• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.235-240
• /
• 2003

Methods to predict fatigue crack growth are compared in a quantitative manner for crack growth test data of 2024-T351 aluminum alloy under narrow and wide band random loading. In order to account for the effect of load ratio, crack closure model, Hater's equation and NASGRO's equation have been employed. Load interaction effect under random loading has been considered by crack closure model, Willenborg's model and Wheeler's model. The prediction method using the measured crack opening results provides the best result among the prediction methods discussed for narrow and wide band random loading data.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.10
• /
• pp.1785-1792
• /
• 2003

Methods to predict fatigue crack growth are compared in a quantitative manner for crack growth test data of 2024- T351 aluninum alloy under narrow and wide band random loading. In order to account for the effect of load ratio, crack closure model, Hater's equation and NASGRO's equation have been employed. Load interaction effect under random loading has been considered by crack closure model, Willenborg's model and Wheeler's model. The prediction method using the measured crack opening results provides the best result among the prediction methods discussed for narrow and wide band random loading data.

• Journal of Power Electronics
• /
• v.19 no.6
• /
• pp.1403-1412
• /
• 2019

A coupled inductor-dual boost-inverter (CIDBI) with a differential structure has been presented for application to a micro-inverter photovoltaic module system due to its turn ratio of a high-voltage level. However, it is difficult to design a CIDBI converter with a conventional PI regulator to be stable and achieve good dynamic performance, given the fact that it is a high order system. In view of this situation, a sliding mode control (SMC) strategy is introduced in this paper, and two different sliding mode controllers (SMCs) are proposed and adopted in the left and right side of two Boost sub-circuits to implement the corresponding regulation of the voltage and current. The schemes of the SMCs have been elaborated in this paper including the establishment of a system variable structure model, selection of the sliding surface, determination of the control law, and presentation of the reaching conditions and sliding domain. Finally, the mathematic analysis and the proposed SMC are verified by experimental results.

• Publications of The Korean Astronomical Society
• /
• v.8 no.1
• /
• pp.169-177
• /
• 1993

Observed spectra of supernovae allow the empirical classification of supernovae into two basic categories, Type I with little or no evidence of hydrogen, and Type II with obvious evidence for hydrogen. The broad class of Type I can be subdivided depending on whether helium or silicon and other intermediate mass elements is observed. Understanding the physical processes that underlie these classifications---the progenitor evolution. the explosion mechanism, and end products---requires calculation of radiative transfer and model spectra. While most Type II occur in evolved massive stars that undergo core collapse. some may span the dividing line between degenerate and non-degenerate carbon burning and involve both core collapse and thermonuclear explosion. Type Ia are still most plausibly explained as thermonuclear explosions in carbon/oxygen white dwarfs in binary systems. Type Ib reveal helium atmospheres and are probably the result of core collapse in the helium core of a massive star that has lost its hydrogen envelope to a binary companion or to a wind. Type Ic supernovae are probably related to Type Ib but have also lost their helium envelope to reveal a mantle rich in oxygen.

• Journal of Acupuncture Research
• /
• v.36 no.1
• /
• pp.1-11
• /
• 2019

Models of traditional Chinese medicine (TCM) are still difficult to grasp from the view of a Western-cultural background. For proper integration into science and clinical research, it is vital to think "out of the box" of classical sciences. Modern sciences, such as quantum physics, system theory, and information theory offer new models, that reveal TCM as a method to process information. For this purpose, we apply concepts of information theory to propose a "Chinese black box model," that allows for a non-deterministic, bottom-up approach. Considering a patient as an undeterminable complex system, the process of getting information about an individual in Chinese diagnostics is compared to the input-process-output principle of information theory and quantum physics, which is further illustrated by Wheeler's "surprise 20 questions." In TCM, an observer uses a decision-making algorithm to qualify diagnostic information by the binary polarities of "yang" (latin activity) and "yin" (latin structivity) according to the so called "8 principles" (latin 8 guiding criteria). A systematic reconstruction of ancient Chinese terms and concepts illuminates a scattered scientific method, which is specified in a medical context by Latin terminology of the sinologist Porkert [definitions of the Latin terms are presented in Porkert's appendix [1] (cf. Limitations)].

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3 s.33
• /
• pp.36-48
• /
• 1999

Fatigue life and crack retardation behavior after penetration were experimentally examined using surface pre-cracked specimens of aluminium alloy 5083. The Wheeler model retardation parameter was used successfully to predict crack growth behavior after penetration. By using a crack propagation rule, the change in crack shape after penetration can be evaluated quantitatively. Advanced, waveform-based acoustic emission (AE) techniques have been successfully used to evaluate signal characteristics obtained form fatigue crack propagation and penetratin behavior in 6061 aluminum plate with surface crack under fatigue stress. Surface defects in the structural members are apt to be origins of fatigue crack growth, which may cause serious failure of the whole structure. The nondestructive analysis on the crack growth and penetration from these defects may, therefore, be one of the most important subjects on the reliability of the leak before break (LBB) design. The goal of the present study is to determine if different sources of the AE could be identified by characteristics of the waveforms produced from the crack growth and penetration. AE signals detected in four stages were found to have different signal per stage. With analysis of waveform and power spectrum in 6061 aluminum alloys with a surface crack, it is found to be capabilities on real-time monitoring for the crack propagation and penetration behavior of various damages and defects in structural members.

• Journal of Korea Society of Industrial Information Systems
• /
• v.5 no.1
• /
• pp.102-107
• /
• 2000

In general text compression techniques cannot be used directly in image compression because the model of text and image are different Recently, a new class of text compression, namely, block-sorting algorithm which involves Burrows and Wheeler transformation(BWT) gives excellent results in text compression. However, if we apply it directly into image compression, the result is poor. So, we propose simple method in order to improve the lossless compression performance of image. The proposed method can be divided into three steps. It is decomposed into ten subbands with the help of symmetric short kernel filter. The resulting subbands are block-sorted according to the method by BWT, and the redundancy is removed with the help of an adaptive arithmetic coder. Experimental results show that the proposed method is better than lossless JPEG and LZ-based compression method(PKZIP).

• Safety and Health at Work
• /
• v.8 no.2
• /
• pp.206-211
• /
• 2017

Background: Self-reported low back pain (LBP) has been evaluated in relation to material handling lifting tasks, but little research has focused on relating quantifiable stressors to LBP at the individual level. The National Institute for Occupational Safety and Health (NIOSH) Composite Lifting Index (CLI) has been used to quantify stressors for lifting tasks. A chemical exposure can be readily used as an exposure metric or stressor for chemical risk assessment (RA). Defining and quantifying lifting nonchemical stressors and related adverse responses is more difficult. Stressor-response models appropriate for CLI and LBP associations do not easily fit in common chemical RA modeling techniques (e.g., Benchmark Dose methods), so different approaches were tried. Methods: This work used prospective data from 138 manufacturing workers to consider the linkage of the occupational stressor of material lifting to LBP. The final model used a Bayesian random threshold approach to estimate the probability of an increase in LBP as a threshold step function. Results: Using maximal and mean CLI values, a significant increase in the probability of LBP for values above 1.5 was found. Conclusion: A risk of LBP associated with CLI values > 1.5 existed in this worker population. The relevance for other populations requires further study.

• Restorative Dentistry and Endodontics
• /
• v.24 no.1
• /
• pp.67-75
• /
• 1999

The use of composite restorative materials is established due to continuing improvements in the materials and restorative techniques. Composite resins are widely used for the restoration of cervical lesions because of esthetics, good physical properties and working time. There are several types of cavity design for class V composite resin filling, but inappropriate cavity form may affect bonding failure, microleakage and fracture during mastication. Cavity preparations for composite materials should be as conservative as possible. The extent of the preparation is usually determined by the size, shape, and location of the defect. The design of the cavity preparation to receive a composite restoration may vary depending on several factors. In this study, 5 types of class V cavity were prepared on each maxillary central incisor. The types are; 1) V-shape, 2) round(U) shape, 3) box form, 4) box form with incisal bevel and 5) box form with incisal bevel and grooves for axial line angles. After restoration, in order to observe the concentration of stress at bonding surfaces of teeth and restorations, developing a 2-dimensional finite element model of labiopalatal section in tooth, surrounding bone, periodontal ligament and gingiva, based on the measurements by Wheeler, loading force from direction of 45 degrees from lingual side near the incisal edge was applied. This study analysed Von Mises stress with SuperSap finite element analysis program(Algor Interactive System, Inc.). The results were as follows : 1. Stress concentration was prevalent at tooth-resin bonding surface of cervical side on each model. 2. In model 2 without line angle, stress was distributed evenly. 3. Preparing bevel eliminated stress concentration much or less at line angle. 4. Model with round-shape distributed stress concentration more evenly than box-type model with sharp line angle, therefore decreased possibility of fracture. 5. Adding grooves to line angles had no effect of decreasing stress concentration to the area.

• Journal of Distribution Research
• /
• v.15 no.5
• /
• pp.127-153
• /
• 2010

This study explores the locomotives of the growth in the Korean online shopping industry upon the theoretical basis based on the last 10 years' rapid changing environment. This attempt reveals the counter-arguments against preemtive effects based on the observation of reintermediation process in the online industry. We reviewed the NEBIC model proposed by Wheeler(2002) and propose the growth model, double helix framework based on the dynamic capability view. Furthermore the relevance of the proposed framework was validated with the review of last 10 years' sales and market share data in the online shopping industry. Meanwhile we found the limits of online market growth with the open market domination. So future of the online shopping retailers is depending on the development of the channel functions and merchandising on the basis of self-capability. Based on the tentative conclusion, we also suggest implications for the policy makers. Firstly policy facilitating the specialization of the power sellers incubased in the open market is necessary for the sustainable online market growth. And the establishment of the control tower is suggested to coordinate the consistency of the policies and regulations. And the device of the incentive is also proposed to strengthen the open markets' function to facilitate the small and medium online merchants.