• Korean Journal of Chemical Engineering
• /
• 제35권12호
• /
• pp.2403-2412
• /
• 2018

The present study was aimed at evaluating the effect of variable sodium carbonate ($Na_2CO_3$) loading during wet air oxidation (WAO) pretreatment of rice straw in reducing biomass recalcitrance. The research study was intended to increase the cellulose recovery, hemicellulose solubilization, lignin removal in the solid fraction and limiting the generation of inhibitors in the liquid fraction while reducing the chemical input. The operating condition of $169^{\circ}C$, 4 bar, 18 min and 6.5 g/L $Na_2CO_3$ loading resulted in maximum cellulose recovery of 82.07% and hemicellulose solubilization and lignin removal of 85.43% and 65.42%, respectively, with a total phenolic content of 0.36 g/L in the liquid fraction. The crystallinity index increased from 47.69 to 51.25 along with enzymatic digestibility with an increase in $Na_2CO_3$ loading from 0 to 6.5 g/L as a result of removal of barriers for saccharification via effective cleavage of ether and ester bonds cross-linking the carbohydrates and lignin as indicated by FT-IR spectroscopy. A further increase in the $Na_2CO_3$ loading to 9.5 g/L did not significantly increase the sugar release. Thus, it was concluded that 6.5 g/L $Na_2CO_3$ during WAO is sufficient to increase the delignification and deacetylation, leading to significant changes in apparent cellulose crystallinity inter alia improvement in cellulose accessibility and digestibility of rice straw.

• 청정기술
• /
• 제24권4호
• /
• pp.293-300
• /
• 2018

설파메톡사졸(sulfamethoxazole, SMX)은 박테리아 치료를 위해 사람과 동물에게 널리 사용되어 온 설파아미드계열의 합성 항생제이다. 이들 대부분은 난분해성 물질로서 분해되지 않고 환경생태계에 노출되어 심각한 환경문제를 일으키게 된다. 본 연구에서는 난분해성 SMX를 분해하기 위하여 $Cu/Al_2O_3$ 촉매를 이용한 촉매습식과산화(catalytic wet peroxide oxidation, CWPO) 공정을 수행하였고, SMX를 완전히 분해하기 위한 최적의 온도, 촉매 주입량, 과산화수소($H_2O_2$)의 농도 등을 조사하였다. 1기압, $40^{\circ}C$에서 $H_2O_2$ 0.79 mM과 6 g의 10 wt% $Cu/Al_2O_3$ 촉매를 사용하여 20분 이내에 SMX가 완전히 분해되는 것으로 관찰되었다. 그러나 SMX는 완전히 무기화 되지 못하고, 중간생성물인 hydroylated-SMX, sulfanilic acid, 4-aminobenzenesulfinic acid, nitrobenzene을 거쳐 유기산으로 분해된 후 최종적으로 무기화 되었다. 이들 중간생성물의 거동을 파악하여 SMX의 분해 반응경로를 예측하였고 불균일 촉매의 내구성을 알아보기 위하여 10 wt% $Cu/Al_2O_3$ 촉매를 연속적으로 재사용 하여 SMX 분해율을 조사하였다. SMX의 분해율은 촉매를 5회 이상 재 사용하였을 때 다소 낮아졌지만 촉매의 활성도는 전반적으로 매우 안정적이었다.

• Korean Chemical Engineering Research
• /
• 제43권2호
• /
• pp.206-214
• /
• 2005

$TiO_2$에 담지된 불균일 촉매상에서 ppm 수준으로 존재하는 수중 유기오염물질들을 제거하기 위한 모델반응으로 액상 trichloroethylene(TCE) 분해반응을 선정하였으며, 여러 반응변수의 동시제어가 가능하도록 디자인된 연속 흐름식 고정층 반응기 내에서 incipient wetness 기법으로 제조된 여러 전이금속 산화물 촉매들의 TCE 분해활성을 조사하였다. 선택된 반응조건에서 모델반응의 내부확산저항은 없었으며, $36^{\circ}C$의 반응온도에서 촉매표면에 흡착에 의한 액상 TCE 제거된 정도는 무시할 만하였고 촉매반응에 의해서만 제거될 수 있었다. TCE 제거반응에 대한 촉매들의 활성 및 반응시간에 따른 분해효율의 의존성은 사용된 금속 산화물 및 담지체의 종류에 따라 달라지는 것으로 나타났다. 5 wt.% $CoO_x$/$TiO_2$ 촉매는 본 대상반응에 대하여 가장 우수한 활성을 갖는 것으로 나타났으며, 반응시간의 경과 정도에 따라 TCE 분해효율이 점진적으로 증가하여 안정되는 전이구간의 존재를 확인할 수 있었다. 이와 같은 촉매활성의 반응시간 의존성은 반응 초기와 일정시간 경과 후의 $TiO_2$ 표면에 존재하는 $CoO_x$의 표면구조가 상이할 뿐만 아니라 반응시간 경과와 함께 활성이 더욱 높은 Co species의 표면노출을 암시하고 있다. $NiO_x$, $CrO_x$와 같은 금속 산화물 촉매들의 반응활성은 매우 낮은 수준이었다. $TiO_2$와 MFI를 담지체로 하여 각각 incipient wetness법과 이온교환법으로 제조된 $CuO_x/TiO_2$, Cu-MFI, $FeO_x/TiO_2$ 및 Fe-MFI의 TCE 제거효율을 반응시간의 함수로 살펴본 결과, Cu 촉매들에서 관찰되는 반응시간-분해효율 거동과는 다른 현상이 $FeO_x/TiO_2$와 Fe-MFI 촉매상에서 관찰되었다. $36^{\circ}C$의 반응온도에서 전반응시간 동안에 5 wt.% $FeO_x/TiO_2$ 촉매상에서 TCE 제거반응은 일어나지 않았으나, 1.2 wt.% Fe-MFI의 경우 반응 초기에 높은 제거율을 일정시간 동안 유지하다가 서서히 감소하는 비활성화 현상이 발생하였다. 이는 동일한 활성성분이 사용된다 할지라도 그 제조방법에 따라 촉매활성이 달라질 수 있음을 보여주고 있으며, 액상반응 중에 일어나는 활성성분의 redox cycle이 중요한 역할을 할 수 있음을 암시하고 있다. 가장 우수한 $CoO_x/TiO_2$ 촉매의 TCE 분해활성에 미치는 $CoO_x$ 담지량, 반응온도 등의 영향을 조사한 결과, 최적의 $CoO_x$ 담지량이 존재하였고 반응온도가 높을수록 TCE 제거효율은 높게 나타났다. 반응 중에 $CoO_x$ leaching에 의한 $CoO_x$의 손실이 확인되었으나 TCE 전환율에 영향을 미칠 정도는 아닌 것으로 판단되었다.

• Bulletin of the Korean Chemical Society
• /
• 제24권3호
• /
• pp.400-402
• /
• 2003

• 한국환경과학회지
• /
• 제14권2호
• /
• pp.221-230
• /
• 2005

Catalytic wet oxidation of trichloroethylene (TCE) in water has been conducted using $TiO_2-supported$ cobalt oxides at $36^{\circ}C$ with a weight hourly space velocity of $7,500\;h^{-1}.\;5\%\;CoO_x/TiO_2$, prepared by using an incipient wetness technique, might be the most promising catalyst for the wet oxidation although it exhibited a transient behavior in time on-stream activity. Not only could the bare support be inactive for the wet decomposition reaction, but no TCE removal also occurred by the process of adsorption on $TiO_2$ surface. The catalytic activity was independent of all particle sizes used, thereby representing no mass transfer limitation in intraparticle diffusion. XPS spectra of both fresh and used Co surfaces gave different surface spectral features for each $CoO_x,\;Co\;2P_{3/2}$ binding energy for Co species in the fresh catalyst appeared at 781.3 eV, which is very similar to the chemical states of $CoTiO_x$ such as $CO_2TiO_4\;and\;CoTiO_3$. The used catalyst exhibited a 780.3-eV main peak with a satellite structure at 795.8 eV. Based on XPS spectra of reference Co compound, the TCE-exposed Co surfaces could be assigned to be in the form of mainly $Co_3O_4$. XRD patterns for $5\%\;CoO_x/TiO_2$ catalyst indicated that the phase structure of Co species in the catalyst even before reaction is quite comparable to the diffraction lines of external $Co_3O_4$ standard. A model structure of $CoO_x$ present predominantly on titania surfaces would be $Co_3O_4$, encapsulated in thin-film $CoTiO_x$ species consisting of $Co_2TiO_4$ and $CoTiO_3$, which may be active for the decomposition of TCE in a flow of water.

• 전자공학회논문지A
• /
• 제33A권7호
• /
• pp.149-155
• /
• 1996

A new technique wasdeveloped which obtains selectively the htick fully recessed oxidized porous silicon layer (OPSL) with good dielectric property. The porous silicon layer was ocnverted to thick fully recessed oxide (FRO) with 3-step (1${\mu}$m, 1.5${\mu}$m, 1.8${\mu}$m) by multi-step thermal oxidation (after 400$^{\circ}$C, 1 hour by dry oxidation, 700$^{\circ}$C, 1 hour and then 1100$^{\circ}$C, 1 hour by wet oxidation). The breakdwon field of the FRO was about 2.5MV/cm and the leakage current was several pA ~ 100 pA in the range of 0 of 90 pF. The progress of oxidation of a porous silicon layer was studied by examining the infrared abosrption spectra. The refractive index (1.51) of the fRO, which was measured by ellipsometer, was comparable to that of the thermally grown silicon dioxide (1.46). The etching rate (1600${\AA}$/min) of the FRO was also almost equal to that of the thermal oxide.

• 한국축산식품학회지
• /
• 제44권2호
• /
• pp.430-442
• /
• 2024

This research aimed to assess the effect of collagenolytic proteases from Bacillus subtilis B13 and Bacillus siamensis S6 for tenderizing goat meat during wet aging. Collagenolytic proteases B13 and S6 were prepared at 5 U/mL of collagenolytic activity before injecting into goat meat with 10% (v/w) of initial weight. The control sample was injected with distilled water and used as a negative control. The injected meats were placed in vacuum-sealed bags and wet aged at 4℃ for 0, 3, 5, 7, 14, and 21 days. Thereafter, total aerobic count and physicochemical quality were elucidated. Both enzyme-treated samples from B13 and S6 aged for 5 days showed an acceptable microbial quality with lower than 5.7 Log CFU/g. These conditions produced the tender meats by the reduction in shear force accounting for 30% for B13 and 26% for S6 as compared to the control. Moreover, the enzyme-treated samples showed lower values of hardness, gumminess, and chewiness, with higher springiness and trichloroacetic acid-soluble peptides than the control (p<0.05). The detrimental impact on cooking loss and lipid oxidation was not found. Enzyme-injected meat had a lower cooking loss than the control (p<0.05) with no significant difference in lipid oxidation (p>0.05). Notably, meats treated with B13 and S6 were lower in CIE L^* value as compared to the control (p<0.05) with no significant impact on CIE a^* and CIE b^* (p>0.05). These results suggested that these two collagenolytic proteases could enhance the quality of goat meat in terms of tenderness and reduce the aging time for meat tenderization.

• Journal of Advanced Marine Engineering and Technology
• /
• 제41권3호
• /
• pp.216-221
• /
• 2017

디젤엔진은 내연기관 중에 제동 열효율이 가장 높은 엔진이기 때문에 큰 동력을 필요로 하는 대형트럭과 같은 중 대형 운송 차량 및 선박 등의 수송분야 및 발전시스템 등의 다양한 분야에서 사용되어지고 있다. 하지만, 디젤엔진은 연소과정에서 질소산화물(이하 NOx) 발생량이 많은 단점을 가지고 있다. 따라서 본 연구에서는 선박용 디젤엔진의 NOx를 저감하기 위해서 습식 배기가스 처리 기술인 무격막식 해수 전기분해 방식을 이용하여 NOx 저감을 시도하였다. 실제 해수를 사용하여 디젤엔진에서 배출되는 유해가스에 전기 분해된 해수인 전해수를 분사하여 보았다. 전해수의 pH 농도 및 유효염소농도, 온도에 따른 NO 산화율 및 NOx 감소량을 조사하였다. 본 실험을 통해서 전해수의 pH가 약산성 영역일 경우가 중성일 경우보다 산화탑에서의 NO 산화율이 상승하였고, 유효염소농도가 높을수록 NO 산화율이 증가하는 것을 확인할 수 있었다. 또한, 전해수 온도는 NO 산화율에 영향이 없음을 추가적으로 확인할 수 있었으며 디젤엔진에서 생성된 배기배출물에 전해수를 분사함으로써 NOx가 저감됨을 확인할 수 있었다.

• Journal of Applied Biological Chemistry
• /
• 제42권4호
• /
• pp.175-179
• /
• 1999

Grape seed oil was extracted using different preparatory treatments as follows: (1) grinding, (2) grinding and roasting, (3) grinding and wet- roasting, (4) grinding, roasting, and wet-roasting, and (5) grinding, wet-roasting, and wet-roasting. The highest antioxidant activity was obtained from the sample with the method (2). Initial states of oxidation were similar except method (1) that showed more oxidized state, being P.O.V.8. Acid values were observed in the range from 1.42 to 1.89. The lowest acid value was found as 1.42 in method (1) and those of others were somewhat higher, indicating that heating process of roasting produced some free fatty acids. From the results of sensory evaluation, the best odor and taste were obtained from the methods (2) and (3). Repetitive procedure of wet-roasting, like method 5, caused some loss of flavor components and decrease in the sensory evaluation score. Addition of grape seed oil (method 2) to soybean and perilla oil at the level of 20% retained considerable antioxidant activities as much as 4.3 and 5 times, respectively, than 100% soybean or perilla oil stored for 12 weeks. When soybean or perilla oil was mixed with 20% grape seed oils, P.O.V. decreased to half of that of unmixed oils.

• 한국응용과학기술학회지
• /
• 제24권1호
• /
• pp.1-9
• /
• 2007

It prepared the $TiO_2$ powder which has photo-catalytic activity in the visible-light by the wet process with titanium oxysulfate. The titanium $dioxide(TiO_2)$ by the wet process creates a new absorption band in the visible light region, and is expected to create photocatalytic activity in this region. Anatase $TiO_2$ powder which has photocatalytic activity in the visible light region, is treated using microwave and radio-frequency(RF) plasma. But, the $TiO_2$ powder for the visible light region, which also can be easily produced by wet process. The wet process $TiO_2$ absorbed visible light between 400nm and 600nm, and showed a high activity in this region, as measured by the oxidation removal of aceton from the gas phase. The AH-380 sample appears the yellow color to be strong, the catalytic activity in the visible ray was excellent in comparison with the plasma-treated $TiO_2$. The AH-380 $TiO_2$ powder, which can be easily produced on a large scale, is expected to have higher efficiency in utilizing solar energy than the plasma-treated $TiO_2$ powder.