• 한국수소및신에너지학회논문집
• /
• 제25권4호
• /
• pp.344-354
• /
• 2014

Activated charcoal supported nickel molybdenum carbide (carburized Ni-Mo/AC) catalysts were prepared by wet-impregnation followed by temperature-programmed carburization using 20% $CH_4/H_2$ gas. The effects of pH and initial Ni/Mo mole ratio during wet-impregnation step on the characteristics of the carburized Ni-Mo/AC catalysts were investigated using ICP, XRD, XPS, BET and $CO_2$-TPD techniques, and correlated with the catalytic activity of the carburized Ni-Mo/AC in methane dry reforming reaction. Comparison of the results of methane dry reforming reaction kinetics with the results of characterization of the carburized Ni-Mo/AC catalyst showed that the catalytic activity in methane dry reforming reaction was higher at higher initial Ni/Mo mole ratio or at lower pH(3~natural value). This phenomenon was related to the crystal size of metallic Ni in the carburized Ni-Mo/AC catalyst.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2011년도 추계학술논문집 1부
• /
• pp.280-282
• /
• 2011

Silica-gold composite particles were prepared by wet chemical route including impregnation method. Obtained composite particles were characterized using FE-SEM, and XPD.

• 한국재료학회지
• /
• 제11권10호
• /
• pp.846-850
• /
• 2001

In the present study, nano-size powders of ternary ferrites, $Ni_{0.5}Zn_{0.5}Fe_2O_4$, as the potential catalysts of $CO_2$decomposition, were prepared by the wet processing of hydrothermal synthesis and coprecipitation method, and the catalyzing effects of impregnation of the noble metals, Pt and Pd, onto $Ni_{0.5}Zn_{0.5}Fe_2O_4$for the $CO_2$decomposition were investigated. XRD results of the synthesized ferrites showed a typical spinel structure of ferrite and the particle size was very small as about 6~10 nm. BET surface area of the ternary ferrites was not affected by the impregnation of Pt and Pd. The reactivity of the $CO_2$decomposition to carbon was improved by the impregnation of the noble metals of Pd and Pt. The effect of Pd-impregnation on the $CO_2$decomposition rate was higher than Pt-impregnation.

• Design & Manufacturing
• /
• 제14권4호
• /
• pp.11-16
• /
• 2020

In this study, forming of carbon composite parts was performed using an injection/compression molding process. An impregnation of matrix is determined by ability of wet and flow rate between the matrix and reinforcement. The flow rate of matrix passing through the reinforcements is a function of permeability of reinforcement, a viscosity of matrix and pressure gradient on molding, and the viscosity of the matrix depends on the mold temperature, molding pressure and shear strain of matrix. Therefore, compression molding experiment was conducted using a heating mold in order to confirm the possibility of matrix impregnation. The impregnation of the matrix through the porosities between the woven yarns was confirmed by the cross-sectional SEM image of compression molded parts. An injection molding process was also performed at a short cycle time, high molding pressure and low mold temperature than those of compression experiment conditions. Deterioration of impregnation on the surface of molded parts were caused by these injection conditions and it could be the reason of decreasing the maximum tensile strength. In order to improve impregnation of matrix on the surface, injection/compression molding and insert-over molding were applied. As a result of applying injection/compression molding and insert-over molding, it was shown that the improvement of impregnation on the surface and the maximum tensile strength was increased about 2.8 times than the virgin matrix.

• Journal of Species Research
• /
• 제12권3호
• /
• pp.203-211
• /
• 2023

Five ciliate species of Euplotes were isolated from fresh and coastal water during a sampling survey to identify unrecorded ciliates in South Korea. Their morphology was investigated using live observation, protargol and "wet" silver nitrate staining methods. Brief descriptions and microphotographs of each species and a comparison with related species are provided. Euplotes focardii is characterized by an average size of 65×47 ㎛ after protargol impregnation, 6 dorsal and 3 ventral ridges and dorsal argyrome pattern of double-eurystomus type. Euplotes nobilii shows an average size of 34×20 ㎛ after protargol staining, 6 dorsal and 3 ventral ridges and dorsal argyrome pattern of double-patella type. Euplotes octocarinatus, the only freshwater species described in the present study, is characterized by an average size of 66×46 ㎛ after protargol impregnation, 6 dorsal and 3 ventral ridges and dorsal argyrome pattern of double-patella type. Euplotes petzi has an average size of 43×30 ㎛ after protargol staining, a macronucleus hook-shaped and dorsal argyrome pattern in double-patella type. Euplotes raikovi is characterized by an average size of 40×24 ㎛ after protargol staining, 6 dorsal and 3 ventral ridges and dorsal argyrome pattern of double-patella type.

• 한국수소및신에너지학회논문집
• /
• 제28권2호
• /
• pp.129-136
• /
• 2017

Characteristics of $ZrO_2$ felt supported Cu/Zn catalysts have been investigated for the production of hydrogen via methanol steam reforming. Cu and Zn in different weight percent were loaded using wet impregnation over $ZrO_2$ felt support. The catalysts were characterized with BET and FE-SEM. The performance of these synthesized catalysts were investigated at SCR=1.5, $GHSV=2000h^{-1}$, temperature=$300{\sim}400^{\circ}C$, and pressure=2.5~19.5 barA. The results showed that the $Cu^{32.5}Zn^{7.5}ZrO_2$ catalyst was most active in terms of methanol conversion and hydrogen production. The methanol conversion in steam reforming of methanol was 84.6% at 19.5 barA and furnace $400^{\circ}C$ over $Cu^{32.5}Zn^{7.5}ZrO_2$ catalyst. The catalysts prepared using $ZrO_2$ felt show higher reactor temperature than the pellet type catalyst at same furnace temperature.

• Journal of Species Research
• /
• 제11권4호
• /
• pp.278-286
• /
• 2022

During a field survey of Korean marine ciliates, we collected Pleuronema marinum from a brackish water sample. It is characterized by the presence of a contractile vacuole in mid-body, rather than the subterminal/ terminal contractile vacuole as in other congeners. The cells were examined in vivo and based on protargol and 'wet' silver nitrate impregnation. In addition, the nuclear 18S rRNA gene was sequenced using a single cell. The Korean population morphologically and molecularly resembles a Chinese population of P. marinum. Historical review of the species concludes that 1) two or more species have been assigned into P. marinum, 2) the position of contractile vacuole (e.g., in mid-body) is a valid character state, and 3) P. marinum is probably a rare species. Here we provide a monographic treatment of P. marinum to clarify the issue and for further studies of relevant species. Considering there are about 40 nominal species and complex nomenclatural acts in the genus Pleuronema, further studies should provide descriptions based on protargol and 'wet' silver impregnation with marker gene(s).

• 공학논문집
• /
• 제3권1호
• /
• pp.215-222
• /
• 1998

촉매 연소용 촉매 담체인 $\gamma-Al_2O_3$ 분말의 열안정화에 미치는 La과 Si의 첨가 효과에 대하여 연구하였다. 첨가제의 첨가는 습식 impregnation방법으로 행하였고, 출발 물질은 $La(NO_3)_3{\cdot}6H_2O$와 $Si(OC_2H_5)_4$를 사용하였다. 열안정화 효과는 혼합분말을 고온에서 열처리 한 후 비표면적을 측정하여 고찰하였다. 첨가제로 첨가한 La과Si는 모두 순수한 $\gamma-Al_2O_3$분말에 비하여 소결을 억제함으로써 열 안정화 효과가 있음이 확인되었으며, 특히 Si 첨가한 경우에는 $\alpha-Al_2O_3$의 생성을 현저히 억제한다는 것을 확인하였다. 이들 첨가제에 의한 열안정화 효과는 첨가제에 의한 새로운 상의 생성과 표면 확산의 억제등이 주된 요인으로 판단되었다.

• 보존과학회지
• /
• 제6권2호
• /
• pp.126-140
• /
• 1997

과거에는 유적에서 수침목재유물이 발굴되면 적당한 보존처리 방법을 찾지못해 그대로 방치하여 유물을 심하게 손상시키는 경우도 있었다. 1975년 경주 안압지에서 발굴된 목선이 PEG함침법으로 보존처리된 이 후, 대부분의 수침목재유물은 보다 다양하고 과학적인 방법에 의하여 보존처리 되고 있다. 우리나라에서 주로 이용되고 있는 수침목재의 보존처리법은 PEG함침법과 알코올-에테르-수지법, 진공 동결건조법 등이며 근래 유럽과 일본에서 실용화된 슈크로오스와 당-알콜류를 이용한 함침강화법, 고급 알코을 등에 대한 적용방법 연구가 진행되고 있다. 수침목재 보존처리에 있어서 가장 중요한 과제는 우리나라 풍토와 환경조건에 적합하고 물성이 우수한 함침재료와 그 적용방법을 개발하는 것이다. 또 효율적인 보존처리가 이루어질 수 있도록 하기 위해서는 처리대상 유물의 재질적 특성, 함침재료의 물성, 함침과 건조 조건 간의 상호 유기적인 관계를 정확히 파악하는 것이 중요하며 이를 위해 다각적 측면에서의 실험연구가 필요하다.

• 한국표면공학회지
• /
• 제50권6호
• /
• pp.523-530
• /
• 2017

In this study, we developed the h-BN interphase for ceramic matrix composites (CMCs) through a wet chemical coating method, which has excellent price competitiveness and is a simple process as a departure from the existing high cost chemical vapor deposition method. The optimum condition for nitriding an h-BN interphase using boric acid and urea as precursors were derived, and the h-BN interphase coating through a wet method on a carbon preform of 2.5 D was conducted to apply the optimum conditions to the CMCs. In order to control the coating property via the wet coating method, four parameters were investigated such as dipping time of the specimen in the precursor solution, the ratio of boric acid and urea in the precursor, the concentration of solution where the precursor was dissolved, and the cycle of dipping and dry process. The CMCs was fabricated through polymer impregnation and pyrolysis (PIP) processes and a three-point flexural strength test was conducted to verify the role of the coated h-BN interphase.