• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.1
• /
• pp.43-49
• /
• 2008

This study is about an influence of harmful factors of welding fumes such as Fe, Mn, Cu, Zn to workers who inhales them in welding sites. The influence can be measured with the density of heavy metals in blood after welding. The main factors of the measurement are TWA, a density of welding fume, and a level of heavy metals. The results indicate that there is a positive effect of moving fans as a way of improving the condition in welding workplaces. While welding was done, TWA exceeded the level of Fe 40% and Zn 10% and the level of heavy metals in blood was below the standard for the workers who were under the experiment. Also when the wind was applied on the front side by a fan, the welding fume significantly reduced. It can be concluded that wearing protection gears with safety devices is one of important factors.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.1
• /
• pp.90-100
• /
• 2013

Deck-plates are widely used on construction sites, and have the advantage of enabling contractors to achieve a relatively uniform quality. But nevertheless, quality deviation in deck-plate construction can occur as the result of differences in site conditions and the experience of crew workers. In this study, the authors present a site quality evaluation prototype for building deck-plate construction. Through analyses of case studies and interviews with experts, standard quality check sheets and a quality management index were developed by estimating the importance of quality check items based on a Failure Mode and Effects Analysis (FMEA) method. The applicability and effectiveness of the prototype was evaluated through a case study and interviews with case participants. It was found that the prototype promoted an active quality management as a way of continuously improving quality management in deck-plate construction instead of passive quality inspection practice.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.4
• /
• pp.474-483
• /
• 1996

In this paper, as a part of the method improving stability, the load-flow calculation in D.C. power system and the models for stability analysis are studied with A.C-D.C. interconnected power systems transmission performed. Moreover, the theory is established in relation to each control method of D.C. power systems. Then the stability of A.C-D.C.interconnected power systems is compared and considered by the way of dividing the operating control method of the rectifier inverter converter into ACR-AVR, APR-A.gamma.R, A.alpha.R-ACR. The dynamics characteristic of terminal voltage, frequency, active-reactive power and rotor angle of the generator with disturbances and load fluctuations is considered. In addition, the characteristic of direct voltage, direct current, power and control systems. From this the comparative analysis of the direct current control method, the possibility of the stability analysis of A.C.-D.C. interconnected power system is considered. (author). refs., figs., tabs.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1913-1920
• /
• 2017

Software Defined Networking creates totally new concept of networking and its applications which is based on separating the application and control layer from the networking infrastructure as a result it yields new opportunities in improving the network security and making it more automated in robust way, one of these applications is Denial of Service attack mitigation but due to the dynamic nature of Denial of Service attack it would require dynamic response which can mitigate the attack with the minimum false positive. In this paper we will propose a new mitigation Framework for DDoS attacks using Software Defined Networking technology to protect online services e.g. websites, DNS and email services against DoS and DDoS attacks.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.3
• /
• pp.167-171
• /
• 2016

PURPOSE. This study inspects the effect of incorporating halloysite nanotubes (HNTs) into polymethyl methacrylate (PMMA) resin on its flexural strength, hardness, and Young's modulus. MATERIALS AND METHODS. Four groups of acrylic resin powder were prepared. One group without HNTs was used as a control group and the other three groups contained 0.3, 0.6 and 0.9 wt% HNTs. For each one, flexural strength, Young's modulus and hardness values were measured. One-way ANOVA and Tukey's test were used for comparison (P<.05). RESULTS. At lower concentration (0.3 wt%) of HNT, there was a significant increase of hardness values but no significant increase in both flexural strength and Young's modulus values of PMMA resin. In contrast, at higher concentration (0.6 and 0.9 wt%), there was a significant decrease in hardness values but no significant decrease in flexural strength and Young's modulus values compared to those of the control group. CONCLUSION. Addition of lower concentration of halloysite nanotubes to denture base materials could improve some of their mechanical properties. Improving the mechanical properties of acrylic resin base material could increase the patient satisfaction.

• Journal of the Korean Data and Information Science Society
• /
• v.19 no.3
• /
• pp.819-830
• /
• 2008

Web recommender system was suggested in order to solve the problem which is cause by overflow of information. Collaborative filtering is the technique which predicts and recommends the suitable goods to the user with collection of preference information based on the history which user was interested in. However, there is a difficulty of recommendation by lack of information of goods which have less popularity. In this paper, it has been researched the way to select the sparsity of goods and the preference in order to solve the problem of recommender system's sparsity which is occurred by lack of information, as well as it has been described the solution which develops the quality of recommender system by selection of customers who were interested in.

• Journal of Ginseng Research
• /
• v.37 no.2
• /
• pp.144-166
• /
• 2013

Actoprotectors are preparations that increase the mental performance and enhance body stability against physical loads without increasing oxygen consumption. Actoprotectors are regarded as a subclass of adaptogens that hold a significant capacity to increase physical performance. The focus of this article is studying adaptogen herbs of genus Panax (P. ginseng in particular) and their capabilities as actoprotectors. Some animal experiments and human studies about actoprotective properties of genus Panax attest that P. ginseng (administered as an extract) significantly increased the physical and intellectual work capacities, and the data provided suggests that ginseng is a natural source of actoprotectors. Preparations of ginseng can be regarded as potential actoprotectors which give way to further research of its influence on physical and mental work capacity, endurance and restoration after exhaustive physical loads while compared with reference actoprotectors.

• Journal of the Korean Home Economics Association
• /
• v.40 no.12
• /
• pp.171-187
• /
• 2002

The purpose of this study ws6 to find out women's informationized conditions and their life changes. The subjects of this research were 482 women living in large and small-medium sized cities. The data analysis used average, pearson's correlation, one-way ANOVA and multiple regression by SAS/PC. The major findings were as follows: 1. Women's level of informationized conditions is under median in computer using and information technology. The effect of informatization is over median about improving the ability, recognizing from family and neighbor, achieving the occupation. The change of individual and family is under median except educational stimulus, life vitality and educational effect on the family. 2. The effect of informatization was influenced by ability of using computer, necessity and purpose of informatization. The change of individual was influenced by ability of using computer, purpose and effect of informatization and also the change of family was influenced by handicapped reason in information education and the effect of informatization.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.5
• /
• pp.343-350
• /
• 2019

Map labels are the most recognizable map elements using the human visual system because they are essentially a natural language. In this study, an experiment was conducted using an eye-tracker to objectively record and analyze the response of subjects regarding visual attention to map labels. A primary building object was identified by analyzing visit counts, average visit duration, fixation counts, and the average fixation duration of a subject's gaze for an area of interest acquired using the eye-tracker. The unmarked rate of map labels in Google map, Naver map, and Daum map was calculated. As a result, this rate exceeded fifty-one percent, with the lowest rate recorded for Google map. It is expected that the results of this study will contribute to an increase in the diversity of research in terms of the spatial cognition approach for map labels, which is more helpful to users than the existing body of work on methods of expression for labels.

• Journal of Industrial Technology
• /
• v.42 no.1
• /
• pp.19-27
• /
• 2022

This review will discuss the effort to understand the interfacial reactions at the anode and cathode sides of all-solid-state batteries. Antiperovskite solid electrolytes have received increasing attention due to their low melting points and anion tunability which allow controlling microstructure and crystallographic structures of this material system. Antiperovskite solid electrolytes pave the way for the understanding relationship between critical current density and mechanical properties of solid electrolytes. Microstructure engineering of cathode materials has been introduced to mitigate the volume change of cathode materials in solid-state batteries. The hollow microstructure coupled with a robust outer oxide layer effectively mitigates both volume change and stress level of cathode materials induced by lithium insertion and extraction, thus improving the structural stability of the cathode and outer oxide layer, which results in stable cycling performance of all-solid-state batteries.