materials as well.

처리조건에 따른 중금속 이온의 안정화 거동 (Stabilization Behavior of Heavy Metal ions by Treatment Conditions)

  • 엄태호;김유택
    • 한국세라믹학회지
    • /
    • 제40권6호
    • /
    • pp.583-588
    • /
    • 2003
  • 폐기물 함유 세라믹 재료의 성형과정에서 일어나는 일차적인 중금속 안정화 과정을 알아보기 위하여 중금속(Cd, Cr, Zn) 표준용액의 농도(10-30 ppm)와 pH(pH 3-9)를 조절하여 적점토, 백토와 제올라이트에 대해 회분식 흡착실험을 행하였다. pH증가에 따라 모든 흡착원료에서 Cd와 Zn의 흡착률은 증가하였고 pH 5 이상에서는 완만한 증가를 보였다. Cr의 경우 pH증가에 따른 흡착률의 증가는 관찰할 수 없었고 오히려 적섬토와 백토를 혼합한 원료의 경우에는 pH 3에서의 흡착률에 비해 pH 5 이상에서는 50%의 흡착률 감소를 보였다 세 가지 중금속 Cd, Cr, Zn을 함께 혼합한 중금속 용액을 적점토에 대해 실험한 결과 흡착률은 Cd, Zn>Cr 순이었으나, Cu, Fe, Pb의 중금속이 추가적으로 첨가될 경우 Fe>Pb, Cu>Cr>Zn>Cd 순으로 흡착률이 변화하였다. 이는 공존 양이온의 종류가 흡착률을 좌우하며 주어진 조건에서 서로 경쟁적인 관계를 가지고 흡착하기 때문인 것으로 사료된다 한편, 공존음이온으로 Cl$^{-}$와 SO$_4$$^{2-}$ 를 1-20 ppm까지 첨가한 경우 공존 양이온의 경우와는 달리 중금속 흡착률에는 큰 영향을 주지 못하였다.

경덕진요 백자 구연부 금속 테두리의 제작기법 및 접착방법 재현 (Revival Manufacturing Technique and Bonding Method for Jingdezhen White Porcelain with Metal Bound Rim)

  • 양필승;서정호;황현성
    • 보존과학회지
    • /
    • 제25권3호
    • /
    • pp.273-282
    • /
    • 2009
  • 국립중앙박물관에서 소장 중인 신안 해저 출토 유물인 경덕진 백자 중 '청백자인각화훼문은구완' 4점과 '백자은구대접' 1점의 금속 테두리 장식에 대한 연구 논문을 조사한 결과, 테두리의 재질은 은이 아닌 주석이었고 접착제로는 옻을 사용하였음을 알 수 있었다. 이러한 과학적 분석 결과를 토대로 이번 연구에서는 도자기 구연에 부착된 금속 테두리의 제작기법과 접착방법에 대한 재현실험을 실시하였다. 테두리 재현방법으로는 주석 판의 다양한 재단방식 중 재료의 손실을 줄이거나 작업성이 가장 좋은 방법은 직선재단방식이었으며, 옻을 사용한 금속테두리 부착방법 실험에서는 순수한 옻 성분만을 사용하기보다는 토분과 함께 혼합하여 사용한 것이 보다 더 작업성이 좋았음을 알 수 있었다. 또한 건조방법 실험에서는 전통 칠기 보존처리에서 사용하는 상온에서 가습하여 건조하는 방법보다는 비교적 고온에서 짧은 시간에 건조하여 부착하는 방법이 보다 더 효과적인 방법임을 알 수 있었다.

  • PDF