• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.4
• /
• pp.308-315
• /
• 2009

Wave-current interaction due to strong ambient currents causes to alter wave properties such as wave height, wave profile and wave spectrum. In this study we first examined the SWAN model's applicability by comparing with an analytical solution of Suh et al. (1994) for wave-current interaction in finite water-depth. Numerical experiments using SWAN model have been conducted for Garolim Bay to estimate the design waveheights influenced by strong tidal currents. For the design wave periods of 8~10 sec, the design wave height of 3 m in NNW direction was increased by up to 40% when the incident waves encounter the opposing currents of 1.4 m/s while the wave height was reduced by 26% due to the following currents of 1.1 m at the bay mouth. This result indicates that the effect of wave-current interaction must be included to determine the design wave height if there exists a strong current.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.4
• /
• pp.131-140
• /
• 1996

In this paper, we propose the method that extracts the speech feature using the hearing model through signal precessing techniques. The proposed method includes following procedure ; normalization of the short-time speech block by its maximum value, multi-resolution analysis using the discrete wavelet transformation and re-synthesize using thediscrete inverse wavelet transformation, differentiation after analysis and synthesis, full wave rectification and integration. In order to verify the performance of the proposed speech feature in the speech recognition task, korean digita recognition experiments were carried out using both the dTW and the VQ-HMM. The results showed that, in case of using dTW, the recognition rates were 99.79% and 90.33% for speaker-dependent and speaker-independent task respectively and, in case of using VQ-HMM, the rate were 96.5% and 81.5% respectively. And it indicates that the proposed speech feature has the potentials to use as a simple and efficient feature for recognition task.

• Journal of Sensor Science and Technology
• /
• v.18 no.1
• /
• pp.22-27
• /
• 2009

The GPS(global positioning system) made up of 28 artificial satellites going round around the earth at a height of 20,000.Km is a system to determine the receiver's location by measuring the distance between the satellite and receivers using an electronic wave. Recently it's been widely used in various applications, such as a navigator, a surveying system, etc. In this paper, we propose a new algorithm to transform coordinates from GPS signals corresponding to various sizes of maps, and the application using this algorithm is also introduced. The algorithm is programmed by MFC on the WinCE 5.0 operating system, and the GPS receiver with a 20 channel high sensitivity and GPS microcontroller chip manufactured by SiRF Technology was used.

• Journal of Mechanical Science and Technology
• /
• v.15 no.5
• /
• pp.665-670
• /
• 2001

The interaction of a travelling shock with the shear layer of a flat plate is studied computationally. The Euler and Navier-Stokes equations are solved numerically on quadrilateral unstructured adaptive grids. The flat plate is installed horizontally on the central axis of a shock tube. The shear layer is first created by two shock waves at different speeds splitted by a flat plate. A series of small vortices is developed as a consequence in the shear layer. The shock wave reflected at the end wall impinges the shear layer. The complicated shock dynamics in the evolution to the pseudo-steady state is represented with the morphological transformation of a planar shock into an oblique shock.

• Proceedings of the KSPS conference
• /
• 1996.10a
• /
• pp.435-447
• /
• 1996

In this paper, we propose the method that extracts the speech feature using the hearing model through signal processing techniques. The proposed method includes the following procedure ; normalization of the short-time speech block by its maximum value, multi-resolution analysis using the discrete wavelet transformation and re-synthesize using the discrete inverse wavelet transformation, differentiation after analysis and synthesis, full wave rectification and integration. In order to verify the performance of the proposed speech feature in the speech recognition task, korean digit recognition experiments were carried out using both the DTW and the VQ-HMM. The results showed that, in the case of using DTW, the recognition rates were 99.79% and 90.33% for speaker-dependent and speaker-independent task respectively and, in the case of using VQ-HMM, the rate were 96.5% and 81.5% respectively. And it indicates that the proposed speech feature has the potential for use as a simple and efficient feature for recognition task

• Journal of KSNVE
• /
• v.9 no.3
• /
• pp.509-516
• /
• 1999

The ESPI (Electronic Speckle Pattern Interferometry) algorithm has been simulated to calculate vibrational modes of a thin right-angled STS304 plate. The phase transformation of the reference wave of the ESPI is carried out only one time during vibration in order to clarify ESPI speckle patterns. Two dimensional vibrational modes are calculated from one ESPI pattern before vibration onset and two ESPI patterns during vibrations but with and without the phase transformation. The ESPI harmonic results are compared with those derived from the finite element method (FEM), and they agree very well. Additionally a phase unwrapping algorithm has been newly developed to derive a displacement map from an ESPI phase map.

• Journal of Biomedical Engineering Research
• /
• v.5 no.2
• /
• pp.133-142
• /
• 1984

The EMG signal can be considered as a signal source that expresses the intention of man because it is a electrical signal generated when the man contracts muscles. For proportional control of prostheses, the control signal proportional to the mousle contraction level must be estimated. Typically a foul-wave rectifier and low-pass filter are used to estimate the proportional control signal from the EMG signal. In this paper, it is proposed to use a logarithmic transformation and a linear minimum mean square error estimator. A logarithmic transformation maps the myoelectric signal into an additive control signal-plus-noise domain and the Kalman filter is used to estimate the control signal as a linear minimum mean square error estimator. The performance of this estimator is verified by the computer simulation and the estimator is applied to the EMG obtained from the biceps brachii muscle of normal subjects.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.887-888
• /
• 2006

In this paper, we devised mac-yule detection system which provide resting state mac-yule. The devised system composed of signal transformation part, signal processing part, and PC based display part. Hardware part consisit of PPG, ECG, EEG, EMG, and RSP. Also, software system consist of bio-signal processing software which detecting mac-yule. EEG-$\alpha$, $\beta$ wave analysis algorithm that use wavelet transformation, RSP detecting algorithm which used zero-crossing method.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.60-63
• /
• 2003

This paper describes the design and the simulation of a V-band single pole double throw (SPDT) FET switch fur millimeter-wave applications using drain impedance transformation network with CPW transmission line. The designed switch has about 10% bandwidth at 60GHz. Insertion loss is better than 3dB fur the ON state and Isolation is larger than 30dB fer the OFF state. The maximum isolation is 43.4dB at 60GHz with input power of 10dBm. The yield analysis is done considering the effects of pHEMT variations.

• Earthquakes and Structures
• /
• v.13 no.1
• /
• pp.39-50
• /
• 2017

Displacement response and corresponding maximum response energy of structures are key parameters to assess the dynamic effect or even more destructive structural damage of the structures. By employing them, this research has compared the structural responses of jacket supported offshore wind turbine (OWT) subjected to seismic excitations apprehending earthquake incidence, when (a) soil-structure interaction (SSI) has been ignored and (b) SSI has been considered. The effect of earthquakes under arbitrary angle of excitation on the OWT has been investigated by means of the energy based wavelet transformation method. Displacement based fragility analysis is then utilized to convey the probability of exceedance of the OWT at different soil site conditions. The results show that the uncertainty arises due to multi-component seismic excitations along with the diminution trend of shear wave velocity of soil and it tends to reduce the efficiency of the OWT to stand against the ground motions.