• Computers and Concrete
• /
• 제29권 6호
• /
• pp.393-405
• /
• 2022

Lightweight concrete is a superior material due to its light weight and high strength. There however remain significant lacunae in engineering knowledge with regards to shear failure of lightweight fiber reinforced concrete beams. The main aim of the present study is to investigate the optimum usage of steel fibers in lightweight fiber reinforced concrete (LWFRC). Multi-scale finite element model calibrated with experimental results is developed to study the effect of steel fibers on the mechanical properties of LWFRC beams. To decrease the amount of steel fibers, it is preferred to reinforce only the middle section of the LWFRC beams, where the flexural stresses are higher. For numerical simulation, a multi-scale finite element model was developed. The cement matrix was modeled as homogeneous and uniform material and both steel fibers and lightweight coarse aggregates were randomly distributed within the matrix. Considering more realistic assumptions, the bonding between fibers and cement matrix was considered with the Cohesive Zone Model (CZM) and its parameters were determined using the model update method. Furthermore, conformity of Load-Crack Mouth Opening Displacement (CMOD) curves obtained from numerical modeling and experimental test results of notched beams under center-point loading tests were investigated. Validating the finite element model results with experimental tests, the effects of fibers' volume fraction, and the length of the reinforced middle section, on flexural and residual strengths of LWFRC, were studied. Results indicate that using steel fibers in a specified length of the concrete beam with high flexural stresses, and considerable savings can be achieved in using steel fibers. Reducing the length of the reinforced middle section from 50 to 30 cm in specimens containing 10 kg/m3 of steel fibers, resulting in a considerable decrease of the used steel fibers by four times, whereas only a 7% reduction in bearing capacity was observed. Therefore, determining an appropriate length of the reinforced middle section is an essential parameter in reducing fibers, usage leading to more affordable construction costs.

• 패션비즈니스
• /
• 제26권4호
• /
• pp.112-122
• /
• 2022

The purpose of this study is to investigate the effect of using socks combined with EMS on ankle pain reduction and ankle function improvement in home training participants. In this study, the conductive fabric was combined using socks that can properly compress the ankle. First, VAS was measured during EMS training after fatigue was induced and compared with fatigue during rest. It was confirmed that the level of VAS after EMS training was lower than after rest and fatigue. It was also confirmed that EMS training, which combines EMS with socks, was effective in reducing pain. The experimental action is a measurement action of WBLT and lying posture, and the situation before and after EMS training was compared by performing 30 minutes on the treadmill to cause delayed muscle pain during exercise. As a result of this study, it was found that pain reduction and ROM function were improved when electrical stimulation was performed using EMS socks. It was also confirmed that the application of electrical stimulation to EMS socks effected on ankle fatigue and function improvement. From the study results, it is expected that wearing socks equipped with EMS significantly reduces ankle injuries and improves functional recovery for home training participants.

• Journal of Acupuncture Research
• /
• 제39권2호
• /
• pp.134-138
• /
• 2022

Distal femur osteotomy (DFO) is a controlled surgical break of the femur performed to allow realignment of the limb. Redistribution of the load aims to correct the abnormal mechanical weight-bearing axes in patients with abnormal alignment of the lower extremities, and degenerative changes in the knee joint. This report describes a complex Korean medicine treatment for a patient complaining of knee pain and stiffness following a DFO. Post-operative care for the patient lasted 78 days with treatment including pharmacopuncture, acupuncture, herbal medicine, cupping therapy, and physiotherapy. The effectiveness of the treatments was evaluated using the numerical rating scale, range of motion of the knee, and by physical examination. After treatment, these evaluation indicators improved, suggesting that the complex Korean medicine treatment received by the patient was an appropriate treatment for knee pain and stiffness following a DFO.

• Korean Journal of Acupuncture
• /
• 제39권4호
• /
• pp.132-141
• /
• 2022

Objectives : Some acupoints are commonly utilized to treat a variety of diseases. The acupoints appear to have a wide range of effects caused by several mechanisms. The purpose of this study is to investigate into the potential role of microRNAs (miRNAs) in the multipotent effects of individual acupoint stimulation. Methods : We examined the miRNA expressions in the dorsal root ganglia (DRG) of neuropathic or inflammatory pain rats following ST36 and GB34 electroacupuncture (EA) stimulation. Neuropathic pain was induced by L5 spinal nerve ligation. Inflammatory pain was induced by knee joint injection of Complete Freund's adjuvant (CFA). EA was given under gaseous anesthesia with the same parameters (1mA, 2Hz, 30 min) in 5 consecutive days. Pain behaviors and miRNA expressions were analyzed. Results : In rats with neuropathic and inflammatory pain, EA treatments significantly enhanced the paw withdrawal threshold and weight-bearing force. After nerve injury, 36 miRNAs were upregulated in the DRG of neuropathic rats, while EA downregulated 10 of them. Furthermore, 14 miRNAs were downregulated following nerve damage, while one was increased by EA. 15 miRNAs were increased in the DRG of inflammatory rats following CFA injection, while 5 were downregulated by EA. Furthermore, 17 miRNAs were downregulated following CFA injection, while 7 were increased by EA. The miRNAs rno-miR-335, rno-miR-381-5p, rno-miR-1306-3p, and rno-miR-1839-3p were regulated by EA in both models. Conclusions : In two pain models, EA applied to ST36 and GB34 regulated miRNA expression differently. There appeared to be both acupoint-specific and non-specific miRNAs, and miRNA regulation of differential protein expression may modulate a variety of EA mechanisms.

• 한국지반공학회논문집
• /
• 제24권1호
• /
• pp.119-130
• /
• 2008

얕은기초 설계시 이용되는 지반의 물리적 공학적 설계변수들은 고유변동성(inherent variability) 및 측정 오차(measurement error) 등과 같은 여러 가지 요인으로 인하여 불확실성이 필연적으로 내포되어 있다. 본 논문에서는 얕은기초 설계시 기존의 결정론적 방법에서 고려하지 못하는 지반 불확실성 등을 포함한 설계 파라미터의 분산을 고려할 수 있는 확률론적 방법의 신뢰성 설계 사례를 제시하였다. 극한지지력 산정시 확률변수(random variable)인 단위중량, 점착력 및 내부마찰각 그리고 침하량 산정시 탄성계수에 대하여 국내 지반에 대한 적정 확률분포 형태 및 통계적 특성치를 결정하였다. 각 확률변수별로 채택된 분포를 적용하여 지지력과 침하량에 관한 신뢰지수와 파괴확률을 결정하였으며, 목표 신뢰지수 또는 확률에 대한 기초폭을 결정하였다. 얕은기초의 신뢰성 설계에 있어서 정규분포의 일괄적 적용보다는 각 확률변수에 해당하는 적합한 분포형태를 적용, 분석하는 것이 바람직한 것으로 나타났다.

• Advances in nano research
• /
• 제12권3호
• /
• pp.301-317
• /
• 2022

Many studies have shown that Mg-Nd-Zn-Zr (abbreviated as JDBM) alloy has good biocompatibility and biodegradability as well as promotion of cell adhesion, proliferation and differentiation, and Wnt/β-catenin signaling pathway may play a unique role in joint tissue by controlling the function of chondrocytes, osteoblasts and synoviocytes. However, it is not clear whether the JDBM alloy induces osteochondral repair through Wnt/β-catenin signaling pathway. This study aims to verify that JDBM alloy can repair osteochondral defects in rats, which is realized by Wnt/β-catenin signaling pathway. In this study, the osteochondral defect model of the right femoral condyle non-weight-bearing area in rats was established and randomly divided into three groups: Control group, JDBM alloy implantation group and JDBM alloy implantation combined with signaling pathway inhibitor drug ICRT3 injection. It was found that after JDBM alloy implantation, the bone volume fraction (BVF) became larger, the bone trabeculae were increased, the relative expression of osteogenesis gene Runx2, Bmp2, Opn, Ocn and chondrogenesis gene Collagen II, Aggrecan were increased, and the tissue repair was obvious by HE and Masson staining, which could be inhibited by ICRT3.

• 대한융합한의학회지
• /
• 제1권1호
• /
• pp.35-44
• /
• 2021

Objectives: The purpose of this study is to investigate the effect of ultrasound therapy on left knee pain and instability diagnosed with Baker's cyst in a 25-year-old male patient. Methods: Patient was treated with Radio frequency ablation treatment on left knee from Naeseulan (EX-LE4) to Wijoong (BL40). The effect of radio frequency ablation was assessed by Visual Analog Scale (VAS), Western Ontario and McMaster Universities (WOMAC) and Euro Qol-5 Dimension Index (EQ-5D Index). The treatment was executed one time a day everyday form May 28th to June 1st of 2020. Patient was observed from May 26th to June 1st. Results: After five sessions of radio frequency ablation, VAS of left posterior knee pain was improved while no improvement was discovered at left medial knee. In Korean WOMAC scale, only subscale of weight bearing and walking around plain were improved. EQ-5D did not show any improvement. Conclusion: The results suggest that radio frequency ablation treatment can be a valuable option in treating knee pain and daily living function. Further study seems to be needed based on long-term intervention.

• Steel and Composite Structures
• /
• 제45권1호
• /
• pp.83-100
• /
• 2022

Timber is one of the few natural, renewable building materials and glulam is a type of engineering wood product. In the present work, timber-based braces are applied for retrofitting midrise Special Moment Resisting Frame (SMRF) using two types of timber base braces (Timber base glulam, and hybrid Timber-Steel-BRB) as alternatives for retrofitting by traditional steel bracings. The improving effects of adding the bracings to the SMRF on seismic characteristics of the frame are evaluated using load-bearing capacity, energy dissipation, and story drifts of the frame. For evaluating the retrofitting effects on the seismic performance of SMRF, a five-story SMRF is considered unretofitted and retrofitted with steel-hollow structural section (HSS) brace, Glued Laminated Timber (Glulam) brace, and hybrid Timber-Steel BRB. Using OpenSees structural analyzer, the performance are investigated under pushover, cyclic, and incremental loading. Results showed that steel-HSS, timber base Glulam, and hybrid timber-steel BRB braces have more significant roles in energy dissipation, increasing stiffness, changing capacity curves, reducing inter-story drifts, and reducing the weight of the frames, compared by steel bracing. Results showed that Hybrid BRB counteract the negative post-yield stiffness, so their use is more beneficial on buildings where P-Delta effects are more critical. It is found that the repair costs of the buildings with hybrid BRB will be less due to lower residual drifts. As a result, timber steel-BRB has the best energy dissipation and seismic performance due to symmetrical and stable hysteresis curves of buckling restrained braces that can experience the same capacities in tension and compression.

• 한국컴퓨터정보학회논문지
• /
• 제28권11호
• /
• pp.161-168
• /
• 2023

본 연구의 목적은 비 체중지지 자세 상태에서 발목관절 발등굽힘 관절가동범위에 따라 동적 균형 능력을 평가하는 Y-Balance Test와의 관계를 규명하고자 하였다. 본 연구에는 10년 이상의 축구경력을 가진 K3리그에 정기적으로 참여하는 남자축구선수 27명이 참여하였다. 발목관절의 발등굽힘과 동적균형 능력과의 관계를 검증하기 위해 The Pearson Rank Correlation Coefficient를 사용하였다. 본 연구의 결과 HADR군에서 PLRD(P<.05)와 CS(P<.01)에서 유의한 차이가 나타났으며, 발목관절 발등굽힘의 관절가동범위와 PMRD, PLRD 및 CS에서만 중증도의 유의한 상관관계가 나타났다. 따라서 발목관절 발등굽힘의 감소는 균형 능력 감소와 관련이 있으며, 축구선수의 손상을 예방하기 위해서는 정기적인 발목관절 관절가동범위의 평가뿐만 아니라 무릎과 엉덩관절의 근력 및 고유수용감각을 향상시키기 위한 트레이닝이 필요할 것으로 생각된다.

• 대한물리의학회지
• /
• 제19권1호
• /
• pp.95-105
• /
• 2024

PURPOSE: This study aimed to utilize the International Classification of Functioning, Disability, and Health (ICF) tool to identify a problem list and explore intervention effects using proprioceptive neuromuscular facilitation (PNF) for improving the crosswalk performance of patients who have undergone a bilateral hip arthroplasty. METHODS: The subject of this study was a 43-year-old male who had undergone a bilateral hip arthroplasty. To address the subject's functional status, a clinical decision-making process was carried out in the order of examination, evaluation, diagnosis, prognosis, intervention, and outcome. Patient information during the examination was collected using the ICF core set. The evaluation involved listing the items of each problem using the ICF assessment sheet and identifying the interaction between activity limitations and the impairment level. The diagnosis explicitly described the causal relationships derived from the evaluation using ICF terminology. The prognosis presented activity goals, body function, and structured goals in terms of the activity and participation levels that needed to be achieved for an individual's functional status. The intervention approached problems through the four components of the PNF philosophy, namely basic principles and procedures, techniques, and patterns, in an indirect-direct-task sequence. Results were compared before and after the intervention using the ICF evaluation display. RESULTS: The results of the study showed that the primary activity limitation, which was the walking time across the crosswalk, showed improvement, and the trunk's counter rotation and the weight-bearing capacity of both the lower limbs, which were impairment level indicators, were enhanced. CONCLUSION: This study suggests that PNF intervention strategies will serve as a positive approach for improving crosswalk walking in patients with bilateral hip arthroplasty.