• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.8
• /
• pp.737-744
• /
• 2017

A new ultralow density material (ULDM) named Shellular was recently introduced. Shellular has a periodic cellular structure with smooth-curved shells. The template for the first Shellular was fabricated using lithography and its shape was similar to the P-surface, a type of triply periodic minimal surface (TPMS). In this paper, a new fabrication method of Shellular with D-surface, named W-Shellular, is described. W-Shellular is fabricated based on weaving of polymer wires. The compressive properties are evaluated by experiments and analysis in comparison with the previous ULDMs.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.535-539
• /
• 2001

In these days. the finite element method(FEM) is a very common method for not only a simple vibration analysis but also the optimization of structures. Since the finite element model may contain thousands of degree of freedom, the eigensolutions require extreme computing power, which will result in a serious time-consuming problem. Thus, many researchers have challenged to find more improved modeling techniques and calculating methods to overcome such problems. The Guyan reduction method and the substructure synthesis method are typical examples of such methods. Of the substructure synthesis method, the component mode synthesis method (CMS) is widely used for dynamic analysis of structure. In this study. for the efficient analysis of jet loom structure. Component Mode Synthesis was carried out. The results of the finite element program developed are compared with those of the commercial package program ANSYS for the validation of the program. The results obtained by the program showed a good agreement with those of ANSYS. The program will be further refined and verified by test to yield more accurate results.

• Composites Research
• /
• v.35 no.4
• /
• pp.269-276
• /
• 2022

In this paper, a composite stiffened panel was fabricated using a three-dimensional weaving method that can reduce the risk of delamination, and mechanical properties such as buckling load and natural frequency were investigated. The preform of the stringer and skin of the stiffened panel were fabricated in one piece using T800 grade carbon fiber and then, resin (EP2400) was injected into the preform. The compression test and natural frequency measurement were performed for the stiffened panel, and the results were compared with the finite element analyses. In order to compare the performance of 3D weaving structures, the stiffened panels with the same configuration were fabricated using UD and 2D plain weave (fabric) prepregs. Compared to the tested buckling load of the 3D woven panel, the buckling loads of the stiffened panels of UD prepreg and 2D plain weave exhibited +20% and -3% differences, respectively. From this study, it was confirmed that the buckling load of the stiffened panel manufactured by 3D weaving method was lower than that of the UD prepreg panel, but showed a slightly higher value than that of the 2D plain weave panel.

• Conservation Science in Museum
• /
• v.18
• /
• pp.35-50
• /
• 2017

As part of the NMK's research project on wooden Buddha statues, four items which contained fabric among their bokjang objects(腹藏物) were investigated. Firstly, when classified by the method of weaving, two items made of ra (羅, a four-end complex gauze) silk and five of neung(綾, twill damask) silk from the Goryeo era were identified, and the satin fabrics showing characteristics of the Joseon period were classified as either dan(緞, satin damask) or sa(紗, simple gauze). In particular, the fabric of the bokjang objects enshrined within the gilt-bronze Avalokiteshvara Bodhisattva(Deoksu 801) feature both early and late Joseon characteristics, suggesting that two enshrinements were performed(once in the fifteenth century and another in the seventeenth). Secondly, the patterns on the fabrics included flowers, treasures, fruits, plants with animals, and landscapes with clouds. Thirdly, patches of fabric were found that are assumed to be related with all cardinal directions according to their arrangement, albeit in small quantities.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.6
• /
• pp.65-74
• /
• 2004

The inherent strain method is known to be very efficient in predicting the deformation of steel plate by line heating. However, in the actual line heating process in shipyard, the rapid quenching changes the phase of steel. In this study, In order to consider additional effects under phase transformation, inherent strain regions were assumed to expand. Also, when calculating inherent strain, material properties of steel in heating and cooling are applied differently considering phase transformation. In this process, a new method which can reflect thermal volume expansion of martensite is suggested.8y the suggested method, it was possible to predict the plate deformations by line heating more precisely.

• 연구논문집
• /
• s.28
• /
• pp.89-100
• /
• 1998

This paper deals with the design and analysis of a beating cam. The beating device of a high speed rapier loom, weaving fabric by completion of warp-weft patterns, is driven by double cam type on the same axis. As the double cam, coupled with two cams, performs the mutual conjugate motion, the double cam must be very preciously designed for smooth. For the shape design of a double cam, an instant velocity center method is proposed. This method can determine the cam profile from the contact conditions of the cam and roller follower and the velocity relationships at the instant velocity center. And the practical applicability was verified by developing “DISKCAM of a CAD program. As the results in this paper, the shapes of two cams, which are in the conjugate motion, are designed by instant velocity center method. We applied 8-order polynominals for the beating as displace¬ment curves for shape determination of double cams. The data of displacement, velocity, and acceleration of beating cam can be used adjust in accurate operation and to develope an advanced beating device.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.167-172
• /
• 2004

A method for the design of a disk cam with a remote follower is presented. ADAMS software is utilized for the design process. The whole process is applied for the design of a cam profile to be used in a tappet shedding device of a shuttle loom. First the desired motion of the remote follower, the hearld frame in this case, is determined to improve the characteristic of a certain weaving process. Next, the desired displacement data is input to the ADAMS software and the cam profile is obtained as an output. To test the validity of the proposed method, designed cams were actually manufactured and implemented on a experimental loom. And with the help of potentiometer type displacement transducers, the motion of the remote followers were actually recorded. And the result was sufficient to prove the validity of the presented method.

• Science of Emotion and Sensibility
• /
• v.16 no.4
• /
• pp.517-526
• /
• 2013

This paper reports on flexible plastic optical fiber (POF) fabric displays which are used to develop light-emitting clothing from photonic fabric. We first evaluated the luminescence value corresponding to different methods of processing flexible optical fibers, types of reflective fabric structure, and colors of the light. Moreover, we tried to identify the optimum conditions of the flexible POF fabric displays to realize high luminescence value. The processing methods that were compared were the "Pre-etching" method and the "Post-etching" method. On the basis of the reflective structure of the fabric, the fabrics were categorized as the "White fabric" and the "Reflective fabric." Analysis results showed that the effect of the processing method is more dominant than that of the types of reflective fabric structure. Further, the capability of the Post-etching method to increase luminescence value is slightly higher than that of the Pre-etching method. Further, the 'Reflective fabric' is slightly more efficacious as the base fabric to increase the luminescence value, than the White fabric is. Thus, optimum increase in luminance can be realized by employing the Post-etching method and the Reflective fabric as the base fabric.

• Journal of Welding and Joining
• /
• v.32 no.1
• /
• pp.47-52
• /
• 2014

Due to of high intensity, lower noise and easy controllability of the heat, induction heating system became well known. Induction heating method has been suggested as substitute for the gas heat source and adopted in the automation of curved hull forming system. In this study, an investigation was accomplished to find the effects on the change of material properties when the induction heating was applied on the mild steel plate. Plates were heated using weaving method to get sufficiently heat affected zone and then cooled with water or in the air. The mechanical properties of the heated plate were evaluated. As results, the tensile test, impact test and microstructures satisfied the class rule.

• Journal of the Korean Society of Costume
• /
• v.54 no.8
• /
• pp.113-128
• /
• 2004

This study examined textiles used for ancient costumes of the $16{\cdot}17th$ century in Joseon period, focusing on fabric types and patterns of the costumes from tombs. The purpose of this study was focused on investigating the relationship between fabrics and social backgrounds, especially change in using fabrics through the war from Hidyoshi's Invasion of Korea in 1592. Since the war must have had an effect on the life of people's. The result of the study is that silk occupies $69{\%}$ of all textiles, and cotton, linen follow The weaving method of silk was primarily Plain and satin weaves. However the use of twill, gauze, and double weave, that had led weaving methods of silk during the Koryo Period, were considerably decreased in Joseon Period. Types excavated fabrics in the $16{\cdot}17th$ century Joseon period can be said various. Of this, silk was the most remarkable one till Hidyoshi's Invasion of Korea in 1592, when the ratio of patterned silk dramatically decreased. Contrarily, the ratio of cotton and plain fabric increased rapidly in Hidyoshi's Invasion of Korea in 1592. It is supposed that the result is largely due to unusual condition of the war time. After the war, it is estimated that use of pattened fabric as well as silk was decreased. Patterns of textile fabrics in $16{\cdot}17th$ century were various. In result of surveying a trend of increment and decrement, it is known that the ratio of patterned textile fabrics decreased dramatically in Hidyoshi's Invasion of Korea in 1592 and Manchu war of 1636. Tendency of textile use by social Position is more notable. It is appeared that a lot of silk fabrics were used in High hierarchy. The excavated remain and ratio of silk were the highest in Kyonggi Province including Seoul.