References
- E. Rubin, JL. Farber, Bone and Joints: Pathology 2nd edition, Press, 1994, pp. 1273-2347.
- A.J. Bailey, C. Buckland-Wright, and D. Metz, "The role of bone in osteoarthritis," Age Ageing, vol. 30, no. 5, pp.374-378, 2001. https://doi.org/10.1093/ageing/30.5.374
- A.J. Carr, O. Robertsson, and S. Graves, "Knee replacement," Lancet, vol. 379, no. 9823, pp. 1331-1340, 2012. https://doi.org/10.1016/S0140-6736(11)60752-6
- G.A. Engh, D.J. Ammeen, "Bone loss with revision total knee arthroplasty: defect classification and alternatives for reconstruction," Instr Course Lect, vol. 48, no. pp. 167-175, 1999.
- H.D. Clarke, R.T. Trousdale, "Component fracture in total knee arthroplasty," Knee, vol. 6, no. 4, pp. 261-267, 1999. https://doi.org/10.1016/S0968-0160(99)00025-3
- Matthew, S. A., Peter F. S. and William J. H. "Knee failure mechanisms after total knee arthroplasty." Techniques in Knee Surgery, vol. 3, no. 1, pp. 55-59, 2004. https://doi.org/10.1097/00132588-200403000-00008
- C.J. Lavernia, M.K. Drakeford, and A.K. Tsao, "Revision and primary hip and knee arthroplasty. A cost analysis," Clin Orthop Relat Res, vol. no. 311, pp. 136-141, 1995.
- K.P. Emmerson, C.G. Moran, and I.M. Pinder, "Survivorship analysis of the Kinematic Stabilizer total knee replacement: a 10-to 14-year follow-up," J Bone Joint Surg Br, vol. 78, no. 3, pp. 441-445, 1996.
- C.S. Ranawat, C.P. Luessenhop, and J.A. Rodriguez, "The press-fit condylar modular total knee system. Four-to-sixyear results with a posterior-cruciate-substituting design," J Bone Joint Surg Am, vol. 79, no. 3, pp. 342-348, 1997. https://doi.org/10.2106/00004623-199703000-00004
- D.J. Weir, C.G. Moran and I.M. Pinder, "Kinematic condylar total knee arthroplasty. 14-year survivorship analysis of 208 consecutive cases," J Bone Joint Surg Br, vol. 78, no. 6, pp. 907-911, 1996. https://doi.org/10.1302/0301-620X78B6.6678
- P. Ducheyne, A. Kagan, 2nd and J.A. Lacey, "Failure of total knee arthroplasty due to loosening and deformation of the tibial component," J Bone Joint Surg Am, vol. 60, no. 3, pp. 384-391, 1978. https://doi.org/10.2106/00004623-197860030-00021
- J.N. Insall, R.W. Hood, and L.B. Flawn, "The total condylar knee prosthesis in gonarthrosis. A five to nine-year followup of the first one hundred consecutive replacements," J Bone Joint Surg Am, vol. 65, no. 5, pp. 619-628, 1983. https://doi.org/10.2106/00004623-198365050-00006
- T. Tsonga, S. Kapetanakis, and C. Papadopoulos, "Evaluation of improvement in quality of life and physical activity after total knee arthroplasty in greek elderly women," Open Orthop J, vol. 5, no. pp. 343-347, 2011. https://doi.org/10.2174/1874325001105010343
- J. Bugala-Szpak, D. Kusz, and I. Dyner-Jama, "Early evaluation of quality of life and clinical parameters after total knee arthroplasty," Ortop Traumatol Rehabil, vol. 12, no. 1, pp. 41-49, 2010.
- M.I. Gusso, A. Capone, and R. Civinini, "The spacer block technique in revision of total knee arthroplasty with septic loosening," Chir Organi Mov, vol. 80, no. 1, pp. 21-27, 1995.
- J.W. Barrington, A. Sah, and H. Malchau, "Contemporary cruciate-retaining total knee arthroplasty with a pegged tibial baseplate. Results at a minimum of ten years," J Bone Joint Surg Am, vol. 91, no. 4, pp. 874-878, 2009. https://doi.org/10.2106/JBJS.G.01609
- D.C. Markel, J.E. Femino, and P. Farkas, "Analysis of lower extremity embolic material after total knee arthroplasty in a canine model," J Arthroplasty, vol. 14, no. 2, pp. 227-232, 1999. https://doi.org/10.1016/S0883-5403(99)90131-6
- T.K. Fehring, S. Odum, and C. Olekson, "Stem fixation in revision total knee arthroplasty: a comparative analysis," Clin Orthop Relat Res, vol. no. 416, pp. 217-224, 2003. https://doi.org/10.1097/01.blo.0000093032.56370.4b
- R.L. Barrack, C. Rorabeck, and M. Burt, "Pain at the end of the stem after revision total knee arthroplasty," Clin Orthop Relat Res, vol. no. 367, pp. 216-225, 1999.
- D. Taylor, "Bone maintenance and remodeling: a control system based on fatigue damage," J Orthop Res, vol. 15, no. 4, pp. 601-606, 1997. https://doi.org/10.1002/jor.1100150417
- M. Tew, W. Waugh, "Tibiofemoral alignment and the results of knee replacement," J Bone Joint Surg Br, vol. 67, no. 4, pp. 551-556, 1985.
- E. Kellis, "Tibiofemoral joint forces during maximal isokinetic eccentric and concentric efforts of the knee flexors," Clin Biomech (Bristol, Avon), vol. 16, no. 3, pp. 229-236, 2001. https://doi.org/10.1016/S0268-0033(00)00084-X
- I.J. Harrington, "A bioengineering analysis of force actions at the knee in normal and pathological gait," Biomed Eng, vol. 11, no. 5, pp. 167-172, 1976.
- A. Completo, A. Rego, and F. Fonseca, "Biomechanical evaluation of proximal tibia behaviour with the use of femoral stems in revision TKA: an in vitro and finite element analysis," Clin Biomech (Bristol, Avon), vol. 25, no. 2, pp. 159-165, 2010. https://doi.org/10.1016/j.clinbiomech.2009.10.011
- P.J. Fonseca, J.M. Alves, "A new concept in underwater high fidelity low frequency sound generation," Rev Sci Instrum, vol. 83, no. 5, pp. 055007, 2012. https://doi.org/10.1063/1.4717680
- R.L. Austman, J.S. Milner, D.W. Holdsworth, "The effect of the density-modulus relationship selected to apply material properties in a finite element model of long bone," J Bio mech, vol. 41, no. 15, pp. 3171-3176, 2008.
- G.H. Van Lenthe, M.C. de Waal Malefijt, and R. Huiskes, "Stress shielding after total knee replacement may cause bone resorption in the distal femur," J Bone Joint Surg Br, vol. 79, no. 1, pp. 117-122, 1997. https://doi.org/10.1302/0301-620X.79B1.6808
- A.G. Au, V. James Raso, and A.B. Liggins, "Contribution of loading conditions and material properties to stress shielding near the tibial component of total knee replacements," J Biomech, vol. 40, no. 6, pp. 1410-1416, 2007. https://doi.org/10.1016/j.jbiomech.2006.05.020
- C.A. Pattin, W.E. Caler, and D.R. Carter, "Cyclic mechanical property degradation during fatigue loading of cortical bone," J Biomech, vol. 29, no. 1, pp. 69-79, 1996. https://doi.org/10.1016/0021-9290(94)00156-1
- M. Taylor, K.E. Tanner and M.A. Freeman, "Finite element analysis of the implanted proximal tibia: a relationship between the initial cancellous bone stresses and implant migration," J Biomech, vol. 31, no. 4, pp. 303-310, 1998. https://doi.org/10.1016/S0021-9290(98)00022-0
- U. Simon, P. Augat, A. Ignatius, "Influence of the stiffness of bone defect implants on the mechanical conditions at the interface: a finite element analysis with contact," J Biomech, vol. 36, no. 8, pp. 1079-1086, 2003. https://doi.org/10.1016/S0021-9290(03)00114-3
- A.G. Au, A.B. Liggins, V.J. Raso, "A parametric analysis of fixation post shape in tibial knee prostheses," Med Eng Phys, vol. 27, no. 2, pp. 123-134, 2005. https://doi.org/10.1016/j.medengphy.2004.09.010
- A.G. Au, V. James Raso, A.B. Liggins, "Contribution of loading conditions and material properties to stress shielding near the tibial component of total knee replacements," J Biomech, vol. 40, no. 6, pp. 1410-1416, 2007. https://doi.org/10.1016/j.jbiomech.2006.05.020
- N.A. Ramaniraka, L.R. Rakotomanana and P.F. Leyvraz, "The fixation of the cemented femoral component. Effects of stem stiffness, cement thickness and roughness of the cement-bone surface," J Bone Joint Surg Br, vol. 82, no. 2, pp. 297-303, 2000. https://doi.org/10.1302/0301-620X.82B2.9613
Cited by
- The Correlation Analysis through the Contact Stress and the Curvature Radius according to Flexion Angle for the Design of Unicompartment Knee Replacement vol.37, pp.6, 2016, https://doi.org/10.9718/JBER.2016.37.6.215