• The Research Journal of the Costume Culture
• /
• v.8 no.2
• /
• pp.272-281
• /
• 2000

The purpose of this study is to provide for the basic data useful to the effective production. For this purpose, 180 Korean mothers who bring up from newborns to four-year-old babies were sampled to survey the problems on size occurred by wearing and purchasing the Infants'Wear and positively identify the factors affecting the fitness. Data is processed by a computer(SAS) and analyzed by using frequency, perentage, mean, χ²-test, Duncan-test. The main results of this study are as follows ; 1. Consumers'awareness of sizing system of Infant's wear tent to present relatively high and tend to purchase their infants'wear larger than actual sizes or that consumers'preferences depend little on size adaptation. 2. As a result of analyzing the part not fit, neck circumference, waist circumference, total length, neck back-waist length is short, sleeve length, pants length, shoulder length is big. In all, it has been found through this study that fitness and awareness of sizing system of Infant's Wear in purchasing infants'wear was influenced by many external factors. Therefore, in order to maximize the size adaptability for infants, Infants'Wear must be present the reasonable sizes and specifications for infants'wear in consideration of domestic and foreign specifications and infants'health condition.

• Journal of the korean Society of Automotive Engineers
• /
• v.9 no.5
• /
• pp.49-56
• /
• 1987

This paper is a study on the effect of the cutting speed on the tool wear in turning of the glass fiber reinforced plastics. The wear behavior of cutting tool is studied by means of turning, changing the cutting speed and feed in the wide range. Moreover, the theoretical model applicable to the cutting speed of wide range is analysed. The main results obtained are as follows: The relation between the tool wear and the cutting speed is divided into three range in case of the constant cutting distance. 1) At the low cutting speed, the tool wear is independent of the cutting speed, but dependent mainly on the contact length between tool and glass fiber(lst range). 2) At the high cutting speed, the tool wear is independent of the contact length, and dependent on the cutting speed only(2nd range). The tool wear increases in proportion to the cutting speed. 3) At the higher cutting speed than the speed in the 2nd range, the tool wear is independent both of the cutting speed and the contact length(3rd range). 4) In the 3rd range, tool flank wear is constant and is observed that only the wear of cutting edge increases.

• Korean Journal of Human Ecology
• /
• v.8 no.1
• /
• pp.211-217
• /
• 1999

To investigate the fitting and its problems related in clothing fit and to get basic data to develop fitted ready-to-wear garment, total 238 subjects were surveyed during the period of May, 1997 in Taejon. The major results were as follows; 1. The results showed that most subjects had purchased ready-to-wear garments in a department store. 2. The fit of ready-to-wear garments is more suitable in the upper wear such as T-shirts and blouse than in lower wear such as skirts and pants. 3. Fitting problems in ready-to-wear garments were identified, including sleeve length, shoulder area. 4. A variety of fitting problems in ready-to-wear garments were showed waistline, thigh girth, sleeve length. 5. There were significant differences between the demographic variables, i.e. marital status and occupation and clothing problems.

• Tribology and Lubricants
• /
• v.15 no.1
• /
• pp.46-51
• /
• 1999

An analytical model about lateral crack occurring in abrasive wear of brittle solids is developed. Stress field around the lateral crack and stress intensity factor at the crack tip are analytically modeled. Abrasive wear by abrasive particle is experimentally studied. In soda-lime glass, it is observed that chipping by lateral crack occurs and produces the greatest material removal when normal load applied by the abrasive particle is about 1.5∼3.0 N. The prediction of lateral crack length from the model is compared with the experimentally measured length in soda-lime glass.

• Journal of the Korean Society of Costume
• /
• v.52 no.8
• /
• pp.29-39
• /
• 2002

It was increased leisure hours by automation and computerization of industry. Many people spend on hours in enjoying leisure sports, and then. nowadays, Many women tend to prefer casual wear to formal suits. The purpose of this research was to design of outdoor-wear that improve the functional and aesthetic effects for clothing comfort. Total 4 design prototype consisting of jumper and slacks were developed for this research. Outdoor-wear design forced on armhole type of jumper and ease of the back crotch length of slacks to improve the functional and aesthetic effects. And Outdoor-wear design focused on color harmony to aesthetic effects. Ease amount and materials of jumper and slacks were controlled. Design A: Jumper was designed as dropped shoulder with set-in steeve and band collar, A break-away zipper to facilitate ventilation control were made the area of back of jumper and the area of outside seam line of slacks Color of jumper and slacks were olive green color. Ease amount of the crotch length of slacks pattern was constructed as 7% of total crotch length: Design B 4DM cut pattern were applied to the jumper and slacks pattern. A break-away zipper to facilitate ventilation control were made the area of back of jumper and the area of inside seam line of thigh. Color of jumper and slacks were grey and orange color. Ease amount of the crotch length of slacks pattern was constructed as 5% of total crotch length. Design C : Jumper was designed as the set in sleeve and hood. and A break- away zipper to facilitate ventilation control were made the ares of the armhole and elbow. Color of jumper and slacks were ivory and orange color. Ease amount of the crotch length of slacks pattern was constructed as 5% of total crotch length. Design D : Jumper was designed as raglan sleeve. Color of jumper and slacks were olive green color. Ease amount of the crotch length of slacks pattern was constructed as 5% of total crotch length. Total six females, ages 20-45, served as subjects for this research. Subjects have standard body type, generally, wearing 66 size of ready-to-wear clothing. The performance of the newly designed outdoor-wear was evaluated for their effectiveness in several aspects such as conditions of skin temperature, sensory evaluation of comfort during body movements, appearance and color harmony and aesthetic collar design. Design 3 was appeared to be the most positive in aesthetic evaluation and functional effects of design 2 of 4DM cut pattern was appeared to be beter than other designs.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.06a
• /
• pp.310-316
• /
• 1999

The fretting wear characteristics of the contact between Zircaloy-4 tube and Inconel 600 tube have investigated. Zircaloy-4 is used for fuel rod in nuclear reactor and Inconel 600 is used for tube In steam generator of nuclear power plant. A fretting wear tester was designed to be suitable for this fretting test. In this study, the number of cycles, slip amplitude and normal load were selected as main factors of fretting wear. This study shows that the wear scar length of Zircaloy-4 and Inconel 600 increases as number of cycles, normal load and slip amplitude increase and the wear scar length of Zircaloy-4 is more longer than that of Inconel 600 due to the surface hardness.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.4
• /
• pp.28-38
• /
• 1995

The flank wear at the minor cutting edge significantly affects the geometric accuracy and surface roughness in finish machining. A fuzzy estimator based on a fuzzy inference algorithm with a max-min composition rule is introduced to evaluate the minor flank wear length. The features sensitive to minor flank wear are extracted from the dispersion analysis of a time series AR model of the feed directional acceleration signal. These features, dispersions, are used for constructing linguistic rules, and then the fuzzy inferences are carried out with test data sets collected under various cutting conditions. The proposed system turns out to be effective for estimating minor flank wear length.

• International Journal of Human Ecology
• /
• v.2 no.1
• /
• pp.95-110
• /
• 2001

The purpose of this research is to analyze how appropriately the sizing of domestically produced children's wear compares to children's sizes; it is based on an anthropometric survey conducted in 1998. By discovering and understanding discrepancies between the sizing system of children s wear and the real size of children, this study aims to suggest solutions that will lead to increased comfort and more suitable fitting in children's clothes. This research analyzes and compares 'the extent of growth between age groups' with 'the difference in sizing system in use by manufacturers'. The study focused on aged 4 to 12 children, who are usually divided in two groups; primary students and toddlers. In total, seven sizes were selected: bust, waist, and hip (which are girth sizes), and height, back neck to waist (top length), sleeve length, and waist to ankle (slacks length) as representing length. The results of this research are analyzed by basing on the actual increments between the sizes of children's wear in certain basic items rather than sizes themselves because each size quite differed according to companies, items and designs. Significantly, the increase in the sizing was not as great as the average biennial growth rate of children. The consequences are poorer fit and unsuitable representative value for each age group because the actual sizes of children increasingly differ from the sample size. Observing the increments in several sizes, we found that 81.8% of the companies used the certain and equal increases for grading sizes in sleeve length, waist, and bust. In addition, 72.7% of the companies adopted the same increments between sizes in height and hip girth, and 63.6% also chose equal increments in T-shirt length for making smaller or bigger sizes from the sample size. However, sleeve length and pant length were the components that displayed the most varied sizing. Interestingly, the few companies that used different increments between size groups, adopted the change only between one or two size groups, instead of all sizes. In conclusion, this research reveals the unsuitability of the current sizing system and the necessity to increase consumer confidence in the size tags on children's wear by modifying the system to reflect the actual growth of children. The results can also contribute to future study on the development of a new and more accurate sizing system for children's wear.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.5
• /
• pp.1055-1062
• /
• 1988

The characteristics of tool wear and the machinability in cutting of GFRP have been studied. The wear behavior of carbide insert tools(P20, M10, K10) and Cermet in TiC grade was studied by turning of changing the cutting condition. Machinability could be estimated as the following empirical formula, CT$^{n}$ =W The main results obtained are as follows: (1) Dependence of rate of tool wear on cutting speed; with increases of cutting speed, the rate of tool wear initially increases gradually(1st range), then it increases proportionally to cutting speed(2nd range), and finally the rate is constant(3rd range). (2) When the contact length has a main, effect on tool wear, the cutting speed does nit affect the tool wear. On the contrary, the cutting speed has a main effect on tool wear, the contact length does not affect the tool wear. (3) The order of machinability is K10, M10, P20 and Cermet in TiC grade.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.4 s.152
• /
• pp.582-594
• /
• 2006

The purpose of this study were to develop snow-board lower wear with improved functionality. The study consisted of figure out appropriate ease amount of snow-board lower wear and make products by applying it to pattern design. The results of this study were as follows: On the basis of the analysis of snow-board lower wear on market, 2 pieces of experimental snowboard lower wear were designed, produced, and evaluated the patterns of with different ease, and snowboard lower B for experiment was proved to be better. Snowboard lower wear was produced and evaluated for experiment 2 by giving additional ease to specific parts. Therefore experiment 2 was presented pattern, ease, and size of snowboard lower wear with improved functionality. Sizes and ease of snow-board lower wear for presentation. waist circumference - 96.0cm(l6.4cm, 17.1%); hip circumference - 127.0cm(31.3cm, 24.4%); pants length - 112.0cm(9.6cm, 8.6%); crotch length - 90.0cm(26.8cm, 36.4%); thigh circumference - 78.0cm(23.4cm, 30.0%); knee circumference - 62.0cm(24.7cm, 39.8%); turnup circumference - 62.0cm(36.0cm, 58.1%). Above mentioned sizes and ease of lower wear are medium size(M) for male.