• 자원환경지질
• /
• 제29권2호
• /
• pp.183-192
• /
• 1996

Much computing time and large computer memory are needed to solve the wave equation in a large complex subsurface layer using finite difference method. The time and memory can be reduced by decreasing the number of grid per minimun wave length. However, decrease of grid may cause numerical dispersion and poor accuracy. In this study, we present 49 points weighted average method which save the computing time and memory and improve the accuracy. This method applies a new weighted average to the coordinate determined by transforming the coordinate of conventional 5 points finite difference stars to $0^{\circ}$ and $45^{\circ}$, 25 points finite differenc stars to $0^{\circ}$, $26.56^{\circ}$, $45^{\circ}$, $63.44^{\circ}$ and 49 finite difference stars to $0^{\circ}$, $18.43^{\circ}$, $33.69^{\circ}$, $45^{\circ}$, $56.30^{\circ}$, $71.56^{\circ}$. By this method, the grid points per minimum wave length can be reduced to 2.5, the computing time to $(2.5/13)^3$, and the required core memory to $(2.5/13)^4$ computing with the conventional method.

• 전자공학회논문지B
• /
• 제33B권9호
• /
• pp.117-123
• /
• 1996

In this paper, we present a new learning method for the fuzzy ARTMAP which is effective for the noisy input patterns. Conventional fuzzy ARTMAP employs only fuzzy AND operation between input vector and weight vector in learning both top-down and bottom-up weight vectors. This fuzzy AND operation causes excessive update of the weight vector in the noisy input environment. As a result, the number of spurious categories are increased and the recognition ratio is reduced. To solve these problems, we propose a new method in updating the weight vectors: the top-down weight vectors of the fuzzy ART system are updated using weighted average of the input vector and the weight vector itself, and the bottom-up weight vectors are updated using fuzzy AND operation between the updated top-down weitht vector and bottom-up weight vector itself. The weighted average prevents the excessive update of the weight vectors and the fuzzy AND operation renders the learning fast and stble. Simulation results show that the proposed method reduces the generation of spurious categories and increases the recognition ratio in the noisy input environment.

• 한국경영과학회지
• /
• 제39권1호
• /
• pp.1-12
• /
• 2014

This article proposes a variable sampling interval (VSI) $\bar{X}$ control chart using weighted standard deviation (WSD) method for skewed populations. The WSD method decomposes the standard deviation of a quality characteristic into upper and lower deviations and adjusts control limits and warning limits of a control chart in accordance with the direction and degree of skewness. A control chart constant is derived for estimating the standard deviation of skewed distributions with the mean of sample standard deviations. The proposed chart is compared with the conventional VSI $\bar{X}$ control chart under some skewed distributions. Simulation study shows that the proposed WSD VSI chart can control the in-control average time to signal (ATS) as an adequate level better than the conventional VSI chart, and the proposed chart can detect a decrease in the process mean of a quality characteristic following a positively skewed distribution more quickly than the standard VSI chart.

• 한국콘텐츠학회논문지
• /
• 제12권2호
• /
• pp.105-115
• /
• 2012

본 논문에서는 휴대폰 카메라를 통해 간판영상의 한글문자를 인식한 후 오인식 된 결과를 교정하는 방법으로 인식 후보를 음소단위 분할하고 연산 가중치를 적용한 weighted Disassemble Levenshtein Distance(wDLD)를 제안한다. 제안된 방법은 인식된 문자열을 음소 단위로 분할한 후 입력 형태의 거리값을 산출하여, 가장 유사한 상호명을 데이터베이스에서 검출 한다. 제안된 방법의 효율성을 검증하기 위해, 전국의 상호명 중 중복되는 상호명을 제거한 130만개의 상호명을 이용하여 데이터베이스 사전을 구축하였다. 또한 대표적인 문자열 비교 알고리즘인 Levenshtein Distance와 음소를 분할하여 적용한 Disassemble Levenshtein Distance 방법, 그리고 본 논문에서 제안한 인식 후보의 음소 단위 분할 방법과 연산 가중치를 적용한 weighted Disassemble Levenshtein Distance의 교정율을 비교 분석 하였다. 그 결과 제안된 weighted Disassemble Levenshtein Distance(wDLD)은 Levenshtein Distance와 Disassemble Levenshtein Distance방법에 비해 각각 평균 29.85%와 6%의 인식률의 향상을 보였다.

• 한국도로학회논문집
• /
• 제15권5호
• /
• pp.135-144
• /
• 2013

PURPOSES : The purpose of this paper is to develop a methodology to estimate level of service of arterial including Exclusive Median Bus Lanes. METHODS : On 6 Exclusive Median Bus Lanes routes in Seoul, bus travel time and number of bus-stop per km were investigated. Also whether or not passing lane exists at bus-stop was checked. Based on the data from sites, bus travel time was estimated according to length of segment, number of bus-stop per km and whether or not passing lane exists at bus-stop. RESULTS : A bus travel time table was developed according to length of segment, number of bus-stop per km and whether or not passing lane exists at bus-stop. After bus travel speed and passenger car travel speed is estimated based on each travel time table and length of segment, two speeds are combined with weighted average speed using traffic volume of each lane group. Then weighted average speed is a measure of effectiveness of arterial including Exclusive Median Bus Lanes. CONCLUSIONS : It can be concluded that the proposed methodology can estimate level of service of arterial including Exclusive Median Bus Lanes considering the operation characteristics of Exclusive Median Bus Lanes.

• 한국통신학회논문지
• /
• 제35권5C호
• /
• pp.472-478
• /
• 2010

UWB 표준인 IEEE 802.15.3a 채널의 무선 통신 시스템 환경에서 채널에 적합하고 추정 정확도가 우수한 신호 도착 방향(AOA) 매개변수 추정 기반의 실내 무선 위치인식 알고리즘을 위한 평균가중 AOA 추정기법을 제안한다. AOA 매개 변수 추정을 위한 IEEE 802.15.3a 기반의 초광대역 신호 모형을 설정하고, 종래 추정 기법보다 추정 정확도가 우수한 평균가중 기반의 다중신호 분류 기법들을 제안한다. 컴퓨터 모의실험을 통해, IEEE 802.15.3a 채널이 포함한 실내 무선 위치인식 시스템 환경을 구축하고, 제안한 AOA 추정 방식을 통해 종래 방식 보다 우수한 추정 결과를 보인다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.383-386
• /
• 1993

In this paper, we propose a sensory data combination method by a fuzzy number approach for multisensor data fusion. Generally, the weighting of one sensory data with respect to another is derived from measures of the relative reliabilities of the two sensory modules. But the relative weight of two sensory data can be approximately determined through human experiences or insufficient experimental data without difficulty. We represent these relative weight using appropriate fuzzy numbers as well as sensory data itself. Using the relative weight, which is subjective valuation, and a fuzzy-numbered sensor data, the fuzzy weighted average method is used for a representative sensory data. The manipulation and calculation of fuzzy numbers can be carried out using the Zadeh's extension principle which can be approximately implemented by the $\alpha$-cut representation of fuzzy numbers and interval analysis.

• 품질경영학회지
• /
• 제19권2호
• /
• pp.172-180
• /
• 1991

The null hypothesis being tested by $the{\bar{X}}$ control chart is that the process is in control at a quality level ${\mu}o$. An ${\bar{X}}control$ chart is a tool for detecting process average changes due to assingnable causes. The major weakness of $the{\bar{X}}$ control chart is that it is relatively insensitive to small changes in the population mean. This paper presents one way to remedy this weakness is to allow each plotted value to depend not only on the most recent subgroup average but on some of the other subgroup averages as well. Two approaches for doing this are based on (1) moving averages and (2) exponentially weighted moving averages of forecasting method.

• 대한토목학회논문집
• /
• 제34권4호
• /
• pp.1171-1180
• /
• 2014

유역의 유효우량을 산정할 경우 NRCS-CN 방법을 이용하는 것이 보통이다. NRCN-CN 방법에서 유역의 유출특성을 나타내는 중요한 인자인 유출곡선지수(CN)은 미국 유역을 대상으로 개발되어졌기 때문에, 미국 이외의 국가에서 적용될 경우 지역의 강우-유출 특성을 반영하지 못하는 한계점을 가지고 있다. 이에 많은 연구에서 유역의 CN값을 보정하는 방법을 제시하고 있다. 본 연구에서는 우리나라에 적절한 유효우량 산정방법을 제시하기 위하여 유역의 CN값을 가중평균하는 방법과 유역의 경사도를 고려하여 CN값을 보정하는 방법을 적용하여 유효우량을 산정하고 이를 관측 유효우량과 비교 분석을 수행하였다. 본 연구 결과, 경사도를 고려하여 CN값을 보정할 경우 유효우량이 전반적으로 크게 산정되었으며, 유효우량의 지속시간 또한 길어지는 것으로 나타났다. 유효우량의 산정방법에 따른 통계학적 오차 분석을 수행한 결과, 경사도로 보정한 CN값을 적용한 가중평균 유효우량 산정방법이 관측 직접유출량과 높은 정확성을 가지는 것으로 나타났다. 또한, 관측 자료를 이용하여 추정한 초기손실량과 GIS 자료를 이용하여 추정한 최대잠재보유수량과의 관계를 분석한 결과, NRCS-CN 방법에서 적용되고 있는 선형가정은 실제 강우-유출 관계와 큰 차이를 가지고 있는 것으로 나타났다.

• 디지털융복합연구
• /
• 제3권1호
• /
• pp.115-148
• /
• 2005

This study is intended to suggest a more reasonable and practical method of estimating discount & capitalization rate for valuation of closely-held culture content business, that is, to modify the Buildup Summation Model(which is recommended for the closely-held business by the NACVA) by adopting the weighted ratings in the CT Project Investment Evaluation of the Korea Culture Contents Association to risk factors of the Buildup Summation Model. This method is ease to apply for closely-held culture content business and has advantages in applying the weighted rates based on the characteristics of respective culture contents. And it can make up for the Weighted Average Cost of Capital (WACC) which shows generally low discount rates.