Journal of Advanced Marine Engineering and Technology
/
v.39
no.6
/
pp.662-669
/
2015
There has been an increased interest in the mitigation of wax deposition because wax, which usually accumulates in subsea oil-production systems, interrupts stable oil production and significantly increases the cost. To guarantee a required oil flow by mitigating wax deposition, we need to obtain a reliable estimation of the wax deposition. In this research, we perform simulations to understand the major mechanisms that lead to wax deposition, namely molecular diffusion, shear stripping reduction, and aging. While the model variables (shear reduction multiplier, wax porosity, wax thermal conductivity, and molecular diffusion multiplier) can be measured experimentally, they have high uncertainty. We perform an analysis of these variables and the amount of water and gas in the multiphase flow to determine these effects on the behavior of wax deposition. Based on the results obtained during this study for a higher wax porosity and molecular diffusion multiplier, we were able to confirm the presence of thicker wax deposits. As the shear reduction multiplier decreased, the thickness of the wax deposits increased. As the amount of water increased, there was also an increase in the amount of wax deposits until 40% water cut and decreased. As the amount of gas increased, the amount of wax deposits increased because of the loss of the light hydrocarbon component in the liquid phase. The results of this study can be utilized to estimate the wax deposition behavior by comparing the experiment (or field) and simulation data.
Journal of the Society of Cosmetic Scientists of Korea
/
v.36
no.2
/
pp.99-103
/
2010
Waxes, or long-chain hydrocarbons, may be obtained naturally from animals, vegetables, and mineral waxes, or may be synthesized. The oil-wax gels are widely applied to lots of cosmetics such as lipsticks. For example, the lipstick texture is strongly dependent on the glossiness of the oil-wax gels. Extensive research has been carried out to investigate the lattice structure of wax mixture in pure solvents (hydrocarbons) and defined mixtures. However, only a limited amount of work has been published on the lattice structure of wax matrixes in undefined mixtures. The objective of this study was to investigate the relationship between the lattice structure of ceresin wax and different wax mixtures and the glossiness of oil-wax gels. Recently visual factors such as the glossiness of skin are generally known as the words to express the beauty. The mechanism of glossiness has been suggested to understand the changes that occur in the lattice structure of the wax matrixes when they are forming gels and also the effects of the nature of solvent. The present work investigates the lattice structure of the wax matrixes and glossiness of oil-wax gels obtained from ceresin and microcrystalline wax as well as of the gels formed by different waxes in solvent.
In this study, we showed that WAX9D, a nonspecific lipid-transfer protein found in broccoli, binds palmitate (C16) and stearate (C18) with dissociation constants of 0.56 ${\mu}M$ and 0.52 ${\mu}M$, respectively. WAX9D was fused to thioredoxin protein by genetic manipulation to enhance its solubility. The data revealed strong interaction of Trx-WAX9D with palmitate and stearate. The dissociation constants of Trx-WAX9D for palmitate and stearate were 1.1 ${\mu}M$ and 6.4 ${\mu}M$, respectively. The calculated number of binding sites for palmitate and stearate was 2.5 to 2.7, indicating that Trx-WAX9D can bind three molecules of fatty acids. Additionally, Trx-WAX9D was shown to inhibit the apoptotic effect of palmitate in endothelial cells. Our data using Trx-WAX9D provide insight into the broad spectrum of its biological applications with specific palmitate binding.
Journal of Advanced Marine Engineering and Technology
/
v.38
no.10
/
pp.1333-1339
/
2014
As the demand for petroleum resources increases, and oilfields on lands and in shallow-sea become exhausted, the areas for oil production are expanding to the deep sea and therefore technologies for flow assurance are coming into the highlight. In low temperature environment such as the deep sea, wax is accumulated and prevents stable oil production. Therefore, the development of flow assurance technologies is required. Wax is precipitated in crystalline form when the oil temperature decreases below the wax appearance temperature; it then accumulates on the inner walls of pipelines causing blockages. In particular, in subsea pipelines, which have a large surface contact area with the surrounding seawater, wax deposition problems are frequent. The internal tubular coating can effectively reduce wax deposition without pausing oil production when the coating is appropriately designed. This study carried out wax deposition tests on a number of internal tubular coatings under single flow conditions. The results were analyzed for the effects that the physical properties of the coatings had on wax deposition.
Kim, Bokhee;Kim, Dong-Man;Lee, Sang-Hwa;Shin, Hyun-Jae
KSBB Journal
/
v.27
no.5
/
pp.319-323
/
2012
Vitamin C or L-ascorbic acid, an essential nutrient for humans with antioxidative property, was coated with natural wax to be used as functional additives for cosmetics. Coating of vitamin C was performed using carnauba wax and olive wax in self-designed reaction chamber for 60 min. The yield of coated vitamin C with carnawuba wax and olive wax were up to $94.6{\pm}1.2%$ and $82.5{\pm}1.4%$, respectively. The stability of the carnauba wax-coated vitamin C in the lotion was improved 17.8% than that of uncoated vitamin C during 30 day storage at $25^{\circ}C$. Color and the layer separation of the lotion added with the coated vitamin C showed better property than with the uncoated vitamin C. The coated vitamin C can be applied to cosmetic ingredients as a stable additive.
Transactions of the Korean Society of Automotive Engineers
/
v.10
no.6
/
pp.142-149
/
2002
The frictional properties of nylon can be improved by the impregnation of lubricants like wax, oil or graphite. The inclusion of these lubricants, on the other hand, decreases the mechanical properties of nylon, such as tensile strength, hardness and impact strength. As an attempt to maximize frictional properties, while minimizing a decrease in the mechanical properties, various kinds of nylon containing 3 wt% wax and varying contents of oil or graphite were prepared. It was found that the synergy effects to improve both friction and anti-wear properties is evidenced by impregnating a combination of wax/oil or wax/graphite. The wear rate of a nylon containing 3 wt% of wax and 1.5 wt% of oil turned out to be 1/4 of that of nylon impregnated with 8 wt% wax or 8 wt% oil. The latter showed the lowest wear rate among the nylons prepared with a single lubricant. In addition, the friction coefficient of the developed nylon was found to be very similar to the nylon with 8 wt% wax only.
Kim, Yong-Ki;Kim, Dong-Joo;Umarov, Alisher;Kim, Kyoung-Jin;Park, Jun-Young
Journal of the Korean Society of Manufacturing Process Engineers
/
v.10
no.6
/
pp.146-151
/
2011
Wax spin coating is a part of several wafer handling processes in the silicon wafer polishing station. It is important to ensure the wax layer free of contamination to achieve the high degree of planarization on wafers after wafer polishing. Three-dimensional air flow characteristics in a wax spin coater are numerically investigated using computational fluid dynamics techniques. When the bottom of the wax spin coater is closed, there exists a significant recirculation zone over the rotating ceramic block. This recirculation zone can be the source of wax layer contamination at any rotational speed and should be avoided to maintain high wafer polishing quality. Thus, four air suction ducts are installed at the bottom of the wax spin coater in order to control the air flow pattern over the ceramic block. Present computational results show that the air suction from the bottom is quite an effective method to remove or minimize the recirculation zone over the ceramic block and the wax coating layer.
Protease activity in matured wax gourd sarcocarp was 0.19unit/0.5ml, immatured wax gourd sarcocarp 0.56unit, and matured wax gourd 24.35 unit, immatured wax gourd core 0.35unit. Protease activity in matured wax gourd sarcocarp to raw meat or raw pork was 13,0 unit, 7.4 unit, respectively, and that in wax gourd core to raw beef was 30.2 unit, and raw pork was 24.5 unit. Thermal stability of pretense in matured wax gourd sarcocarp was stable below 70$\^{C}$ when it was heated for 10 minutes. In case of 80$\^{C}$, the remaining activity was 21%, and at 90$\^{C}$, it was lost entirely. The absorption spectrum showed peak at 280nm. According to the HPLC analysis, casein was hydrolyzed into small size by protease in core or sarcocarp of matured was gourd and immatured wax gourd. Wax gourd diluted by 1/10 showed two peaks, one was from casein being hydrolyzed, and the other was from the increased molecular weight with coagulated casein. On the other hand, the molecular weight didin't increase in immatured wax gourd core diluted by 1/10. The result of dilution of 1/10 showed different pattern from undiluted one, but the peak of sarcocarp in matured wax gourd was 1 and the peak of core in immatured wax gourd was 5, and those of core and sarcocarp of immatured wax gourd were 3 respectively.
This study was designed to investigate the hypoglycemic effects of Benincasa hispida (Wax gourd) in streptozotocin (STZ)-induced diabetic rats. Diabetes was induced in the male rats by intravenous injection of STZ at a dose of 45 mg/kg dissolved in citrate buffer. The diabetic animals then had plasma glucose concentration of above 300mg/dl. The experimental groups were divided into five groups; normal, STZ-control and three Wax gourd groups (5%, 10% and 20% intake groups). Normal and STZ-control groups were fed on a AIN-93 diet and experimental groups were fed a AIN-93 diet with the Wax gourd powder (5%, 10% and 20%/kg diet) for 4 weeks. The body weight, diet intake and feed efficiency ratio (FER) were monitored. The blood glucose and cholesterol levels were determined everyweek. After 4 weeks, the rats were sacrificed and the levels of glucose, insulin, cholesterol, HDL-cholesterol, triglyceride and free fatty acids in plasma and levels of glycogen in liver and muscle were analyzed. Diabetic rats showed the lower weight gain compared to the normal rats. The weight gain and feed efficiency ratios in 15 and 20% Wax gourd groups were higher than in STZ-control group. The plasma glucose levels were significantly lower in all Wax gourd groups than in STZ-control group. The plasma insulin levels in diabetic groups were not significantly different compared to the normal group, but the level of 20% Wax gourd group was higher than other diabetic groups. The experimental diabetic groups showed the higher levels of muscle glycogen compared to STZ-control group. The lower levels of plasma cholesterol were noticed in 20% Wax gourd group throughout the experimental period. The plasma level of triglyceride was elevated in STZ-diabetic control and the levels were slightly decreased in Wax gourd groups. Rats of 10% Wax gourd group showed the lower levels of plasma free fatty acids. It is suggested, from the results, that the possibility of therapeutic or preventive use of wax gourd to the diabetes mellitus.
This study obtained the following consequences, as a result of the comparative analysis for the castability depending on an angle of the sprue and wax pattern in case of manufacturing dental prostheses, for the castability depending on direction, and for the castablility of sprue, which attached the reserve to each different 3.5mm roll wax(sprue wax) and to 2.5mm sprue wax. 1. As a result of the comparative analysis for the castability depending on an angle of the sprue and wax pattern, the best castability was shown when the angle of the sprue and wax pattern is 180$^{\circ}\Delta$(straight line), and the lowest castability was shown in 45$^{\circ}\Delta$, which was curved most, and there was no statistical significance. 2. As a result of the comparative analysis for the castability of an angle depending on direction, the best castability was shown in the farthest side from the direction of centrifugal casting, and the lowest castability was shown in the same side as the direction of centrifugal casting, and there was no statistical significance. 3. Given comparing the castability depending on the pattern of sprue, the better castability was shown in 135$^{\circ}\Delta$ and 180$^{\circ}\Delta$ when using 3.5mm roll wax(sprue wax), compared to attaching the reserve to 2.5mm sprue wax.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.