Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지
DOI QR코드

DOI QR Code

WASTE CLASSIFICATION OF 17×17 KOFA SPENT FUEL ASSEMBLY HARDWARE

  • Received : 2010.08.05
  • Accepted : 2010.12.15
  • Published : 2011.04.25
Download PDF
⟨ Previous Next ⟩

Abstract

Metal waste generated from the pyroprocessing of 10 MtU of spent fuel was classified by comparing the specific activity of a relevant radionuclide with the limit value of the specific activity specified in the Korean acceptance criteria for a lowand intermediate-level waste repository. A Korean Optimized Fuel Assembly design with a 17${\times}$17 array, an initial enrichment of 4.5 weight-percent, discharge burn-up of 55 GWD/MtU, and a 10-year cooling time was considered. Initially, the mass and volume of each structural component of the assembly were calculated in detail, and a source term analysis was subsequently performed using ORIGEN-S for these components. An activation cross-section library generated by the KENO-VI/ORIGEN-S module was utilized for top-end and bottom-end pieces. As a result, an Inconel grid plate, a SUS plenum spring, a SUS guide tube subpart, SUS top-end and bottom-end pieces, and an Inconel top-end leaf spring were determined to be unacceptable for the Gyeongju low- and intermediate-level waste repository, as these waste products exceeded the acceptance criteria. In contrast, a Zircaloy grid plate and guide tube can be placed in the Gyeongju repository. Non-contaminated Zircaloy cladding occupying 76% of the metal waste was found to have a lower level of specific activity than the limit value. However, Zircaloy cladding contaminated by fission products and actinides during the decladding process of pyroprocessing was revealed to have 52 and 2 times higher specific activity levels than the limit values for alpha and $^{90}Sr$, respectively. Finally, it was found that 88.7% of the metal waste from the 17${\times}$17 Korean Optimized Fuel Assembly design should be disposed of in a deep geological repository. Therefore, it can be summarized that separation technology with a higher decontamination factor for transuranics and strontium should be developed for the efficient management of metal waste resulting from pyroprocessing.

Keywords

References

  1. KINS, 2010 White Paper on Nuclear Safety, Korea Institute of Nuclear Safety, South Korea, 2010, p.236, (2010)
  2. K. J. Lee, et al., “Study on Public Engagement for Spent Fuel Management – Selection of Object and Strategy,” Korean Radioactive Waste Society, (2005).
  3. Y. S. Hwang, et al., “Study on Public and Stakeholder Engagement Process for Spent Nuclear Fuel Management,” KAERI/RR-2845/2007, Korea Atomic Energy Research Institute, Yusong, Daejeon, (2007).
  4. The 3rd Comprehensive Nuclear Energy Promotion Plan, 254th meeting on Atomic Energy Commission, (2007).
  5. W. I. Ko, “Nuclear Fuel Cycle System Analysis (II),” KAERI/TR--3413/2007, Korea Atomic Energy Research Institute, Yusong, Daejeon, (2007).
  6. MKE Notice 2008-227, Cost Calculation Standard for Spent Fuel Management and Radwaste Management, Ministry of Knowledge Economy, (2008)
  7. G. Croff., “A User’s Manual for the ORIGEN2 Computer Code,” ORNL/TM-7175, Oak Ridge National Laboratory Report, (1980).
  8. http://www.matweb.com/
  9. D. F. Hollenbach, L. M. Petrie, S. Goluoglu, N. F. Landers, and M. E. Dunn, “KENO-VI: A General Quadratic Version of the KENO Program,” ORNL/TM-2005/39, Oak Ridge National Laboratory, Version 6, Vol. II, Sect. F17, (2009).
  10. I. C. Gauld, O. W. Hermann, and R. M. Westfall, “ORIGENS: SCALE System Module to Calculate Fuel Depletion, Actinide Transmutation, Fission Product Buildup and Decay, and Associated Radiation Source Terms,” ORNL/TM-2005/39, Oak Ridge National Laboratory, Version 6, Vol. II, Sect. F7, (2009).
  11. KAERI, Material Flow Sheet, Version 2.6.0, Korea Atomic Energy Research Institute, June 11, 2009, (2009).
  12. MEST Notice 2009-37, Technical Standard for Radiation Protection, Ministry of Education, Science and Technology, (2009).
  13. MEST Notice 2009-37, Acceptance Criteria for Low- and Intermediate-level Waste, Ministry of Education, Science and Technology, (2009).

Cited by

  1. Effect of burn-up on the radioactivation behavior of cladding hull materials studied using the ORIGEN-S code vol.298, pp.3, 2013, https://doi.org/10.1007/s10967-013-2543-6