• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.565-569
• /
• 1999

In these days, the silicone insulators have been increasingly studied and applied for outdoor insulators because it has superior characteristics than porcelain and glass insulators, which have been used for outdoor insulators. First of all, The excellent performance of the silicone rubber in polluted and wet conditions is attributed to the ability of the material to maintain the hydrophobicity of the surface in the presence of severe contamination and wet conditions. This is because of the presence of low molecular weight mobile fluid in the silicone rubber which diffuses to the surface and to above the contamination layer. But, the leakage current and some surface discharge occurs on surface of the composite polymeric insulation materials when the insulator is used for a long time with severe contaminative condition and it can lead the contamination flashover. So the leakage current and the discharge current are important to estimate the condition of the silicone rubber surface. In this paper, the average leakage current, the relation of surface discharge current and phase angle were study to investigate electrical conduction of silicone rubber surface with the salt fog condition.

• 대한화장품학회지
• /
• 제36권2호
• /
• pp.93-97
• /
• 2010

본 연구에서는 샴푸에 널리 사용되는 양이온성 폴리머 중, 양이온성 구아 폴리머를 선택적으로 사용하여, 다양한 성능평가를 통해 0.7 % 질소함량 이상의 치환도와 190~200 cps사이의 점도를 가지는 새로운 양이온성 구아 폴리머를 개발하였다. 성능평가로는 헹굼 시 모발 부드러움(Wet combing ability), 폴리머의 잔존정도와 실리콘의 흡착정도를 측정하였으며 최종적으로 관능평가를 실시하였다. 본 연구에서 개발된 양이온성 구아 폴리머를 배합하면 샴푸 사용감을 최적화할 수 있을 것이다.

• Carbon letters
• /
• 제9권3호
• /
• pp.210-217
• /
• 2008

Petroleum pitch and coke with wet mixture method or with dry mixture method were investigated to develop the composite anodic carbon material of high power lithium ion battery. Cokes coated with pitch were obtained by the heat treatment of mixture of cokes and pitch with different weight ratios at $800{\sim}1200^{\circ}C$. The charge and discharge characteristic of the consequent composite anodic carbon material assembled in batteries was tested. Cokes with wet mixture method have a smooth surface and their capacity changed little with changing temperature and content as compared to the cokes with dry mixture method. Although the reversible capacities showed different values by the anode manufacturing method, the composite anode with the mixture of 20 wt% of petroleum pitch and 80 wt% of coke showed the higher power capability and initial efficiency than the pitch based anode. However, the reversible capacity of the composite anode showed the reduced value as compared with the pitch based anode.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.509-512
• /
• 1999

The main problem in porcelain as a high voltage insulator is that the water film is felled on the insulator surface due to rain, flog, and dew. In the presence of contamination. leakage current increases which may lead to flashover that could be followed by an outage of the power system. These days, high voltage polymer outdoer insulators have been studied and widely used, because they have excellent electrical and mechanical properties, superior performance of flashover for contamination. light weight, easy installation or handling. no maintenance during service, competitive price, and so on. First of a1l the excellent performance of the silicone rubber in polluted and wet conditions is attributed to the ability of the material to maintain the hydrophobicity of the surface in the presence of severe contaminants and wet conditions. This is due to a low surface energy of the silicone rubber. But the leakage current and some surface discharge occurs on the surface of insulator when the insulator is used for a long time. So the leakage current and the surface discharge current are important lo estimate the condition of the silicone rubber surface. In this paper, the average leakage current the surface discharge current the surface rubber surface with the salt fog condition for the first stage.

• 대한금속재료학회지
• /
• 제48권5호
• /
• pp.462-468
• /
• 2010

Carbon Nanotubes (CNTs) have recently emerged as a material with outstanding properties. It has shown promising potential for applications in many engineering fields as electronic devices, thermal conductors, and light-weight composites. Researchers have investigated their use as reinforcements in themetal matrix composites of CNTs. In the present work, we decorated CNTs with Ni particles by electroless plating. The CNTs were wet-ball milled for various milling times with a nickel sulfate solution. The precipitated Ni particles were observed mainly by FESEM. In this study, the dispersion of the CNTs and Ni particles was improved with the addition of the surfactant. Also, as the CNTs were shortened and widened by an increased ball milling time, the size of the precipitated Ni particles increased. It was estimated that the CNTs were deformed and caused some defects on their surface during the ball milling process. Those defects were assumed to be heterogeneous nucleation sites for the Ni particles.

• 한국산림과학회지
• /
• 제104권1호
• /
• pp.60-66
• /
• 2015

본 연구는 희귀식물인 대청부채와 부채붓꽃 종자저장방법과 적절한 차광처리를 구명하여 최적의 발아조건을 탐색하고 건전한 유묘를 확보하기 위해 실시하였다. 종자저장은 $-20^{\circ}C$, $2^{\circ}C$저장, $2^{\circ}C$ 습윤저장(30일, 60일), 노천매장, 상온저장의 6가지로 하였다. 차광처리는 온실내 대조구(무차광처리), 50% 차광처리, 80% 차광처리의 3가지로 하였다. 그 결과 대청부채의 발아율은 60일 저온습윤저장 종자를 파종하여 차광처리 대조구에서 발아시켰을 때 가장 높은 발아율(75%)을 나타내었으며 중간 저장성 종자에 속하는 것으로 생각된다. 부채붓꽃의 발아율은 대청부채와 비슷한 경향으로 60일 저온습윤저장시 90% 이상의 높은 발아율을 보였으며, 80% 차광처리조건에서 가장 높은 발아율(95%)을 나타내었고, 건조한 조건에서 저장이 어려운 난저장성 종자로 생각된다. 대청부채의 유묘 특성은 60일 저온습윤저장 종자를 파종하여 차광처리 대조구에서 발아시켰을 때 초장 6.4 cm, 엽수 3매, 엽폭 4.6 mm, 엽장 5.7 cm, 근장 11 cm, 생중량(지상/지하부) 144 mg/260 mg, 건중량(지상/지하부) 31 mg/20 mg, 유묘활력지수와 변형된 활력지수가 각각 13,895 및 9,479로 가장 우수한 유묘를 확보할 수 있었다. 부채붓꽃의 유묘 특성 또한 60일 저온습윤저장 종자를 파종하여 차광처리 대조구에서 발아시켰을 때 초장 7.2 cm, 엽수 4매, 엽폭 3.2 mm, 엽장 6.8 cm, 근장 7.5 cm, 생중량(지상/지하부) 97 mg/153 mg, 건중량(지상/지하부) 17 mg/17 mg, 유묘활력지수와 변형된 활력지수가 각각 13,256 및 8,668로 가장 우수한 유묘를 확보할 수 있었다. 따라서 대청부채와 부채붓꽃 종자는 60일 저온습윤저장하여 차광처리 대조구에 파종시 각각 75%, 90% 이상의 발아율과 양질의 우수묘 확보가 가능한 것으로 판단된다.

• 한국어류학회지
• /
• 제23권3호
• /
• pp.206-216
• /
• 2011

To investigate seasonal and yearly variation of fishes composition in Yeoja Bay of Korea, fisheries survey were carried out using beam trawl from 2006 to 2009. A total of 44 fish species were collected. The major dominant species were Pennahia argentatus, Thryssa adelae, Thryssa kammalensis and Cynoglossus joyneri, which were occupied over 63% total individuals, and 50% of wet weight. The diversity index (H') was about 1.62 (1.46~1.77) by seasons, and seasons of similarity by fishes were divided into two groups, which were March with December and June with September. ANOVA test showed that there were not significant difference between individuals and catch weight (kg) per unit area (km$^2$) by year and season, except for catch weight per unit area by season.

• 한국안전학회지
• /
• 제31권1호
• /
• pp.61-65
• /
• 2016

In this study, we considered the ignition possibility for the shredded thermoplastic elastomer at the fire ground loaded the waste TPE. The average moisture content of the TPE sample was almost 0.33 wt.% at $110^{\circ}C$ and the range of ignition point was $461.9{\sim}491.9^{\circ}C$ approximately. In addition, we analyzed the change of weight and calorie the TPE sample according to temperature variations using the TG-DTA analyzer. As a result, the weight loss occurred twice in $250{\sim}420^{\circ}C$ and $420{\sim}473^{\circ}C$, and we found the second weight loss temperature range was the ignition point of TPE. Also, we conducted the spontaneous ignition tests of TPE for the wet and dry samples and we confirmed that the possibility of spontaneous ignition of TPE was very low. The elapsed time and humidity had little influence on the spontaneous ignition of TPE in this experimental conditions. In conclusion, the spontaneous of the shredded waste TPE in this study.

• 대한치과보철학회지
• /
• 제36권2호
• /
• pp.355-365
• /
• 1998

The purpose of this study is to evaluate the accuracy of four elastomeric interocclusal recording materials and the weight change according to different storage period (24 hours, 48hours, 7days) and different conditions (dry, wet). The techniques for establishing the intercuspal position were centic occlusion interocclusal record with four elastomeric interocclusal recording materials (Ramitec, Stat-BR, Blu-Mousse, Regisil) (experimental groups) and location of the cast in a position of maximum in-terdigitation using tactile and visual method(control group). To evaluate the accuracy of four elastomeric interocclusal recording materials, the quality of contacts between the mounted casts was compared with the results of an occlusal examination of the same subjects. The results were as follows : 1. The most accurate method of articulating study casts at the intercuspal position was by hand articulation and no significant differences in accuracy were observerd among the experimental groups. 2. In case of interocclusal records storaged in dry sealed plastic box, no significant differences in accuracy were observed among the experimental groups. 3. In case of interocclusal records storaged in water, there was significant inaccuracy in Ramitec group. 4. The biggest weight change was observed in Ramitec group in all storage conditions

• 한국농공학회지
• /
• 제23권1호
• /
• pp.86-102
• /
• 1981

The soil test data of 28 earth dams, scheduled to be constructed in Kore3, were selected for this study. The safety factors of their side slops were computed using Fellenius' "slice Method" by computer. The results summarized in this study are as follows; 1. Dam sections can be easily determined by fig.10 without a time consuming trial and error calculations of assumed sections. 2. For the economical design of earth dam sections, it was found that more cohesive soil was suitable for lower dams(dam height less than 25m) and soils with a higher friction angle was better for higher dams 3. In the case that used soil materials have the same Internal friction angle, side slope increase was almost same. 4. The relationship between side slope and friction angle was found as log.S=a tan ø+b (Fig. 7) 5. The relationship between side slope and cohesion (c) was also found as log. S=a c+b (Fig. 8) 6. The change of safety factors due to the change of central core materials was very little (Table-2) 7. The decrease of safety factors according to the unit weight increase of embankment materials was negligible. 8. In general the relationship between the wet unit weight and the saturated unit weight was r sat = (rt)$^2$+0. 140. This study will contribute to the determination of economic and safe planning and designing of earth dams, embankments and cutting side slopes.