• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권5호
• /
• pp.499-508
• /
• 2017

This paper uses optimization techniques to obtain bow hull form of a 66,000 DWT bulk carrier in calm water and in waves. Parametric modification functions of SAC and section shape of DLWL are used for hull form variation. Multi-objective functions are applied to minimize the wave-making resistance in calm water and added resistance in regular head wave of ${\lambda}/L=0.5$. WAVIS version 1.3 is used to obtain wave-making resistance. The modified Fujii and Takahashi's formula is applied to obtain the added resistance in short wave. The PSO algorithm is employed for the optimization technique. The resistance and motion characteristics in calm water and regular and irregular head waves of the three hull forms are compared. It has been shown that the optimal brings 13.2% reduction in the wave-making resistance and 13.8% reduction in the added resistance at ${\lambda}/L=0.5$; and the mean added resistance reduces by 9.5% at sea state 5.

• 한국해양공학회지
• /
• 제30권6호
• /
• pp.505-519
• /
• 2016

If the seabed is exposed to high waves for a long period, the pore water pressure may be excessive, making the seabed subject to liquefaction. As the water pressure change due to wave action is transmitted to the pore water pressure of the seabed, a phase difference will occur because of the fluid resistance from water permeability. Thus, the effective stress of the seabed will be decreased. If a composite breakwater or other structure with large wave reflection is installed over the seabed, a partial standing wave field is formed, and thus larger wave loading is directly transmitted to the seabed, which considerably influences its stability. To analyze the 3-D dynamic response characteristics of the seabed around a composite breakwater, this study performed a numerical simulation by applying LES-WASS-3D to directly analyze the wave-structure-soil interaction. First, the waveform around the composite breakwater and the pore water pressure in the seabed and rubble mound were compared and verified using the results of existing experiments. In addition, the characteristics of the wave field were analyzed around the composite breakwater, where there was an opening under different incident wave conditions. To analyze the effect of the changed wave field on the 3-D dynamic response of the seabed, the correlation between the wave height distribution and pore water pressure distribution of the seabed was investigated. Finally, the numerical results for the perpendicular phase difference of the pore water pressure were aggregated to understand the characteristics of the 3-D dynamic response of the seabed around the composite breakwater in relation to the water-structure-soil interaction.

• 대한조선학회논문집
• /
• 제48권2호
• /
• pp.99-106
• /
• 2011

The appearance of CSR changes the concept of the hull form design as well as structural design, since the application of CSR inevitably brings the lightweight increase of a ship. Keeping the original design constraints such as principal particulars, deadweight, and speed performance, designers have to increase the volume of the hull form. As a result, the entrance angle at bow end should become larger, which results in blunter waterline shape. For a slow and full ship having high $C_B$ more than 0.85, a new concept of bow shape has been required to alleviate the increase of wave-making resistance, since it is very difficult to improve waterline and frameline shape for such a full ship. In this paper a new bow shape of Capesize Bulk Carrier was developed to improve its wave-making characteristics without incompliance with the design constraints. For loading manual calculation, NAPA software was used. FLUENT6.3.26 and WAVIS1.4 were used to evaluate resistance performance of the subject hull forms. The newly designed hull form was tested at SSPA model basin for the final confirmation of resistance and propulsion performance of the ship. It was found that the new bow shape of a Capesize Bulk Carrier improved the resistance characteristics greatly compared to a conventional bulbous bow. The other benefits of new bow shape on the manufacturability were also investigated.

• 한국해양공학회지
• /
• 제20권6호
• /
• pp.41-53
• /
• 2006

This experimental study investigated the flow characteristics for regular waves passing a rectangular floating structure in a two-dimensional wave tank. The particle image velocimetry (PIV) was employed to obtain the velocity field in the vicinity of the structure. The phase average was used to extract the mean flow and turbulence property from repeated instantaneous PIV velocity profiles. The mean velocity field represented the vortex generation and evolution on both sides of the structure. The turbulence properties, including the turbulence length scale and the turbulent kinetic energy budget were investigated to characterize the flow interaction between the regular wave and the structure. The results shaw the vortex generated near the structure corners, which are known as the eddy-making damping or viscous damping. However, the vortex induced by the wave is longer than the roll natural period of the structure, which presents the phenomena opposing the roll damping effect; that is, the vortex may increase the roll motion under the wave condition longer than the roll natural period.

• 한국전산유체공학회지
• /
• 제1권1호
• /
• pp.55-63
• /
• 1996

Numerical computations are carried out to analyze the characteristics of flow fields around Air Supported Ships. The computations are performed in a rectangular grid system based on MAC(Marker And Cell) method. The governing equations are represented in finite difference forms by forward differencing in time and centered differencing in space except for its convection terms. For the certification of this numerical analysis method, the computations of flow fields around a Catamaran, an ACV(Air Cushion Vehicle) modeled with pressure distribution on free surface and two SES(Surface Effect Ship)'s are carried out, The results of the present computations are compared with the previously presented computational and experimental results in the same condition.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.152-160
• /
• 2004

Studies to investigate the influence on hydraulic acoustic wave were conducted using pressure swirl atomizer under making frequency range from 0 to 60Hz using water as a propellant. Pressure oscillation from hydraulic sources gives a strong influences on atomization and mixing processes. The ability to drive these low frequency pressure oscillations makes spray characteristics changeable. The effect of pressure perturbation and its spray characteristics showed that low injector pressure with pressure pulsation gives more significantly than high injector pressure with pressure perturbation in SMD, spray cone angle, breakup length. Moreover, this data could be used for prediction of low combustion instability getting G factor.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.237.1-237.1
• /
• 2010

Recent developments such as concern over global warming, depletion of fossil fuels and increase in energy demands by the increasing world population has eventually lead to mass production of electricity using renewable sources. Ocean contains energy in form of thermal energy and mechanical energy: thermal energy from solar radiation and mechanical energy from the waves and tides. The current paper looks at generating power using waves. The primary objective of the present study is to maximize the primary energy conversion (first stage conversion) of the base model by making some design changes. The model entire consisted of a numerical wave tank and the turbine section. The turbine section had three components; front guide nozzle, augmentation channel and the rear chamber. The augmentation channel further consisted of a front nozzle, rear nozzle and an internal fluid region representing the turbine housing. Different front guide nozzle configuration and rear chamber design were studied. As mentioned, a numerical wave tank was utilized to generate waves of desired properties and later the turbine section was integrated. The waves in the numerical wave tank were generated by a piston type wave maker which was located at the wave tank inlet. The inlet which was modeled as a plate wall which moved sinusoidally with the general function, $x=asin{\omega}t$. In addition to primary energy conversion, observation of flow characteristics, pressure and the velocity in the augmentation channel, rear chamber as well as the front guide nozzle are presented in the paper. The analysis was performed using the commercial code of the ANSYS-CFX. The base model recorded water power of 29.9 W. After making the changes, the best model obtained water power of 37.1 W which represents an increase of approximately 24% in water power and primary energy conversion.

• 대한조선학회논문집
• /
• 제45권5호
• /
• pp.502-512
• /
• 2008

CFD tools were intensively used to develop a bulk carrier hull form of 180,000 DWT. HCAD and WAVIS were utilized to vary and evaluate the hull forms. LCB and framelines were systematically changed starting from a mothership. Resistance characteristics have been assessed by evaluating the wave-pattern resistance and viscous pressure drag along with the wave profile and wake distribution. It was found that the hull forms obtained from LCB variations were not good enough to satisfy the target resistance coefficient because of large wave generation at the design speed. After choosing the appropriate one from the LCB variation series, bow and stern framelines have been modified to improve wave-making characteristics and wake distribution, respectively. Model tests were performed to confirm the CFD results. Furthermore, the effect of free surface on CFD application was investigated, and a few comments are given on the difference between WAVIS version 1.4 and 2.0.

• 한국지반공학회논문집
• /
• 제21권4호
• /
• pp.145-154
• /
• 2005

러브파와 레일리파는 표면파로서 각 파가 가지는 분산특성을 활용하여 지반의 강성주상도를 파악할 수 있는 특징을 가지고 있다. 이 중 러브파는 한 방향에 대한 응력-변위만 고려하면 되기 때문에 수치적 모델링이 간단하다. 전파시에는 이론적으로 체적파의 영향 및 밀도의 변화가 없어 각 각의 물성치를 갖는 다층구조지반에서 적용성이 높다고 할 수 있다. 이러한 장점을 활용하여 최종적으로는 단파장에 유리한 러브파와 장파장에 유리한 레일리파의 분산정보를 같이 이용하여 동시역산해석을 할 수 있는 기법을 제안하고자 한다. 해석기법은 크게 3가지로 구성되는데, 러브파와 레일리파의 정모델링 해석을 위해 전달행렬법의 구성, 대상 지반의 시스템 결정을 위한 민감도행렬의 구성 그리고 역산해석기법인 Damped Least Square Solution (DLSS)이다. 동시역산의 방법은 민감도행렬을 구성할 때 레일리파와 러브파의 분산정보가 동시에 사용되며, 계산된 민감도행렬을 역산해석하여 지반의 전단파 주상도를 반복적으로 계산하게 된다. 동시역산해석의 목적은 각 파의 주파수 기여도가 다른 점을 활용함으로서 역산결과의 정확도와 수렴도를 향상하고자 함이다.

• The Journal of Asian Finance, Economics and Business
• /
• 제5권4호
• /
• pp.201-211
• /
• 2018

The paper suggests making a policy and strategies for a way of exporting Korean ICT product effectively in the EU and Eastern area, and an effective preparation of 4^th industrial revolution through analysis of preparation status of 4^th industrial revolution of the Visegrad group. Analyze policy, status, what they want for 4^th preparation in the Visegrad group from comparing characteristics analysis of each country's official data, publication data, portal, paper, and etc. They have been preparing for 4^th industrial revolution long time ago as basic research and business before 4^th wave word. With these basic results, they are trying to apply such as, AI, S/W, security, ICT, etc. of 4^th wave core technology. For the development of new export market in EU, the Korean team should research with university and research center or venture company. Through these cooperation, they should understand their personal characteristic, lifestyle, and what consumers want to purchase in EU. And this results can be used in South Asia and India that give a big effect to all over the world ICT market. The external impact of the 4^th wave must have a long-term shift in manpower, and production policy is related to the EU's strategic role, or the preparation of the 4^th wave to the V4 country in the short term.