• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.6
• /
• pp.761-767
• /
• 1998

The Perfectly Matched Layer(PML) provide good performance in absorption over a wide frequency range and is an appropriate ABC for waveguides with high dispersion. In this paper, a novel algorithm is proposed to improve the computational efficiency of the PML. In the input and output ports, the fields are decomposed into a series of modes, and then an appropriate ABC is applied to each mode. CPU time and memory storage requirements are greatly reduced, since the computational region is analyzed in one dimension. A WG-90 rectangular waveguide with a thick asymmetric iris is analyzed by Finite-Difference Time-Domain(FDTD) simulations with the conventional PML and the proposed one-dimensional (1-D) PML. Numerical results show that the computational efficiency is significantly improved by the proposed method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.247-250
• /
• 2001

We studied optical properties of SiON thin-film in the applications of optical waveguide. SiON thin-film was grown in $300^{\circ}C$ by PECVD(plasma enhanced chemical vapor deposition) system. The change of SiON thin-film composition and refractive Index was studied as a function of varying $NH_3$ gas flow rate. As $NH_3$ gas flow rate was increased, Quantity of N and refractive index were increased at the same time. By the results, we could form the SiON thin-film to use of a waveguide with refractive index of 1.6. We analyzed the conditions of the thin-film with FTIR(fourier transform infrared) and OES (optical emission spectroscopy). N-H bonding($3390cm^{-1}$ ) can be removed by thermal annealing. And we could observe the SiH bonding state and quantity by OES analysis in $SiH_4$

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.8
• /
• pp.698-706
• /
• 2013

Structural vibration induced by excitation forces under turbulent boundary layer is investigated in terms of the numerical analysis in this paper. Since the responses of structures excited by the wall pressure fluctuation(WPF) are described by the power spectral density functions, they are calculated and reviewed theoretically for finite and infinite length beams. For the use of numerical approaches, the WPF needs to be discretized but conventional finite element method is not much effective for that purpose because the WPF lose the spatial correlation characteristics. As an alternative numerical technique for WPF modelling, a wavenumber domain finite element approach, called waveguide finite element method, is examined here for infinite length beams. From the comparison between the numerical and theoretical results, it was confirmed that the WFE method can effectively and easily cope with the excitation from WPF and hence the suitable approach.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.12
• /
• pp.1321-1328
• /
• 2003

In this paper, we demonstrate that the directivity of the CPW(Coplanar Waveguide) directional coupler with finite-extent backed conductor is enhanced by eliminating center region of backed conductor appropriately. If the backed conductor is removed at center region of couplers, the couplers have two backed conductors. If effective odd mode dielectric constant is decreased at center region, the electrical length for odd mode is changed and phase velocity is same at the directional couplers. Hence, directivity is improved. The eliminated length is solved by an odd and even mode analysis. The designed moderate CPW directional coupler with the proposed compensation structure has excellent directivity and matching characteristic at center frequency in simulation and measurement.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.4
• /
• pp.317-324
• /
• 2004

Electromagnetically coupled coaxial dipole (ECCD) array antenna with and without short-ended termination is investigated theoretically. The integral equations are derived for the structure by use of the Fourier transform and mode expansion of radial waveguide. The integrals appearing in the integral equations are evaluated along the branch cut instead of real axis for a faster convergent integral. The effects of slots and dipoles, short-ended termination length, and dielectric coating on the radiation characteristics are presented. Radiation pattern of the structure is also investigated. The results of the present method are compared with those of the commercial EM simulator and good agreement is found.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.5
• /
• pp.755-762
• /
• 2000

In this work, we present the resonant frequencies, Qrad, and impedance bandwidth of rectangular dielectric resonator antenna(DRA)for a broad range of aspect ratios using Dielectric Waveguide Model. These presented data are compared with simulation and measurement. The DRA having relative permittivities of 37.84 and 90 have been fed by a coaxial cable and fed using a aperture-coupled method for comparisions. The approximate resonant frequencies are shown to have the prediction error of about 8% and impedance bandwidth is found to have large prediction variation according to feeding method. The data presented in this paper can be used when the aspect ratios of DRA have to be determined for a given resonant frequency and impedance bandwidth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.12
• /
• pp.2819-2827
• /
• 1997

A dielectric waveguide structure using rectangular dielectic strip is analyzed directly in terms of the wave equation for quasi TE and quasi TE and quasiTM modes. This problem can be solved, with no approximation in the wave equation for the electric field $\vec{E}$ and magnetic field $\vec{H}$ inside and outside the dielectric rectangular waveguide matching the boundary conditions between interfaces. This leads to an eigenvalue problem where spurious modes do not appear. Dispersion characeristic examples are presented for square and rectangular waveguides. The formulation is general and can be used for compuarison with ogher methods such as FDM or FEM in various structures.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.425-427
• /
• 1997

Ti:LiNbO$_3$optical waveguides were fabricated as a function of Ti thickness and pigtailed with polarization maintaining fiber(PMF). The near field patterns and total insertion loss of these sample was showed and measured for optical wavelength 1550nm. The fiber-to-waveguide coupling loss was described also .

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.247-250
• /
• 2001

We studied optical properties of SiON thin-film in the applications of optical waveguide. SiON thin-film was grown in 300$^{\circ}C$ by PECVD(plasma enhanced chemical vapor deposition) system. The change of SiON thin-film composition and refractive Index was studied as a function of varying NH$_3$ gas flow rate. As NH$_3$ gas flow rate was increased, Quantity of N and refractive index were increased at the same time. By the results, we could form the SiON thin-film to use of a waveguide with refractive index of 1.6. We analyzed the conditions of the thin-film with FTIR(fourier transform infrared) and OES(optical emission spectroscopy). N-H bonding(3390cm$\^$-1/) can be removed by thermal annealing. And we could observe the SiH bonding state and quantity by OES analysis in SiH$_4$

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.8
• /
• pp.1833-1841
• /
• 1997

Rectangular dielectric waveguides, the most fundamental and indispensible elements in integrated optics, have been investigated by many researchers with various approaching methods including from the relatively approximate techniques to the numerical method. In this paper, the optimum equivalent waveguide model is adopted which is determined by a perturbation feedback process for analyzing the propagation constant by means of computer simulation, we have ascertained that the propagation constant from perturbation feedback method gives the best approximate value because it coincide with more exact value than obtained by other approximating methods. The technique also provides analytical expression for the modal field profile that should be useful in the design of various integrated optical devices.