• Tribology and Lubricants
• /
• v.33 no.2
• /
• pp.71-78
• /
• 2017

The drag torque in the wet clutch system of a dual clutch transmission system is investigated because it is relatively high, up to 10 of the total output torque of the engine, even when the clutch is in the disengagement state with zero torque transfer. Drag torque results from the shear resistance of the DCTF between the friction pad and separator plate. To reduce the drag torque for ensuring fuel economy, the groove pattern of the wet clutch friction pad is designed to have a high flow rate through the pattern groove. In this study, four types of groove patterns on the friction pad are designed. The volume fraction of the DCTF (VOF) and hydrodynamic pressure developments in the gap between the friction pad and separator plate are computed to correlate with the computation of the drag torque. From the computational results, it is found that a high VOF and hydrodynamics increase the drag torque resulting from the shear resistance of the DCTF. Therefore, a patterned groove design should be used for increasing the flow rate to have more air parts in the gap to reduce the drag torque. In this study, ANSYS FLUENT is used to solve the flow analysis.

• Journal of Veterinary Clinics
• /
• v.27 no.1
• /
• pp.121-124
• /
• 2010

Thermal burn occurred in the anesthetized dog as a result of using hot pack to treat hypothermia. After hospital discharge, thermal burn leaded to secondary infection due to dog bites of the other dog in the house. After secondary infection, the treatment was performed with medication and bandaging. Because of the pain and infection from the wound, carprofen (2 mg/kg bid) and amoxicillin (20 mg/kg bid) were administrated orally for 40 days. And for 35 days, wet-to-dry gauze dressing was used to absorb purulent exudate. During this period, the burn eschar was removed completely from the burn site. After 35 days, the hydrophilic polyurethane foam ($Medifoam^{(R)}$, Ildong Pharm, Co., Korea) was admitted to the burn site for 30 days. $Medifoam^{(R)}$ made healing rate of the wound faster because the inner layer did not adhered to the wound, and newly formed tissue was protected. The second layer, hydrophilic absorptive layer absorbed excessive fluid and kept the wound surface moist. After 65 days after thermal burn, the wound was healed completely.

• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.E1
• /
• pp.1-12
• /
• 2002

One technique for determining dry acid deposition fluxes involves measurement of time - averaged ambient concentrations of dry acid deposition species using filter packs (FP) coupled with estimates of mean deposition velocities for the exposure period. A critical problem associated with filter pack data comparisons between various field sampling networks is the use of diverse sampling flow rates and duration protocols. Field experiments were conducted to evaluate the effects of varying sampling flow rates, from 1.5 to 10 standard liters per minute, on total nitrate and sulfate measurements of specific dry acid deposition species . Collocated FP samplers were used to determine sampling and analysis data reproducibility and representativeness . Ambient air samples were simultaneously collected using groups of filter packs operated at various flow rates over identical 7 day periods. The species measured were sulfur dioxide, particulate sulfate , nitric acid and particulate nitrate. Statistical results (ANOVA; alpha level 5%) showed that neither the low nor high sampling flow rates caused a significant difference in the measurements of total sulfate and adjusted total nitrate (ATN) . However, it was concluded that for high flow rate sampling measurements, total nitrate (TN) could be affected during extended sampling durations because of potential nitric acid overloading and breakthrough. Although the previous workers (Costello, 1990; Quillian, 1990) used much higher sampling flow rates (~ 17 sLpm) than employed here, it was assumed that for a high loading (> 50$\mu\textrm{g}$ HNO$_3$) of nitric acid on the Nylon filters, a significant fraction (~10%) of nitric acid could pass through the Nylon filters and be collected on the carbonate impregnated filters. It was concluded that even at the highest sampling flow rate employed (10 sLpm) at the Cary Forest site, nitric acid breakthrough was less than 10% of the total HNO$_3$ collected. However, for a heavily polluted urban airshed or with longer sampling times , higher filter loadings could result in substantial nitric acid breakthrough and HNO$_3$concentrations would be underestimated.

• Journal of Naturopathy
• /
• v.10 no.2
• /
• pp.71-76
• /
• 2021

Background: The understanding of back-pain as one of the commonest clinical presentations, made the path to the present study. More than three-quarters of the world's population experience back-pain at some time in their lives Purpose: The present study has evaluated the selected Naturopathic therapeutic procedures on individuals with low back-pain. Methods: Thirteen patients were selected for the study and randomly divided into two groups, viz., Group A, Naturopathic group and Group B, Control group. One patient discontinued. Naturopathic group was treated with mud pack, aromatherapy massage with Eucalyptus oil, acupressure, steam, wet trunk pack, exercises, relaxation and breathing exercises. Advice for life style and diet was given for patients of both the groups. The effect of the therapy was assessed subjectively and objectively. Particular scores drawn for Naturopathic group and control group were individually analyzed before and after treatment and the values were compared using standard statistical protocols. Results: Naturopathic intervention revealed 100% relief in both subjective and objective parameters (i.e., 6 out of 14 parameters showed statistically highly significant P < 0.01 results, while 8 showed significant results P < 0.05). Conclusion: Statistically highly significant results of this study point out the successful management of the multi factorial low back-pain with a multi focused Naturopathic treatment approach. Such encouraging results may pave the way for a future study on a large sample in a longer duration incorporating clinical investigations.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.11 s.158
• /
• pp.1531-1537
• /
• 2006

This study was conducted to investigate the relation between clothing pressure and subjective sensation exerted by foundation. Nineteen females volunteered as subjects. Experimental foundations were brassiere with 70B, 70C, 75B and 75C size which were widely distributed in pilot test and two types of girdle of which size were 64, 70 and 76. Clothing pressure with an air pack system and subjective sensation were measured at 5 points in brassiere and 7 points in the girdle. As the result of this study, brassiere's band and girdle's waist line, of which clothing pressure are high, is needed to improve. Generally the more pressure makes the more tightness, however, in some regions more or less pressure can give comfort. The tightness rating may not only related to clothing pressure, but also related to factors such as body size, body fat, resilience of muscle and bone structure. Other subjective sensation such as tactile feeling, hot/wet feeling, etc. in addition to the study with consideration of these factors could be used in future research to evaluate the effectiveness of foundation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.1 s.109
• /
• pp.17-24
• /
• 2005

The increase of using low grade ace, the unsorted mixed grade, as fibrous raw materials for the packaging paper results in the increment of fine screen reject owing to the strong tendency to reduce the slot width. Since the most of screen reject consists of undispersed fiber flake, the suitable treatment of the flake could increase the yield of ace recycling and decrease the amount of solid waste. In this work, the novel method combined the mild mechanical treatment by using Tumbling pulper with the biological treatment was developed and applied to the wet strength flake and the fine screen tail line reject originated from a packaging paper mill. The results showed the new method could provide much better efficiency for the disintegration of undispersed flake and for the recovery of fiber from the rejects. The application of the laboratory scaled-Pack pulper showed the possible separation technique for mill application by fractioning effectively the fiber from the treated solid waste.

• Korean Journal of Remote Sensing
• /
• v.23 no.6
• /
• pp.507-520
• /
• 2007

Satellite passive microwave(PM) sensors have been observing polar sea ice concentration(SIC), ice temperature, and snow depth since 1970s. Among them SIC is playing an important role in the various studies as it is considered the first factor for the monitoring of global climate and environment changes. Verification and correction of PM SIC is essential for this purpose. In this study, we calculated SIC from KOMPSAT-1 EOC images obtained from Arctic sea ice edges from July to August 2005 and compared with SSM/I SIC calculated from NASA Team(NT) algorithm. When we have no consideration of sea ice types, EOC and SSM/I NT SIC showed low correlation coefficient of 0.574. This is because there are differences in spatial resolution and observing time between two sensors, and the temporal and spatial variation of sea ice was high in summer Arctic ice edge. For the verification of SSM/I NT SIC according to sea ice types, we divided sea ice into land-fast ice, pack ice, and drift ice from EOC images, and compared them with SSM/I NT SIC corresponding to each ice type. The concentration of land-fast ice between EOC and SSM/I SIC were calculated very similarly to each other with the mean difference of 0.38%. This is because the temporal and spatial variation of land-fast ice is small, and the snow condition on the ice surface is relatively dry. In case of pack ice, there were lots of ice ridge and new ice that are known to be underestimated by NT algorithm. SSM/I NT SIC were lower than EOC SIC by 19.63% in average. In drift ice, SSM/I NT SIC showed 20.17% higher than EOC SIC in average. The sea ice with high concentration could be included inside the wide IFOV of SSM/I because the drift ice was located near the edge of pack ice. It is also suggested that SSM/I NT SIC overestimated the drift ice covered by wet snow.

• Journal of Internet of Things and Convergence
• /
• v.9 no.1
• /
• pp.57-64
• /
• 2023

In this paper, we propose a smart umbrella stand based on the Internet of Things (IoT) that helps people to pack their umbrellas more easily. The proposed smart umbrella stand offers three functions. First, it receives weather information, and a hidden umbrella handle will automatically become visible when it rains, making it easier to grab. Second, the smart umbrella stand is equipped with a heated air system, allowing it to effectively dry umbrellas that have become wet due to rain. This makes it more convenient for users to dry and store their rain-soaked umbrellas. Third, the smart umbrella stand enables users to monitor its current status, track weather conditions, and monitor the water level in the rain gutter through a dedicated application. The proposed smart umbrella stand aims to bring convenience to daily life by making it more convenient to carry an umbrella on rainy days or days with a high probability of rain.