• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.887-892
• /
• 2014

In a conventional magnetic abrasive polishing process, the polishing abrasives are mixed with ferrous particles and slight cutting oil to form a cluster of abrasives. However, when a tool rotates at a high revolution speed, most of the polishing abrasives are scattered away from it due to the increase in centrifugal force. This phenomenon directly reduces the polishing efficiency. The use of a highly viscous matter such as silicone gel instead of cutting oil for mixing is one method to solve this problem and increase abrasive adhesion. Another method to avoid high abrasive scattering is the application of wet magnetic abrasive polishing (WMAP). In WMAP, abundant mineral oil is preliminarily applied to the workpiece surface. This study experimentally evaluated the effect of WMAP on abrasive adhesion. The relationship between the amount of working abrasives and polishing conditions was characterized. Despite the lower adhesion ratio of polishing abrasives, the surface roughness was found to be significantly improved as the result of WMAP.

• 한국연소학회:학술대회논문집
• /
• 2006.10a
• /
• pp.235-241
• /
• 2006

Catalytic combustion is one of the suitable methods for micro power source due to high energy density and no flame quenching. Catalyst loading in the micro structured combustion chamber is one of the most important issues in the development of micro catalytic combustors. In this research, to coat catalyst on the chamber wall, two methods were investigated. First, $Al_2O_3$ was selected as a support of Pt and $Pt/Al_2O_3$ was synthesized through the alumina sol-gel procedure. To improve the coating thickness and adhesion between catalyst and substrate, heat resistant and water solvable organic-inorganic hybrid binder was used. Porous silicon was also investigated as a catalyst support for platinum. Through the parametric studies of current density and etching time, fabrication process of $1{\sim}2{\mu}m$ of diameter and about $25{\mu}m$ depth pores was confirmed. Coated substrates were test in the micro channel combustor which was fabricated by the wet etching and machining of SUS 304. Using $Pt/Al_2O_3$ coated substrate and Pt coated porous silicon substrate, conversion rate of fuel was over 95% for $H_2$/Air premixed gas.

• Korean Journal of Crystallography
• /
• v.3 no.1
• /
• pp.1-8
• /
• 1992

The morphology of lead titanate powders prepared by sol-gel and coprecipitation techniques was investigated as a function of firing temperature and soaking time. PbTiO3 precursor powders were derived from a mixed solution of lead nitrate and titanium tetrachloride at 40℃ to 43℃ and pH of 9.0 to 9.7, and fired at temperatures 350-1000℃ for 1-10h in air. An increase of particle size and agglomeration with increasing calcination temperature and duration could be observed. By annealing sol-gel derived powder at 700℃, the tially-formed acicular(and/or prismatic) primary particles transformed to polyhedral shape with soaking time, and further soaking caused coarsening the polyhedral particles with rounded edges. However, the morphology of the coprecipitated powders was not varied during crystallization.

• Journal of the Korean Ceramic Society
• /
• v.30 no.4
• /
• pp.299-308
• /
• 1993

Dispersant was used to avoid the agglomeration of aluminum hydrate precipitate and improve the sinterability of calcined alumina powder. The mean particle size of the aluminum hydrate precipitates was 0.26${\mu}{\textrm}{m}$ and 0.44${\mu}{\textrm}{m}$ when ball-milled with and without dispersant, respectively. After calcination at 110$0^{\circ}C$ for 5 hours, the size of the alumina powder without dispersant increased to 0.84${\mu}{\textrm}{m}$, while with dispersant slightly decreased to 0.22${\mu}{\textrm}{m}$. The most thermally active alumina powder was obtained from the sample calcined at 110$0^{\circ}C$ for 5 hours with the 1% dispersant concentration. Using the calcined alumina powder at the above optimized condition, the specimen showed fired density of 3.94g/㎤, 4-point MOR of 364MPa, and KIC of 3.26MPam1/2 after sintered at 155$0^{\circ}C$ for 3 hours.

• Microbiology and Biotechnology Letters
• /
• v.13 no.1
• /
• pp.87-91
• /
• 1985

Hpa I endonuclease from Haemophilus parainfluenzae has been purified of homogeneity and its physical and ezymatic properties have been studied. For the purification of the enzyme, Heparin agarose, SP-sephadex C-25, DEAE-sephadex A-50 and phosphocellulose chromatography columns were used. The denatured and reduced form of the enzyme is a monomer of molecular weight of $30,000{\pm}1,000$ as judged by 10% polyacrylamide gel electrophoresis containing 0.1% sodium dodesyl sulfate. Hpa I endonuclease was maximally active at neutral pH (7.0 to 7.5) in the presence of 50 mM NaCl.

• Journal of the Korean Society of Combustion
• /
• v.11 no.2
• /
• pp.7-14
• /
• 2006

Catalytic combustion is one of the suitable methods for micro power source due to high energy density and it can be applied to micro structured chamber without consideration of quenching since it is flameless combustion. Catalyst loading in the micro structured combustion chamber is one of the most important issues in the development of micro catalytic combustors. In this research, to coat catalyst on the chamber wall, two methods were investigated. First, $Al_2O_3$ was selected as a support of Pt and $Pt/Al_2O_3$ was synthesized through the alumina sol-gel procedure. To improve the coating thickness and adhesion between catalyst and substrate, heat resistant and water solvable organic-inorganic hybrid binder was used. Porous silicon was also investigated as a catalyst support for platinum. Through the parametric studies of current density and etching time, fabrication process of $1{\sim}2{\mu}m$ of diameter and about $25{\mu}m$ depth pores was confirmed. Coated substrates were test in the micro channel combustor which was fabricated by the wet etching and machining of SUS 304. Using $Pt/Al_2O_3$ coated substrate and Pt coated porous silicon substrate, conversion rate of fuel was over 95 % for $H_2/Air$ premixed gas.

• Korean Journal of Materials Research
• /
• v.23 no.1
• /
• pp.72-80
• /
• 2013

Recently, consumption of magnesium alloys has increased especially in the 3C (computer, communication, camera) and automobile industries. The structural application of magnesium alloys has many advantages due to their low densities, high specific strength, excellent damping and anti-eletromagnetic properties, and easy recycling. However, practical application of these alloys has been limited to narrow uses of mild condition, because they are inferior in corrosion resistance and wear resistance due to their high chemical reactivity and low hardness. Various wet and dry processes are being used or are under development to enhance alloy surface properties. Various conversion coating and anodizing methods have been developed in a view of eco-friendly concept. The conventional technologies, such as diffusion coating, sol-gel coating, hydrothermal treatment, and organic coating, are expected to be newly applicable to magnesium alloys. Surface treatments for metallic luster or coloring are suggested using the control of the micro roughness. This report reviews the recent R&D trends and achievements in surface treatment technologies for magnesium alloys.

• Journal of the Korean Ceramic Society
• /
• v.44 no.5 s.300
• /
• pp.151-154
• /
• 2007

Yttrium aluminum garnet, $Y_3Al_5O_{12}$ (YAG) is an extensively used solid-state laser host material. YAG nanocrystals were synthesized using low-temperature glycol method, a modified sol-gel method performed at low temperature that consists of a mixture of salts that are mostly nitrates in an aqueous media. Single-phase nanocrystalline YAG was obtained at $850^{\circ}C$, which is a much lower temperature than with other techniques such as a wet-chemical technique. The structural characterization is done by powder X-ray diffraction, scanning electron microscopy and transmission electron microscopy. A crystallite size range of 20-50 nm was observed for the materials prepared at $850-950^{\circ}C$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.1
• /
• pp.60-66
• /
• 1996

Bradyrhizobium japonicum with different colony morphology populated in five Yeongnam soils of Korea was examined for intrinsic antibiotic resistance to eight antibiotics, serological property by immunoblot and immunodiffusion, and protein profile differentiation by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Colony morphological distribution of one hundred and twenty B. japonicum isolates was 47% for "dry". 41% for "wet", and 12% for "dry/wet" type. The total isolates showed such a strong correlation between the morphology and antibiotic resistance. Colony morphology, which though was dominantly consisted of the same type within a serogroup, wasn't absolutely linked to serological property of B. japonicum. Based on these data, colony morphology was too simple to identify variations with B. japonicum isolates : antibiotic resistance such complicated compared with serological analyses.

• Journal of the Korean Electrochemical Society
• /
• v.8 no.2
• /
• pp.77-81
• /
• 2005

Porous-composite electrodes have been developed using silica gel, which reduce carbon aerogel usage with high cost. Silica gel powder was added to the carbon aerogel to simplify the manufacturing procedure and to increase the wet-ability, the mechanical strength and the CDI efficiency. Porous composite electrodes composed of carbon aerogel and silica gel powder were prepared by paste rolling method. Carbon aerosol composite electrodes with $10\times10cm^2$ are placed face to face between spacers, and assembled the four-stage series cells for CDI process. Each stage is composed of 45 cells. Four-stage series cells (flow through cells) for CDI process are put in continuous-system reactor containing 1,000ml-NaCl solution bath of 1,000 ppm. The four-stage series cells with carbon aerogel electrodes are charged at 1.2V and are discharged at 0.001V, and then read the current. Conclusively, removal efficiencies of ions using the four-stage series cells composed of carbon aerogel composite electrodes show good removal efficiency of $99\%$ respectively.