• Journal of Veterinary Clinics
• /
• v.33 no.2
• /
• pp.81-86
• /
• 2016

Cystatin C is a low molecular weight 13 kilodalton protein. It is known to be a more sensitive marker of glomerular filtration rate than creatinine in humans. The purpose of the present study was to demonstrate the changes of renal markers including cystatin C according to the severity of chronic mitral valve insufficiency (CMVI) and to investigate the clinical relevance of cystatin C as an early renal marker in dogs with CMVI. A retrospective study was performed to assess renal function according to International Small Animal Cardiac Health Council (ISACHC) system classification of heart failure in dogs with CMVI. Thirty seven dogs were divided into a group 1 (healthy dogs ; n = 10), a group 2 (ISACHC I ; n = 10) and a group 3 (ISACHC II-III ; n = 17). In all dogs, serum concentrations of bun (sUr), creatinine (sCr) and cystatin C (sCys-C) were measured with an automated analyzer. In dogs with CMVI, sCys-C concentrations were significantly correlated with sCr concentrations and were independent of age, BW, SBP, and sex. Renal dysfunction tended to occur more frequently as the severity of CMVI increases. In dogs with mild CMVI, only sCys-C concentrations were statistically higher than in healthy dogs. This study demonstrates the clinical relevance of sCys-C. sCys-C may be a valuable renal marker for early diagnosis of renal dysfunction in dogs with CMVI.

• Nuclear Engineering and Technology
• /
• v.43 no.2
• /
• pp.149-158
• /
• 2011

Metal waste generated from the pyroprocessing of 10 MtU of spent fuel was classified by comparing the specific activity of a relevant radionuclide with the limit value of the specific activity specified in the Korean acceptance criteria for a lowand intermediate-level waste repository. A Korean Optimized Fuel Assembly design with a 17${\times}$17 array, an initial enrichment of 4.5 weight-percent, discharge burn-up of 55 GWD/MtU, and a 10-year cooling time was considered. Initially, the mass and volume of each structural component of the assembly were calculated in detail, and a source term analysis was subsequently performed using ORIGEN-S for these components. An activation cross-section library generated by the KENO-VI/ORIGEN-S module was utilized for top-end and bottom-end pieces. As a result, an Inconel grid plate, a SUS plenum spring, a SUS guide tube subpart, SUS top-end and bottom-end pieces, and an Inconel top-end leaf spring were determined to be unacceptable for the Gyeongju low- and intermediate-level waste repository, as these waste products exceeded the acceptance criteria. In contrast, a Zircaloy grid plate and guide tube can be placed in the Gyeongju repository. Non-contaminated Zircaloy cladding occupying 76% of the metal waste was found to have a lower level of specific activity than the limit value. However, Zircaloy cladding contaminated by fission products and actinides during the decladding process of pyroprocessing was revealed to have 52 and 2 times higher specific activity levels than the limit values for alpha and $^{90}Sr$, respectively. Finally, it was found that 88.7% of the metal waste from the 17${\times}$17 Korean Optimized Fuel Assembly design should be disposed of in a deep geological repository. Therefore, it can be summarized that separation technology with a higher decontamination factor for transuranics and strontium should be developed for the efficient management of metal waste resulting from pyroprocessing.

• Journal of Preventive Medicine and Public Health
• /
• v.55 no.1
• /
• pp.10-18
• /
• 2022

Disability-adjusted life-year (DALY) estimates may vary according to factors such as the standard life expectancy, age weighting, time preference and discount rate, calculation of disability weights, and selection of the estimation method. DALY estimation methods are divided into the following 3 approaches: the incidence-based approach, the pure prevalence-based approach, and the hybrid approach. These 3 DALY estimation approaches each reflect different perspectives on the burden of disease using unique characteristics, based on which the selection of a suitable approach may vary by the purpose of the study. The Global Burden of Disease studies, which previously estimated DALYs using the incidence-based approach, switched to using the hybrid approach in 2010, while the National Burden of Disease studies in Korea still mainly apply the incidence-based approach. In order to increase comparability with other international burden of disease studies, more DALY studies using the prevalence-based approach need to be conducted in Korea. However, with the limitations of the hybrid approach in mind, it is necessary to conduct more research using a disease classification system suitable for Korea. Furthermore, more detailed and valid data sources should be established before conducting studies using a broader variety of DALY estimation approaches. This review study will help researchers on burden of disease use an appropriate DALY estimation approach and will contribute to enhancing researchers' ability to critically interpret burden of disease studies.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.5
• /
• pp.675-681
• /
• 2022

Recently, with the development of IoT technology and AI, unmanned and automated in various fields, interest in video processing, which is the basis for automation such as object recognition and object classification, is increasing. Various studies have been conducted on noise removal in the video processing process, which has a significant impact on image quality and system accuracy and reliability, but there is a problem that it is difficult to restore images for areas with high impulse noise density. In this paper proposes a filter algorithm based on partial mask and Lagrange interpolation to restore the damaged area of impulse noise in the image. In the proposed algorithm, the filtering process was switched by comparing the filtering mask with the noise estimate and the purge weight was calculated based on the low frequency component and the high frequency component of the image to restore the image.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.2
• /
• pp.207-213
• /
• 2022

Recently, with the improvement of the performance of IoT technology and AI, automation and unmanned work are progressing in a wide range of fields, and interest in image processing, which is the basis of automation such as object recognition and object classification, is increasing. Image noise removal is an important process used as a preprocessing step in an image processing system, and various studies have been conducted. However, in most cases, it is difficult to preserve detailed information due to the smoothing effect in high-frequency components such as edges. In this paper, we propose an algorithm to restore damaged images in AWGN(additive white Gaussian noise) using fuzzy weights based on Gaussian distribution. The proposed algorithm switched the filtering process by comparing the filtering mask and the noise estimate with each other, and reconstructed the image by calculating the fuzzy weights according to the low-frequency and high-frequency components of the image.

• Journal of architectural history
• /
• v.32 no.1
• /
• pp.61-72
• /
• 2023

Korean architecture classifies Banja (the decorated flat of the ceiling visible from the inside) of Royal Palaces into two types: Woomul(water-well, 井) banja, which inserts rectangular wooden board into lattice frame, and paper banja, which applies paper to the flat ceiling. Such classification was established in the 19th century. Before that, Banja was classified according to what was inserted into the lattice frame, either wooden or paper board. At first, the banja that used paper board was widely installed regardless of the purpose or nobility of the building. However, since the 17th century, the use of paper board banja became mostly restricted to Ondol (Korean floor heating system) rooms which are characterized by private usage and the importance of heating, and it was considered inferior to wooden board banja in terms of rank or grace. The contemporary paper banja was mainly installed in low-rank ondol rooms until the late 19th century to early 20th century, when roll-type wallpaper was introduced from the West and the paper banja came to decorate the King's and Queen's bedrooms. The traditional paper board banja benefits heat reservation, reduces the weight of the ceiling, and allows the adjustment of the lattice frame size. Furthermore, it can feature unique artistry if covered with blue, white, or red Neung-hwa-ji (traditional flower pattered paper).

• Journal of the Korea Convergence Society
• /
• v.13 no.1
• /
• pp.23-30
• /
• 2022

The failure of the reefer container causes a great loss of cost, but the current reefer container alarm system is inefficient. Existing studies using simulation data of refrigeration systems exist, but studies using actual operation data of refrigeration containers are lacking. Therefore, this study classified the causes of failure using actual refrigerated container operation data. Data imbalance occurred in the actual data, and the data imbalance problem was solved by comparing the logistic regression analysis with ENN-SMOTE and class weight with the 2-stage algorithm developed in this study. The 2-stage algorithm uses XGboost, LGBoost, and DNN to classify faults and normalities in the first step, and to classify the causes of faults in the second step. The model using LGBoost in the 2-stage algorithm was the best with 99.16% accuracy. This study proposes a final model using a two-stage algorithm to solve data imbalance, which is thought to be applicable to other industries.

• Clinics in Shoulder and Elbow
• /
• v.13 no.1
• /
• pp.92-98
• /
• 2010

Purpose: To analyze results of treating acromioclavicular injuries using clavicle hook plates. Materials and Methods: Between February 2008 and April 2010, 18 patients with acromioclavicular joint injury treated by clavicle hook plates were reviewed. Using the Rockwood classification, 7 dislocations were classified as type III injuries and 11 as type V injuries. Implant removal was done at least 3 months from initial fixation. Simple X-rays were taken for comparing the state of reduction, and clinical outcomes were evaluated by the Korean Shoulder Scoring System and the American Shoulder Elbow Society score. The average follow-up period was 9 months. Results: On weight bearing X-rays, the average coracoclavicular distance showed a 114% increase compared to the contralateral side at the time of injury. It decreased to 23% by the last follow-up. The mean Korean Shoulder Scoring System and the American Shoulder Elbow Society score were 80 and 74 at the last follow-up. Conclusion: The immediate stability these plates provide allows rapid rehabilitation. Clavicle hook plate fixation for acromioclavicular joint dislocation is considered an effective method for ensuring satisfactory results both radiologically and clinically.

• Journal of the Korean Ceramic Society
• /
• v.42 no.3 s.274
• /
• pp.182-187
• /
• 2005

There are many kinds of polycarboxylate superplasticizer as a functional classification which are introduced to domestic; Water Reducer, Retention, Ultra High Strength Superplasicizer. These are showed different physical behaviors because of the difference in the chemical system and the manners after cement mixing. In the case of water reducer, when $1.2\% of cement weight used, water reducing which is over $30\% is observed, but it take with segregation and the reduction of slump flow shows over 30 cm after 45 min of concrete produce. In the case of retention, when the same quantity used, water reducing which is about $25\% is observed and slump flow which is up to 45 min shows under 15 cm. And in the case of ultra high strength, when $1.2\% of cement weight used, water reducing which is over $30\% is observed, and slump flow which is up to 45 min recorded fewer than 15 cm. Compressive strength of ultra high strength superplasticizer has take effect of early age strength, and in the condition of specific mixing, 18 h-compressive strength is insured for more than $60\;Kgf/cm^2$ and 24 h-compressive strength is insured for more than $80\;Kgf/cm^2$.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.4
• /
• pp.115-125
• /
• 2007

Grould Reaction force(GRF) is important in human movements and GRF measurements are one of the most frequently used tool in biomechanical studies. In the studies of the golf swing motion, people refer to GRF as weight transfer. A successful golf swing motion requires many segments activation sequences which are controled by the nerve system. Due to the inter- and intra-individual variability of the human movement and the movement strategies, reliability of the measurements are important in human movement studies. Previous golf researches were based on group studies and certain events' values were analyzed. The purposes of this study were to determine the number of trials for the reliable golf swing GRF data collection, to reveal the variability level of the meaningful components of the golf swing GRF, and to classify the types of the golf swing GRF patterns. Twenty three male professional golfers($26.4{\pm}6.6$ years, $174.3{\pm}5.2\;cm$, $71.3{\pm}6.5\;kg$) signed an informed consent form prior to participation in this study. GRFs of driver swings were collected with Kistler 9285 force platform and 9865A amplifier, and calculated by the KwonGRF program(Visol, Korea). Sampling frequency was 1080 Hz. GRF data were trimmed from 1.5 s prior to the impact to 0.5 s after the impact. The number of trials for the reliable GRF collection was determined when the change in floating mean overs the 25 % of the standard deviation of that variable. Variabilities of the variables were determined by the coefficient of variation(CV) of 10 %. The types of GRF patterns were determined by visual inspection of the peak GRF shapes. The minimum number of trials for the reliable golf swing GRF data collection was five. Ten-trial seems more conservative. The value of the peak GRF was more reliable than the value of the impact GRF. The CV of the peak GRF and impact GRF were 7.4 %, 15.2 %, respectively. Because of the +/- sigh of the peak GRF appearance time, it was impossible to calculate CV of the peak GRF appearance time. Golf swing GRF patterns were classified as sing peak type, double peak type, and plateau peak type. This classification suggests the presence of the different golf swing weight transfer strategies.