• International Journal of Korean Welding Society
• /
• 제3권2호
• /
• pp.29-39
• /
• 2003

The durability and reliability of thermal barrier coatings (TBCs) play an important role in the service reliability, availability and maintainability (RAM) of hot­section components in advanced turbine engines for aero and utility applications. Photostimulated luminescence spectroscopy (PSLS) and electrochemical impedance spectroscopy (EIS) are being concurrently developed as complimentary non­destructive evaluation (NDE) techniques for quality control and life­remain assessment of TBCs. This paper overviews the governing principles and applications of the luminescence and the impedance examined in the light of residual stress, phase constituents and resistance (or capacitance) in TBC constituents including the thermally grown oxide (TGO) scale. Results from NDE by PSLS and EIS are discussed and related to the microstructural development during high temperature thermal cycling, examined by using a variety of microscopic techniques including focused ion beam (FIB) in­situ lift­out (INLO), transmission and scanning transmission electron microscopy (TEM and STEM).

• 대한기계학회논문집A
• /
• 제26권2호
• /
• pp.300-307
• /
• 2002

Partial penetration welding joint is defined as groove welds welded from one side, without steel backing or groove welds welded from both sides but without back gouging. So it has an unwelded portion at the root of the weld. Study of partial penetration weldment fracture behavior includes residual stress analysis and fracture analysis. The J-integral loses its path independency in residual stress field. Therefore, it is necessary to introduce a new J-integral, J, which is defined including the effect of plastic deformation and thermal strain. In this study, theoretical formulation and program were developed for the evaluation of J-integral for the crack tip located in the weldment. Evaluations of fracture behavior were performed for partial penetration multi-pass weldment of 25.4mm thick plate by J-integral. From a point of fracture in partial penetration multi-pass welding, it seemed to be better to control root face smaller than 6.35mm.

• 대한조선학회논문집
• /
• 제53권4호
• /
• pp.275-281
• /
• 2016

One of the most important things for quality to meet ship-production schedule is an accuracy control. A ship is assembled by welding through whole production process, so it is important that loss by correction will not happen as much as possible by using some engineering skills like reverse design, reverse setting and margin for thermal shrinkage. These efforts are a quite effective in fabrication stages, but not in erection stages. If a ship block which consists of common steel is exposed to directional solar radiation, its dimensional accuracy will change high as time by its thermal expansion coefficient. Therefore, the measuring work would be often done at dawn or evening even with having a very accurate device. In this study, an FE analysis method is developed to solve this problem. It can change measured data affected by solar thermal distortion to ones not, even though ship-block is measured at an arbitrary time. It will use the time when measuring, the direction of block and the weather record by satellites. It is confirmed by a comparison between measured data of a ship-block and the result by suggested analysis method. Furthermore, a pre-processing system is also developed for fast application of the suggested analysis method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.950-955
• /
• 2005

This paper describes an intelligent filler wire feeding device which can control 3- dimensional seam tracking and the filler wire speed by measuring the gap position and the joint gap width in laser welding. By means of visual sensor controlled filling the missing material into the joint gap and 3 dimensional seam tracking, lineup errors from manufacturing tolerances and the repeatability of lineup jigs and weld robot can be balanced and at an even seam quality which avoids weld defects. In this paper, we assessed weld quality in 2mm sheets of A16061 which had various gap width by using the intelligent filler wire feeding device.

• 융합신호처리학회논문지
• /
• 제19권2호
• /
• pp.61-67
• /
• 2018

용접예열은 본 용접 전에 금속이 융착되는 모재면을 일정한 온도로 가열하는 것을 의미한다. 냉각속도 조절에 따른 재료 경화 정도 감소, 불순물 편석억제, 열적 변형방지, 그리고 수분제거 등 인접 영향부의 균열을 방지할 수 있다. 이러한 이유에서 고품질의 용접을 위하여 반드시 필요한 작업이다. 유도가열은 전자기유도 현상을 응용하여 전기에너지를 열에너지로 변환시키는 효율적인 가열방식이다. 기체 및 액체를 이용한 연소발열과 비교하여 신속한 가열뿐만 아니라 청결하고, 안정적이며, 경제적이다. 단순한 구조로 주파수와 코일의 형태를 변형하여 가열체의 형상, 깊이, 재질에 관계없이 가열할 수 있다. 본 논문에서는 유도가열 기법을 이용하여 저주파 용접예열 시스템을 구현하였으며, 3종의 자동차 변속기 부품을 대상으로 권선코일 내에서 각 변속기 높이에 따라 권선코일 저항, 인덕턴스 및 자동차 변속기 부품의 온도변화를 관찰한 결과 전류의 변화는 저주파 가열에 있어 매우 중요한 요인으로 작용함을 확인하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.32-32
• /
• 2009

Electric Resistance Welding (ERW) process is the most efficient process to manufacture the linepipe. To develop the high performance ERW linepipe using the high strength and the high alloy steels, the modulation of input power waveform such as sinusoidal waveform is introduced because the conventional ERW technology is not sufficient enough to produce the high quality linepipe due to its strength and high alloy contents (high Ceq). In this article, the material used for the experiment was API X60 with 8.2mm thickness, and ERW simulator at POSCO was used to develop a waveform control system for the power modulation. The frequency of power modulation was varied from 50Hz to 150Hz with the fixed amplitude of ${\pm}2%$ power. The non-modulated power input and the modulated power input cases are conducted to demonstrate the variation of the narrow gap length and the arcing frequency due to power modulation. From results of the non-modulated power input case, the excessive power causes the longer narrow gap length and the low arcing frequency due to the large heat input and the strong electro magnetic force that increase the weld defect. On the contrary, the small narrow gap length and the high arcing frequency reduce the weld defect. After modulating the power input with 50Hz and 100Hz at the fixed power, the arcing frequency increases, but the narrow gap length does not change much. The high arcing frequency prevents the formation of weld defect because the sweeping frequently cleans the oxides on the narrow gap edges. As a result, the manufacturing window can be expanded by the power modulation that provides the stable ERW process for the quality improvement of the linepipe made from the high strength/high alloy steels.

• 한국생산제조학회지
• /
• 제9권6호
• /
• pp.89-95
• /
• 2000

In order to achieve effective prediction of residual stresses, the series experiment were carried out and the residual stresses were measured using the backgpropagation algorithm from the neural network and the sectional method. Using the experimental results, the optimal control algorithms using a neural network should be developed in order to reduce the effect of the external disturbances on residual stresses during GMA welding processes. The results obtained from the comparison between the measured and calculated results, showed that the neural network based on backpropagation algorithm can be sued in order to control weld quality. This system can not only help to understand the interaction between the process parameters and residual stress, but also, improve the quantity control for welded structures. The development of the system is goal in this study.

• Journal of Welding and Joining
• /
• 제28권5호
• /
• pp.69-74
• /
• 2010

Irradiation behavior of the reactor pressure vessel SA508 class 3 steel weld metals was examined by Charpy V Notch impact specimens. The specimens were exposed to a fluence of $2.8{\times}1019$ neutrons(n)/$cm^2$(E>1 MeV) at $288^{\circ}C$. The irradiation damage of weld metal was evaluated by comparison between unirradiated and irradiated specimens in terms of absorbed energy and lateral expansion. The specimens for neutron irradiation were welded by submerged arc welding process at a heat input of 3.2 kJ/mm which showed good toughness in terms of weld microstructure, absorbed energy and lateral expansion. The post-irradiation Charpy V notch 41J and 68J transition temperature elevation were $65^{\circ}C$ and $70^{\circ}C$, respectively. This elevation was accompanied by a 20% reduction in Charpy V notch upper shelf energy level. The lateral expansion at 0.9mm irradiated Charpy specimens showed temperature elevation of $65^{\circ}C$ and was greatly decreased due to radiation damage.

• Steel and Composite Structures
• /
• 제44권2호
• /
• pp.271-281
• /
• 2022

This study discusses challenges of running expandable profile liners (EPLs) to isolate trouble zones in directional section of a deep well, and summary the expandable profile liner technology (EPLT) field trial experience. Technically, the trial result reveals that it is feasible to apply the EPLT solving lost-circulation control problem and wellbore instability in the deep directional section. Propose schemes for optimizing the EPLT operation procedure to break through the existing bottleneck of EPLT in the deep directional section. Better-performing transition joints are developed to improve EPL string reliability in high borehole curvature section. High-performing and reliable expanders reduce the number of trips, offer excellent mechanical shaping efficiency, simplify the EPLT operation procedure. Application of the expansion and repair integrated tool could minimize the risk of insufficient expansion and increase the operational length of the EPL string. The new welding process and integrated automatic welding equipment improve the welding quality and EPL string structural integrity. These optimization schemes and recent new advancements in EPLT can bring significant economic benefits and promote the application of EPLT to meet future challenges.

• 대한조선학회논문집
• /
• 제37권2호
• /
• pp.127-136
• /
• 2000

선박 건조 시 발생하는 용접변형은 블록의 정도를 떨어뜨리고 교정작업으로 인한 생산성 저하의 요인이 되고 있다. 따라서 설계 단계에서 변형을 최소화 할 수 있는 작업기준을 마련한다면 생산성 증대는 물론 품질의 향상을 가져올 수 있을 것이다. 여기에는 먼저 블록의 조립과정에 따른 변형을 예측할 수 있는 정확하고 효율적인 방법이 마련되어야 한다. 본 논문에서는 고유변형도 이론과 유한요소 해석을 결합한 효율적인 변형예측 기법을 제안하였다. 고유변형도는 간이 열탄소성 해석 결과 최고온도 분포와 구속도에 의해 결정된다. 따라서 용접 열전도 해석과 구조물의 조립과정에 따른 구속도 계산을 수행하여 실제 구조물에 발생하는 고유변형도를 정확히 구하고자 하였다. 이를 이용하여 보강판의 변형 예측을 구현하였고 간단한 선체 블록에 적용할 수 있음을 확인하였다.