• 대한족부족관절학회지
• /
• 제19권4호
• /
• pp.188-192
• /
• 2015

Purpose: The purpose of this study is to provide Korean data on heel pad thickness according to age, gender, underlying disease, occupation, and body mass index (BMI). Materials and Methods: A retrospective study was conducted on 670 patients who underwent foot lateral plain radiography and magnetic resonance imaging (MRI) between January 2010 and July 2014. Through measurements of heel pad thickness, the usefulness and accuracy of foot lateral plain radiography was evaluated, and the mean Korean heel pad thickness in the weight-bearing and non-weight-bearing conditions was also evaluated according to age, gender, underlying disease, occupation, and BMI. Results: The 670 subjects with a mean age of 44 years (range, 12 to 84 years) consisted of 420 males and 250 females. The difference in heel pad thickness between non-weight-bearing foot lateral plain radiography and MRI was 0.69 mm. The heel pad thickness did not show a significant difference with age (p=0.08) and the presence of diabetes (p=0.09). With the increase in the Tegner score, the thickness of the heel pad increased (p=0.035), and subjects with a higher BMI had a thicker heel pad (p=0.03). The compressibility of the heel pad thickness showed no correlation with gender, diabetes, and Tegner score. Compressibility also increased with the increase in age and body weight. Conclusion: The mean Korean heel pad thickness measured through non-weight-bearing foot lateral plain radiography was 18.79 mm. The heel pad thickness increased with increasing BMI; however, age and diabetes did not show significant correlation. The compressibility of heel pad increased with the increase in age.

• 한국전문물리치료학회지
• /
• 제22권1호
• /
• pp.30-36
• /
• 2015

The purpose of this study was to examine the relationships between the ankle dorsiflexion passive range of motion (DF PROM) under a non-weight bearing condition and the normalized reach distance in three directions of the Y-Balance Test (YBT). Sixty-one healthy adults (32 males and 29 females, age: $23.0{\pm}3.0$ years, height: $169.3{\pm}8.9cm$, weight: $61.9{\pm}5.4kg$) participated in this study. The ankle DF PROM was measured using a goniometer. To assess dynamic balance, all subjects performed three trials to determine the maximum lower extremity reach in the anterior, posteromedial, and posterolateral directions of the YBT. The relationship between the ankle DF PROM and both the normalized reach distance in each direction and the composite score of the YBT were analyzed using the Pearson correlation. Only the normalized reach distance in the anterior direction of the YBT was significantly related to the ankle DF PROM measured under a non-weight bearing condition (r=.50, p<.001). Neither the normalized reach distances in the posterior directions nor the composite score of the YBT were significantly correlated with the ankle DF PROM measured under a non-weight bearing condition. These findings suggest that ankle DF PROM does not affect the overall dynamic balance of the lower extremity, with only the anterior dynamic balance affected among the three directions.

• 한국전문물리치료학회지
• /
• 제5권3호
• /
• pp.42-47
• /
• 1998

Patients with hemiplegia usually show different body weight distribution as compared with normal subjects. Asymmetrical posture during static stance has been identified as a common problem in patients with hemiplegia. The purpose of this study was to identify the effects of vision and visual feedback on body weight distribution while standing under three conditions: eyes-closed, eyes-open and visual feedback condition. Fourteen patients with hemiplegia participated in the study. Their body weight distribution during standing for 20 seconds was measured by Limloader. The data were analysed by repeated measure of one-way ANOVA. The weight bearing on the paretic limb in the eyes-open condition was significantly higher than that of the eyes-closed condition. The weight bearing on the parietic limb in the visual feedback condition was significantly higher than that of the eyes-open condition. These results suggest that patients with hemiplegia can improve their symmetrical stance ability using visual feedback.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.181-182
• /
• 2015

The use of non-bearing light weight wall has increased recently due to the increase of high-rise buildings and supply of long-life housing. Light weight wall has advantages such as reducing the self-weight of the building, convenience in installation, and shortening construction period, however, must have a sufficient strength to external force. This study standardized the impact resistance test method for light weight walls by using the actual impact load obtained through load analysis test in previous studies. The impact resistance test method was divided into the test method that uses soft body and the one that uses hard body. The size of specimen was set up as height 2.4m and width 3.0m. The size and shape of the body followed those used in BS 5234-2 and so on for the compatibility with the test method used overseas. The judgment criteria for impact resistance based on test results were not defined uniformly as the assessment of functional damage can vary depending on the type of material, structural method, purpose of wall, and so on even when the same impact load was applied.

• Safety and Health at Work
• /
• 제10권3호
• /
• pp.314-320
• /
• 2019

Background: Sitting posture may be related to risk factors, including inadequate weight-bearing support, particularly when maintained for long periods. Considering that body weight is loaded in a closed support system composed of the seat, backrest, floor and working surface, the aims of the present study were to describe the development of an ergonomic sitting workstation to continuously record weight-bearing at the seat, chair, backrest, work surface, and floor and to test its measurement properties: reproducibility, criterion-related validity, and sensitivity. Methods: Rigid bodies (1 to 30 kg) and participant weights were recorded to evaluate the workstation measurement properties. Results: Rigid body tests showed variation values less than 0.050 kg on reproducibility test and errors below 5% of measured value on criterion validity tests. Participant tests showed no statistically significant differences between repeated measures ($p{\geq}0.40$), errors were less than 2% of participant weights an sensitivity presented statistically significant changes (p = 0.007). Conclusion: The sitting workstation proposed showed to be reliable, valid and sensitive for use in future ergonomic studies to evaluate the sitting posture.

• Architectural research
• /
• 제7권1호
• /
• pp.49-54
• /
• 2005

Conventional studies have focused on the reduction in the water-cement ratio, the use of various admixtures, etc., to ensure the durability of reinforced concrete structures against such deterioration factors as carbonation and chloride attack. However, improvement in the concrete quality alone is not considered sufficient or realistic for meeting the recent demand for a service life of over 100 years. This study intends to improve the durability of reinforced concrete structures by improvement in the reinforcing steel, which has remained untouched due to cost problems, through subtle adjustment of the steel components to keep the cost low. As a fundamental study on the performance of Cr-bearing rebars in steel reinforced concrete structures exposed to corrosive environments, The test specimens were made by installing 8 types of rebars in concretes with a chloride ion content of 0.3, 0.6, 1.2, 2.4 and $24kg/m^3$. Corrosion accelerated curing were then conducted with them. The corrosion resistance of Cr-bearing rebars was examined by measuring crack widths, half-cell potential, corrosion area and weight loss after 155 cycles of corrosion-accelerating curing. The results of the study showed that the corrosion resistance increased as the Cr content increased regardless of the content of chloride ions, and that the Cr-bearing rebars with a Cr content of 5% and 9% showed high corrosion resistance in concretes with a chloride ion content of 1.2 and $2.4kg/m^3$, respectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1429-1430
• /
• 2013

• 국제물리치료학회지
• /
• 제1권2호
• /
• pp.185-191
• /
• 2010

Background: This study investigated effective posture for gluteus medius rehabilitation training and effects of isometric muscle activity by electrophysiology through EMG while performing dynamic isotonic behavior of weight placed differently on upper limbs. Method: 16 healthy male subjects 20 to 29 years of age volunteered for the study. Lateral stabilizer right gluteus medius activity was assessed using EMG while the right lower extremity maintains single limb support, and the left upper extremity elevation movement maintains 5 seconds without load, 1RM to 1 repetition, 5RM to 5 times, 10RM to 10 times, 5RM and 10RM maintain 5sec. Results: Comparison of the mean value of EMG data showed a statistically more significant difference in upper extremity elevation movement on opposite upper extremity added weight than one that was not added on a single limb weight bearing posture(p>.05). Weight supported side gluteus medius activity for 1RM, 5RM, 10RM weight difference and movement repetition did not differ(p>.05). Comparison in maximum value showed statistically significant differences in not adding weight on upper limb elevation exercise and 1RM, 5RM, 10RM repeated behavior. Elevation behavior and repetition appeared over 70% of MVIC. Conclusion: Unilateral weight bearing stance added weight in the opposite upper limb elevation movement was an indirect exercise to effectively stimulate gluteus medius activity. Applying various added weight will have effective exercise on the early stages of rehabilitation because activity gluteus medius did not differ through added weight.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.349-353
• /
• 2001

An air foil bearing is developed for the high speed generator. The bearing is type of multi-leaf and is stable on 60,000RPM. The vibration level is 12um(p-p) and the highest temperature level is below 100$^{\circ}C$. The dynamic parameter of air foil bearing is acquired by experimental method using exciter. The air foil bearing is also good condition at test of real generator and load condition. The condition of foil is very good after 3,000cycle start-stop test. Therefore the air foil bearing is ideal for high speed, light weight and modem turbo-machinery.

• 한국전문물리치료학회지
• /
• 제2권2호
• /
• pp.9-23
• /
• 1995

The objective of this study was to identify the effects of weight-transfer training on the weight bearing distribution and gait patterns of hemiplegic patients through visual and auditory feedback using a limb load monitor. The subjects of this study were 18 hemiplegic patients who had been hospitalized or were visited out-patient department of the Rehabilitation Hospital, College of Medicine, Yonsei University, from January 5, 1995 through March 15, 1995. Pre-and post-training changes in gait patterns were measured using ink foot prints as well as by recording weight bearing distribution using a limb load monitor. The data were analyzed by the repeated measure one-way ANOVA and paired t-test. The finding were as follows: 1. Prior to the training, 18 subjects bore more weight on the sound leg(61.6 %) than on the affected leg(38.4 %). 2. Posterior to the training, the average percentage of weight bearing on the affected leg increased significantly from 38.4 % prior to training; to 46.0 % immediately after training; 45.7 % after a 30 second delay; and 45.3 % after a 60 second 3. The difference in gait patterns between pre- and post- training was statistically significant, with an increase in gait velocity to 3.65 cm/sec post-training; an increase in stride length to 5.37 cm on the affected side; 4.77 cm on the sound side; and a narrowing of the base of support to 1.19 cm. In conclusion, hemiplegic weight-transfer training using visual and auditory feedback with a limb load monitor was found to be enhancing symmetrical standing posture, and simultaneously improve gait patterns.