• The Korean Journal of Food And Nutrition
• /
• v.25 no.2
• /
• pp.330-337
• /
• 2012

The aim of this study was to evaluate the status of consumption and consumer satisfaction of dietary fiber supplements. The survey was conducted using a self-recorded questionnaire developed to meet the purpose of this study. The characteristics of the subjects who have taken dietary fiber supplements in the past are as follows: distributions of socioeconomic variables showed that the highest-ranked group(the group that reported the highest consumption of dietary fiber supplements) was professionals with a college degree or higher degree. In addition, the highest-ranked group were the most healthy, nonsmokers and reported drinking habits of '1~2 times/week'. Regarding the health status of those surveyed, digestive disease and constipation were the most common complaints. The majority responded with 'health concerns' to the question that asked the reason for their purchase of the dietary fiber supplements. Three major places respondents could find dietary fiber supplements were 'through the internet', 'the market', 'the pharmacy' in descending order. The compositions of dietary fiber products varied. 'konjac', 'cellulose', 'psyllium husks' were the most popular components consumed by the subjects. The average duration of product consumption was less than one month. In terms of satisfaction levels(satisfaction was ranked from 1 to 5), 'taste' and 'type' scored the highest in satisfaction levels while 'price' ranked the lowest. When subjects were asked about self-awareness regarding the physiological efficacy of dietary fiber supplements, the responses were positive in 'bowel movement' and 'weight loss'. Further research is required to improve the quality of dietary fiber supplements in order to assist consumers in selecting the appropriate products.

• Journal of the Korean Ceramic Society
• /
• v.38 no.9
• /
• pp.829-833
• /
• 2001

There have been many studies about the chemical corrosion of converter's refractories. However, few studies have been reported for the stress corrosion induced by the weight of the refractories and by the two bottom shape models designed for the converter. In this study, the stress distributions of the two converter models were analyzed by FEM. Model 1 has the step edge shape and model 2 has the round edge shape. Simulation results show that model 2 of round bottom edge has higher gravitational stress just below the slag line than the model 1. Model 2 is considered to suffers more serious corrosion than model 1 during the middle working stage by the thermal and chemical factors.

• Journal of Biomedical Engineering Research
• /
• v.34 no.1
• /
• pp.14-23
• /
• 2013

In this study, biomechanical stability of the newly developed revision total knee arthroplasty (rTKA) was evaluated through strain and stress distribution analysis within the implanted proximal tibia using a three-dimensional finite element (FE) analysis. 2000N of compressive load (about 3 times body weight) was applied to the condyle surface on spacer, sharing by the medial (60%) and lateral (40%) condyles simulating a stance phase before toe-off. The results showed that PVMS within the revision total knee arthroplasty and the proximal tibia were less than yield strength considering safe factor 4.0 (rTKA: less than 10%, Cortical bone: less than 70%, Cancellous bone: less than 70%). The materials composed of them and the strain and stress distributions within the proximal tibia were generally well matched with those of a traditional revision total knee arthoplasty (Scorpio TS revision system, Stryker Corp., Michigan, USA) without the critical damage strain and stress, which may reduce the capacity for bone remodeling, leading to bone degeneration. This study may be useful to design parameter improvement of the revision total knee arthoplasty in biomechanical stability point of view beyond structural stability of revision total knee arthoplasty itself.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.6
• /
• pp.717-731
• /
• 2011

To clarify relationships between the abundance and biological characteristics of Pacific salmon Oncorhynchus spp., we analyzed spatiotemporal changes in fork length, body weight, and an index of relative abundance (catch per unit effort, CPUE) for pink salmon (O. gorbuscha), chum salmon (O. keta), and sockeye salmon (O. nerka) collected by research gill-nets from the T/V Oshoro-maru and the T/V Hokusei-maru of Hokkaido University in the North Pacific during 1953-2007. Populations of each species were distributed throughout the western Bering Sea, eastern Bering Sea (EB), western North Pacific (WNP), central North Pacific (CNP), eastern North Pacific (ENP), and Okhotsk Sea. Since 1970, the average body size of chum salmon at ocean ages 0.3-0.4 has generally declined in the WNP and CNP. However, the average body sizes of sockeye and pink salmon have not shown temporal changes. Chum salmon showed significant negative (positive) correlations between CPUE and body size for populations in CNP (ENP) at ocean ages 0.2-0.3 (age 0.1) for both sexes. In general, sockeye salmon also showed significant negative (positive) correlations between CPUE and body size for populations in the EB at ocean ages X.2-X.3 (age X.1) for both sexes, except in CNP at age 2. Our results suggest that better growth by chum and sockeye salmon in the early periods of their ocean life histories might produce higher abundance. This higher abundance, which might also be affected by overlapping distributions among Pacific salmon species and populations in certain seas, in turn appears to cause density-dependent declines in growth in the following ocean life history period due to the limited carrying capacity of the seas. To understand complex dynamics in Pacific salmon species in the North Pacific Ocean, research on interactions among species and populations is needed.

• Advanced Composite Materials
• /
• v.17 no.3
• /
• pp.225-233
• /
• 2008

The analysis in this paper is focused on the pattern of mixing of filaments over a cross-section of hybrid yarns according to different combinations of reinforcement and matrix filament yarns through microscopic view. The volume content of filament in hybrid yarn cross-section was maintained at 50% for both reinforcement and matrix, and the hybrid yarns count at 600 tex throughout the experiments. It was observed from the experiments that diameters of reinforcement and matrix filaments have strong effects particularly on the pattern of mixing of filaments over a cross-section of hybrid yarns such that the hybrid yarns with more or less equal diameters of reinforcement and matrix filaments showed considerably even distributions over the hybrid yarn cross-section. This paper also investigates the possibility of hybridizing carbon/aramid, carbon/glass and aramid/glass matrices through the commingling process. In the experiment, several process parameters were selected and they include pressure, yarn oversupply-rate and different nozzle types. As a result of these experiments, it was concluded that the hybridized materials show better performance than individual reinforced filament yarns in terms of mechanical properties. For small tensile forces, the carbon/glass/matrix combination turned out to be good enough for general purpose applications.

• Structural Engineering and Mechanics
• /
• v.66 no.1
• /
• pp.15-25
• /
• 2018

Post-construction subgrade settlement especially differential settlement, has become a key issue in construction and operation of non-ballasted track on high-speed railway soil subgrade, which may also affect the dynamic performance of passing trains. To estimate the effect of differential subgrade settlement on the mechanical behaviors of the vehicle-slab track system, a detailed model considering nonlinear subgrade support and initial track state due to track self-weight is developed. Accordingly, analysis aiming at a typical high-speed vehicle coupled with a deteriorated slab track owing to differential subgrade settlement is carried out, in terms of two aspects: (i) determination of an initial mapping relationship between subgrade settlement and track deflections as well as contact state between track and subgrade based on a semi-analytical method; (ii) simulation of dynamic performance of the coupled system by employing a time integration approach. The investigation indicates that subgrade settlement results in additional track irregularity, and locally, the contact between the concrete track and the soil subgrade is prone to failure. Moreover, wheel-rail interaction is significantly exacerbated by the track degradation and abnormal responses occur as a result of the unsupported areas. Distributions of interlaminar contact forces in track system vary dramatically due to the combined effect of track deterioration and dynamic load. These may not only intensify the dynamic responses of the coupled system, but also have impacts on the long-term behavior of the track components.

• Food Science and Biotechnology
• /
• v.14 no.3
• /
• pp.375-379
• /
• 2005

Physicochemical properties, intestinal microbial growth, and inhibitory effects of alcohol-insoluble polysaccharide (AIP) extracted from cucumber peel were investigated. AIP was composed of 14.54% crude protein, 1.04% crude lipid, 13.74 % crude ash, 9.1% soluble dietary fiber, and 41.2% insoluble dietary fiber. AIP showed low bulk density (0.18 g/mL) and water-holding capacity (6.39 g/g), and high oil-holding capacity (3.96 g/g). Pectic substance fractions [water-soluble pectic substance (WSP), ethylenediaminetetraacetic acid-soluble pectic substance (ESP), and alkali-soluble pectic substances (ASP)] and hemicellulose fractions [1 M KOH-soluble hemicellulose (KHP1) and 4 M KOH-soluble hemicellulose (KHP4)] were obtained from sequential chemical fractionation of AIP. WSP showed higher total sugar contents than total uronic acid contents, whereas opposite results were observed in ESP and ASP. Molecular weight distributions of three pectic substance fractions were in order of ASP>ESP>WSP. Ion exchange chromatogram pattern of WSP was different from those of ESP and ASP. Major component of WSP was fraction eluted by 0.05 M ammonium acetate buffer, whereas that of ESP and ASP was fraction eluted by 0.2 M NaOH. WSP and ASP showed growth-promoting activities against Lactobacillus brevis, Bifidobacterium bifidum, and B. longum, whereas B. bifidum and B. longum for ESP. KHP1 and KHP4 fractions had significant growth-promoting activities against B. bifidum.

• Journal of the Korean Physical Society
• /
• v.73 no.9
• /
• pp.1340-1345
• /
• 2018

Mo-10 at.% Cu nanocomposite powders were fabricated by using planetary ball-milling (PBM), a mechanical alloying technique for preparing nanocomposite alloy powders of metals with mutual insolubility, and the variations in the physical and the chemical characteristics with the process conditions were investigated. We observed that Mo-10 at.% Cu was an appropriate composition to ensure a good alloying grade and minimal welding between particles. The influences of the temperature and the milling conditions on the mechanical alloying process and the phase change of Mo-10 at.% Cu composite powders were investigated, and the particle and the grain sizes of the powders after mechanical alloying were confirmed. The Mo-10 at.% Cu powders showed homogeneous elemental distributions and no phase changes up to $1200^{\circ}C$; their compositions were retained after the mechanical alloying process. The finest grain size obtained was about 5 nm for powders processed using optimum PBM processing conditions: ball-to-powder weight ratio of 5 : 1, ambient air atmosphere, a milling time of 20 h, a rotation speed of 200 rpm, and a stearic acid content of 4 wt.% produced superfine-grained Mo-10 at.% Cu nanocomposite powders with an average grain size of 5 nm (which is smaller than that of other similar materials reported in the literature). The analytical results confirmed that the PBM technique presented here is a promising method for preparing superfine-grained Mo-10 at.% Cu powders with improved properties.

• Journal of agriculture & life science
• /
• v.53 no.2
• /
• pp.65-75
• /
• 2019

Stem and root of elm trees have used as traditional medical materials, but there is little information on the distribution and resources of habitats. Korean native growing Ulmus spp. (U. davidiana var. Japonica, U. parvifolia, U. davidiana, and U. macrocarpa) genetic resources studied through The National Forest Inventory of Korea data and field survey. The distributions of U. davidiana var. japonica according to elevation distributed evenly. Both U. parvifolia and U. davidiana were inhabited mostly at less than 200 m of altitude. Each Ulmaceae species widely were distributed nationwide, but a dominant species was different depending on locals. It observed that Ulmaceae inhabits mainly in steep slopes of 31-45 degrees. Most of the habitats regenerated by natural seeding and the most abundant species were a codominant tree. Distribution of trees in U davidiana var. japonica was 7 m-13 m, and in young U. parvifolia and U. macrocarpa, more than 25% of young trees less than 7 m observed. The distribution of the diameter of breast height of the U. davidiana var. japonica was 46.4% for 11-20 cm, 52.6% for 11-20 cm in U. parvifolia. The average T/R ratio was 0.83, and the mean weight ratio of root bark was 62%. As the results of this study, the domestic Ulmaceae biomassare very small. It is difficult to harvest in that the habitat on the slope. Thus, it is too hard to develop functional materials using biomass at present. Therefore, it is necessary to develop technology for the selection and propagation of elite trees of Ulmaceae.

• Journal of Ginseng Research
• /
• v.46 no.1
• /
• pp.115-125
• /
• 2022

Background: Ginsenosides (GS) have potential value as cosmetic additives for prevention of skin photoaging. However, their protective mechanisms against skin barrier damage and their active monomeric constituents are unknown. Methods: GS monomer types and their relative proportions were identified. A UVB-irradiated BALB/c hairless mouse model was used to assess protective effects of GS components on skin epidermal thickness and transepidermal water loss (TEWL). Skin barrier function, reflected by filaggrin (FLG), involucrin (IVL), claudin-1 (Cldn-1), and aquaporin 3 (AQP3) levels and MAPK phosphorylation patterns, were analyzed in UVB-irradiated hairless mice or HaCaT cells. Results: Total GS monomeric content detected by UPLC was 85.45% and was largely attributed to 17 main monomers that included Re (16.73%), Rd (13.36%), and Rg1 (13.38%). In hairless mice, GS ameliorated UVB-induced epidermal barrier dysfunction manifesting as increased epidermal thickness, increased TEWL, and decreased stratum corneum water content without weight change. Furthermore, GS treatment of UVB-irradiated mice restored protein expression levels and epidermal tissue distributions of FLG, IVL, Cldn-1, and AQP3, with consistent mRNA and protein expression results obtained in UVB-irradiated HaCaT cells (except for unchanging Cldn-1 expression). Mechanistically, GS inhibited JNK, p38, and ERK phosphorylation in UVB-irradiated HaCaT cells, with a mixture of Rg2, Rg3, Rk3, F2, Rd, and Rb3 providing the same protective MAPK pathway inhibition-associated upregulation of IVL and AQP3 expression as provided by intact GS treatment. Conclusion: GS protection against UVB-irradiated skin barrier damage depends on activities of six ginsenoside monomeric constituents that inhibit the MAPK signaling pathway.