• Particle and aerosol research
• /
• 제14권4호
• /
• pp.97-105
• /
• 2018

Recently, people's interest in particulate matter (PM) has been increasing, due to its hazardous health effects. The purpose of this study was to investigate the concentrations and as well as the inhaled weight of PM, correlated with person's heart rate in subway, bus, vehicle and bicycle in the major public transportation (Sadang - Jamsil and Nowon - Dongdaemun) in Seoul. The concentration of $PM_{10}$ and $PM_{2.5}$ were measured from each of transportation means and calculated the average concentrations which were 87.2 and $57.8{\mu}g/m^3$ for subway, 62.8 and $42.5{\mu}g/m^3$ for vehicle, 61.5 and $36.8{\mu}g/m^3$ for bus and 53.0 and $29.4{\mu}g/m^3$ for bicycle in $PM_{10}$ and $PM_{2.5}$ respectively. Inhalation dose for $PM_{10}$ and $PM_{2.5}$ were estimated at 248.1 and $139.4{\mu}g$ for bicycle, 56.7 and $39.3{\mu}g$ for vehicle, 49.4 and $29.9{\mu}g$ for bus and 44.3 and $29.1{\mu}g$ for subway, respectively. Even though subway had the highest concentration, the highest inhalation dose was the bicycle. It was due to the long travel time-exposure and breathing rate which leads to maximum of $PM_{10}$ 5.6 and $PM_{2.5}$ with 4.8 times inhalation dose comparing with other modes of transportation. With regards to future studies, the amount of inhalation in each transportation means should be considered in risk assessments of PM.

• Membrane Journal
• /
• 제29권3호
• /
• pp.173-182
• /
• 2019

Much research has been made for finding new and eco-friendly alternative sources of energy to solve the problems related with the pollution caused by emissions of greenhouse gases such as carbon dioxide as the use of fossil fuels increases worldwide. Among them, fuel cells draws particular interests as an eco-friendly energy generator because only water is obtained as a by-product. Anion exchange membrane-based alkaline fuel cell (AEMFC) that uses anion exchange membrane as an electrolyte is of increased interest recently because of its advantages in using low-cost metal catalyst unlike the PEMFC (potton exchange membrane fuel cell) due to the high-catalyst activity in alkaline conditions. The main properties required as an anion exchange membrane are high hydroxide conductivity and chemical stability at high pH. Recently we reported a chemically crosslinked poly(2-dimethyl-1,4-phenylene oxide) (PPO) by reacting PPO with N,N,N',N'-tetramethyl-1,6-hexanediamine as novel anion exchange membranes. In the current work, we further developed the same crosslinked polymer but having enhanced physicochemical properties, including higher conductivity, increased mechanical and dimensional stabilities by using the PPO with a higher molecular weight and also by increasing the crosslinking density. The obtained polymer membrane also showed a good cell performance.

• Journal of Cadastre & Land InformatiX
• /
• 제49권1호
• /
• pp.85-101
• /
• 2019

Recently, thank to the popularization of light-weight drone through the significant developments in computer technologies as well as the advanced automated procedures in photogrammetry, Unmanned Aircraft Systems have led to a growing interest in industry as a whole. Documentation, maintenance, and restoration projects of large scaled cultural property would required accurate 3D phenomenon modeling and efficient visual inspection methods. The object of this study verify on the accuracies achieved of 3D phenomenon reconstruction as well as on the validity of the preservation, maintenance and restoration of large scaled cultural property by UAS photogrammetry. The test object is cltural heritage(treasure 1324) that is the rock-carved standing Bodhisattva in Soraesan Mountain, Siheung, documented in Goryeo Period(918-1392). This standing Bodhisattva has of particular interests since it's size is largest stone Buddha carved in a rock wall and is wearing a lotus shaped crown that is decorated with arabesque patterns. The positioning accuracy of UAS photogrammetry were compared with non-target total station survey results on the check points after creating 3D phenomenal models in real world coordinates system from photos, and also the quantified informations documented by Culture Heritage Administration were compared with UAS on the bodhisattva image of thin lines. Especially, tests the validity of UAS photogrammetry as a alternative method of visual inspection methods. In particular, we examined the effectiveness of the two techniques as well as the relative fluctuation of rock surface for about 2 years through superposition analysis of 3D points cloud models produced by both UAS image analysis and ground laser scanning techniques. Comparison studies and experimental results prove the accuracy and efficient of UAS photogrammetry in 3D phenomenon modeling, maintenance and restoration for various large-sized Cultural Heritage.

• Journal of the Korean Solar Energy Society
• /
• 제39권5호
• /
• pp.1-10
• /
• 2019

Recently, the installation capacity of PV (photovoltaic) systems has been increasing not only field installation but also floating PV, farm land, BIPV/BAPV. For this reason, the new design and materials of PV module are needed. In particular, in order to apply a PV system to a building, lightweight of the PV module is essential. PV modules made of generally used texturing glass are excellent in output and reliability, but there is a limit to the weight that can be reduced. For the lightweight of the PV module, it necessary to use a film instead of a glass. However, the application of film rather than a glass may cause various problems such as decrease in photocurrent by decrease in transmittance and a increase of CTM (cell to module) loss, a degradation of the reliability, and so on. In this paper, PV modules using Ultra barrier film, which is recently a lot of interest as a substitute for a glass, its characteristic analysis and reliability test were conducted. The transmittance and UV characteristics of each material were verified, and the output of the fabricated 1 cell PV module was measured. In addition, 24 cell PV modules were fabricated at the lab-scale and its reliability tests were conducted. As a result of the experiment, the reliability characteristics of the ultra barrier film PV module were excellent, and it was confirmed that it could be used as the front material of the PV module instead of glass

• Korean Journal of Medicinal Crop Science
• /
• 제27권2호
• /
• pp.126-135
• /
• 2019

Background: The ginseng ginsenosides, which have various physiological activities, are known to be more abundant in the leaves than in the roots, and the consumers' interest in ginseng sprout as a functional vegetable has been increasing. Methods and Results: The aim of this study was to investigate the effects of growth period on growth properties, active ingredients and rheology of ginseng sprouts cultivated in a non-heated greenhouse equipped with a shade net for 60 days, starting from the end of May to the middle of July. The chlorophyll content of the leaves decreased, but their length and width increased with increasing cultivation days. In particular, growth increased significantly until 40 days, but only slightly after 50 days. The stem length did not increase greatly from the 20 th to the 30 th day of cultivation, but increased significantly from the 30 th to the 40 th day, and then further increased gradually. The weight of the leaves, stems, and roots increased slightly, but not change significantly. After 40 days of cultivation, the total ginsenoside content increased by 1.07 times in the leaves and decreased by 0.80 times in the roots with increasing cultivation days. The leaf contents of ginsenosides $Rg_1$, Re, $Rb_1$, Rc, $F_3$ and $F_4$ increased with increasing cultivation days. The rheological properties of ginseng sprout showed the greatest influence on stem hardening with increasing cultivation days. Conclusions: Therefore, based on the growth characteristics, active ingredients and physical properties, 40 days after sowing was considered to be an appropriate harvesting time for ginseng sprouts.

• Journal of Life Science
• /
• 제30권12호
• /
• pp.1128-1139
• /
• 2020

Over recent years, it has become evident that food and agricultural products are easily contaminated by fungi of Aspergillus, Fusarium, and Penicillium due to rapid climate change, which is not only a global food quality concern but also a serious health concern. Owing to consumers' interest in health, resistance to preservatives such as propionic acid and sorbic acid (which have been used in the past) is increasing, so it is necessary to develop a substitute from natural materials. In this review, the role of lactic acid bacteria as a biological method for controlling the growth and toxin production of fungi was examined. According to recent studies, lactic acid bacteria effectively inhibit the growth of fungi through various metabolites such as organic acids with low molecular weight, reuterin, proteinaceous compounds, hydroxy fatty acids, and phenol compounds. Lactic acid bacteria effectively reduced mycotoxin production by fungi via adsorption of mycotoxin with lactic acid bacteria cell surface components, degradation of fungal mycotoxin, and inhibition of mycotoxin production. Lactic acid bacteria could be regarded as a potential anti-fungal and anti-mycotoxigenic material in the prevention of fungal contamination of food and agricultural products because lactic acid bacteria produce various kinds of potent metabolic compounds with anti-fungal activities.

• Animal Bioscience
• /
• 제34권3_spc호
• /
• pp.417-426
• /
• 2021

Objective: Effects of inulin supplementation in diet of Haidong chicks under hypoxic conditions on production performance, intestinal morphologic change, microflora contents and the incidence of ascites were studied. Methods: Commercial male chicks (360) were randomly divided into 6 groups and were fed diets supplemented with 0, 0.05, 0.075, 0.1, 0.125, and 0.15 g/kg of inulin, respectively. Results: The body weight gain and feed intake were improved in chicks fed the diets supplemented with 0.1 and 0.125 g/kg of inulin, from d 1 to d 42 (p<0.05); moreover, blood parameters were positively affected when inulin was included in the diets and the thickness of the intestinal wall and muscle tissue in duodenum, jejunum, and ileum tended to increase (p<0.05), and the villi height and crypt depth in duodenum, jejunum, and ileum (p<0.05). Regarding the number of goblet cells in duodenum, jejunum and ileum tended to increase when chicks were fed the diets supplemented with 0.075, 0.1, 0.125, and 0.15 g/kg (p<0.05) of inulin. When chicks were fed diets supplemented with 0.75 or 0.1 g/kg of inulin, a significant reduction of Escherichia coli counts in the cecum was observed; for a contrary, a significant increment of Bifidobacterium and Lactobacillus was observed in cecum and ileum. Finally, supplementing the feed with inulin determined an overall reduction of ascites incidences in comparison to the control group. Conclusion: Thus, the results observed in the present study clearly suggest that the diet supplementation with a quantity of inulin ranging between 0.1 and 0.125 g/kg, can improve growth performances, intestinal morphology, internal microbial balance and ascites incidence, in broiler chicks raised at high altitude area. Even though these findings may be of interest for the poultry industry, they may particularly be relevant in those areas characterized by high altitude such as Northwest China regions.

• The Korean Journal of Franchise Management
• /
• 제13권3호
• /
• pp.31-43
• /
• 2022

Purpose: Service quality is a topic of constant interest in marketing research and practitioners. Service quality is an important factor influencing performance even in the context of coffee shops, and research on service quality management strategies continues by coffee shop researchers and practitioners. The service quality of coffee shops is a source of competitive advantage and is an important factor in enhancing customer and business performance. This study aims to identify the effects of cognitive evaluation on emotional and behavioral responses using a cognitive-emotional-behavioral framework and SOR model in the coffee shop context. Cognitive evaluation (service quality) consists of tangibles, responsiveness, assurance, reliability, and empathy dimensions. Research design, data, and methodology: In the proposed model, positive and negative emotions and satisfaction mediate the relationship between service quality and money to spend and visit frequency. The data were collected from customers who visited a coffee shop within the last 1 month. The survey was conducted for about one month. Among a total of 300 distributed questionnaires 261 responses were used for data analysis. The data were analyzed using frequency analysis, measurement model analysis, and structural equation modeling analysis with SPSS 28.0 and SmartPLS 4.0. Results: Tangibles, responsiveness, assurance, and empathy had significant positive effects on positive emotion, while only reliability had a significant negative effect on negative emotion. Both positive and negative emotions had significant positive effects on customer satisfaction, but not on money to spend and visit frequency. Lastly, customer satisfaction had significant positive effects on money to spend and visit frequency. Conclusions: The study revealed the relative weight of cognitive factors on customer emotions and confirmed the validity of SOR model. The fact that tangibility is the most important factor in increasing positive emotions and reliability is the most important factor in reducing negative emotions provides a direction for emotional branding strategies using the service quality mix of coffee shops. This study confirmed the full mediating role of satisfaction between positive and negative emotions and consumer behaviors (money to spend and visit frequency). This infers that when a coffee shop increases customer satisfaction through customer emotion management, the customer's money to spend and visit frequency in the coffee shop increases.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제27권1호
• /
• pp.1-8
• /
• 2023

At construction sites, interest in the production of precast materials is increasing due to off-site conditions due to changes in construction site conditions due to increased labor costs and the Act on the Punishment of Serious Accidents. In particular, the precast prestressed hollow slab has a hollow shape in the cross section, so structural performance is secured by reducing weight and controlling deflection through stranded wires. With the application of structural standards, the urgency of securing fire resistance performance is emerging. In this study, a fire-resistance cross section was developed by reducing the concrete filling rate in the cross section and improving the upper and lower flange shapes by optimizing the hollow shape in the cross section of the slab to have the same or better structural performance and economic efficiency compared to the existing hollow slab. The PC hollow slab to which this was applied was subjected to a two-hour fire resistance test using the cross-sectional thickness as a variable, and as a result of the test, fire resistance performance (load bearing capacity, heat shielding property, flame retardance property) was secured. Based on the experimental results, it is determined that fire resistance modeling can be established through numerical analysis simulation, and prediction of fire resistance analysis is possible according to the change of the cross-sectional shape in the future.

• Journal of Korea Trade
• /
• 제26권7호
• /
• pp.145-166
• /
• 2022

Purpose - The field of online videos has seen rapid changes in information and communications technology (ICT) development. Despite active academic research on the use of online platforms, few studies have analyzed the relative importance among the factors determined. In this study, the relative importance of factors found in previous studies was identified for users of online video platforms in China and Korea. Through this, factors that should be considered first in research on online video use were derived. In addition, the quality level of online video platforms currently used in China and Korea was measured and used for analysis. The analysis results can provide information for companies to enter Chinese and Korean markets and also be useful to platform providers aiming to increase usage. Design/methodology - Among the factors of Online Video Usage identified in previous studies, 13 factors to be studied were selected through focus group interviews and hierarchized into 2 layers. For the analytic hierarchy process (AHP), each factor was designed as a pairwise comparison questionnaire. The survey included questions on the quality of online video platform currently in use. Data collection was conducted on 16 platforms in China and 11 platforms in Korea, and the relative importance of factors and user perspectives was compared and analyzed using importance performance analysis (IPA). In the analytical process, platforms were divided into over-the-top (OTT) group and Creator group according to the weight of user-generated content, and data analysis focused on these groups. Findings - As a result of AHP, China and Korea showed both "Fun" and "Interests" factors at the top, while the importance of the Entertainment factor "Vicarious satisfaction" was very different for China and Korea. "Relationship with content creators" was the most important factor in China, but it ranked the lowest in Korea. The IPA showed that the factors with high importance and performance were fun, interests, and easy accessibility for both China and Korea. In contrast, the factors that showed low performance compared to high importance in China were relationship with content creators, relationship with acquaintances/friends, and trustworthiness. As for Korea, vicarious satisfaction was observed; thus, this study has raised the need for academic and industrial interest in vicarious satisfaction. The results show that fun, interests, vicarious satisfaction, and easy accessibility of the platform are factors that must be included in further studies on online videos. Originality/value - Existing studies related to the use of online platforms have derived factors or focused on the influence relationship between factors and performance. However, few studies have analyzed the relative importance among the determined factors. This paper explores factors to be considered in future studies by deriving the relative importance between these factors from the perspective of users in China and Korea.