• 한국공작기계학회논문집
• /
• 제17권3호
• /
• pp.8-13
• /
• 2008

The paper proposes a model-based measurement of unsteady flow rate by using distributed parameter pipeline model and the measured pressure values at two distant points along the pipeline. The distributed parameter model of hydraulic pipeline is applied with consideration of frequency dependent viscosity friction and unsteady velocity distribution at a cross section of a pipeline. By using the self-diagnostics functions of the measurement method, the validity is investigated by comparison with the measured and estimated pressure and flow rate wave forms at the halfway section on the pipeline. The results show good agreement between the estimated flow rate wave forms and theoretical those under unsteady laminar flow conditions. The method proposed here is useful in estimating unsteady flow rate through an arbitrary cross section in hydraulic pipeline and components without installing an instantaneous flowmeter.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2017년도 학술발표회
• /
• pp.514-514
• /
• 2017

Floating breakwaters were treated as solid bodies without any perforation in previous studies. In this study, however, a floating breakwater is perforated to allow the partial absorption of the energy produced by incident waves and an air chamber is placed in the upper part to control the breakwater draft. A series of laboratory experiments for a floating breakwater installed with a mooring system are carried out. In general, a mooring system can be classified by the number of mooring points, the shape of the mooring lines, and the degree of line tension. In this study, a four-point mooring is employed since it is relatively easier to analyze the measured results. Furthermore, both the tension-leg and the catenary mooring systems have been adopted to compare the performance of the system. In laboratory experiments, the hydraulic characteristics of a floating breakwater were obtained and analyzed in detail. Also, a hydraulic model test was carried out on variable changes by changing the mooring angle and thickness of perforated wall. A hydraulic model was designed to produce wave energy by generating a vortex with the existing reflection method. Analysis on wave changes was conducted and the flow field around the floating breakwater and draft area, which have elastic behavior, was collected using the PIV system. From the test results the strong vortex was identified in the draft area of the perforated both-sides-type floating breakwater. Also, the wave control performance of the floating breakwater was improved due to the vortex produced as the tension in the mooring line decreased.

• 한국해안·해양공학회논문집
• /
• 제27권1호
• /
• pp.38-49
• /
• 2015

지진해일에 대한 기존의 연구는 이차원 Boussinesq 모형과 Solitary wave에 기초한 수치해석이 그 주류를 이룬다. 최근 Solitary wave에 의한 처오름 높이가 관측치를 하회한다는 인식에 기초하여 지진해일 내습전 해안선이 전진하는 현상의 모의가 가능한 Leading Depression N (LDN) Wave가 제시되었으며 이에 기초하는 경우 보다 정확한 모의가 가능한 것으로 보고된 바 있다. 이러한 성과에도 불구하고 수리모형 실험의 경우 안정적인 Leading Depression N (LDN) Wave의 구현에 상당한 어려움을 겪어왔다. 이러한 이차원 Boussinesq 모형과 삼차원 수리모형 실험에서의 상충된 결과는 이차원 Boussinesq 계열 파랑 모형 유도과정에서 수행되는 파랑의 비선형성과 분산성이 균형을 이룬다는 가정과 이로 인해 다소 과소하게 평가된 분산성에 기인하는 것으로 판단된다. 이러한 인식에 기초하여 본고에서는 삼차원 수치수조에서 비교적 안정적인 LDN 파형의 조파가 가능한 수정 조파기법과 Navier Stoke 파랑모형에 기초하여 Hybrid Breaker의 지진해일에 의한 처오름 저감효과를 수치 해석하였다. 파랑모형의 검증은 불규칙 파랑을 대상으로 기 수행된 수리모형 실험결과를 토대로 진행되었으며, 그 결과 비교적 근접한 처오름 높이를 얻을 수 있었다. 세 개의 유수실과 전면 경사면으로 구성된 Hybrid Breaker의 경우 일반 경사제에 비해 H = 5m의 경우 약 13%, H = 6 m의 경우 10%정도의 처오름 저감 효과를 지니는 것으로 모의되었다.

• 한국해양공학회지
• /
• 제9권2호
• /
• pp.41-52
• /
• 1995

the necessity of development of the Nearshore zone greatly emphasis in recent years. In the wave deformation model, we can get the wave height and wave direction using the hyperbolic mild slope equation considered the reflection wave. Radiation Stress the driving force of flow was calculated by the Watanabe and Maruyama who proposed on the partial standing wave. In the surf zone, applying the Izumiya and Horikawa's turbulent model considered the bottom friction and energy dissipation, we compared and examined with the Numerical model and Hydraulic test result of Watanabe and Maruyama. This model results obtained for Jin-ha Beach agreed well with the Numerical results. This model is expected so helpful to solve the prediction of the wave deformation problems in the development of the Nearshore zone in the future.

• 한국전산구조공학회논문집
• /
• 제24권6호
• /
• pp.601-608
• /
• 2011

부유구조체의 설계를 위해서는 파랑하중하에서 부유구조체의 파랑운동 특성과 구조거동에 대한 평가가 요구된다. 부유구조체의 구조거동 평가에서는 파랑하중에 의한 파압분포가 반영되어야 하지만, hydrodynamic 해석모델과 구조해석 모델사이의 파압 연계가 어려워 정확한 구조거동 평가가 어려웠던 문제점이 있었다. 본 논문에서는 파랑하중하에서 대형 부유구조체의 정확한 구조거동 평가를 목적으로 파랑운동-구조거동 통합해석을 실시하였다. AQWA에 의한 hydrodynamic 해석을 바탕으로 부유구조체에 작용하는 파압 분포를 ANSYS Inc.에서 제공하는 Workbench 인터페이스를 이용하여 ANSYS의 구조해석 모델에 연계하였다. 연구결과 본 연구의 파랑운동-구조거동 통합해석은 파랑하중에 의해 부유구조체에 발생하는 파압분포를 구조해석 모델에 정확하게 반영할 수 있어 파랑하중에 의한 부유구조체의 구조거동을 정확하게 평가할 수 있는 것으로 나타났다. 또한, 상부 슬래브의 인장응력은 파랑 입사각 $0^{\circ}$의 경우에 가장 불리하고, 하부 슬래브의 인장응력은 파랑 입사각 $45^{\circ}$의 경우에 가장 불리한 것으로 나타났다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1261-1265
• /
• 2003

Axial piston pumps of bent axis have been commonly used in hydraulic systems because of high pressure level. best efficiency, low shear force on pistons and low operating costs. The other side, they have a few demerits like that they have the relatively high number of moving parts and more discharge pressure ripples. Especially, the discharge pressure ripples bring about vibrations and noises in hydraulic system components such as connecting pipes and control valves, so that these deteriorate the stability and accuracy of the systems. Therefore, the hydraulic systems having the axial piston pumps of bent axis require the methods to reduce the discharge pressure ripples. So, the purpose of this paper is to reduce the discharge pressure ripples by the phase interference of pressure wave and to develope the analysis model of the pumps to predict the discharge pressure ripples. In this paper, the analysis model of the axial piston pumps of bent axis was developed using the AMESim software, and the reliability of that was verified by the comparison with the experimental results. The hydraulic pipeline with a parallel line was used as the method to generate the phase interference of pressure wave. the dynamics characteristics of the hydraulic pipeline with a parallel line were analyzed by a transfer matrix method. the usefulness of the phase interference of pressure wave was investigated through the experiment and simulation. The results from the experiment and simulation said that the phase interference of pressure wave by the hydraulic pipeline with a paralle linel could reduce the discharge pressure wave of the pump well. The analysis model of the axial piston pumps of bent axis developed in this paper and the method of the phase interference by the hydraulic pipeline with a parallel line are expected to be helpful to achieve the design of the pump and to reduce the discharge pressure wave of the pump effectively.

• 한국항만학회지
• /
• 제13권2호
• /
• pp.399-408
• /
• 1999

Copeland’s(1985) hyperbolic mild-slope equation including diffraction refraction and reflection in the wave field is used as a governing equation in this study. The result of Maruyama & Kajima(1985) is used to calculate wave direction and that of Watanabe & Maruyama(1986) is used as a energy dissipation formula. Numerical solutions are obtained by the Leap-Frog scheme and compared with Watanabe & Maruyama’s (1984) hydraulic experimental results and numerical simulation results for the detached breakwater. This wave model is applied to a detached breakwater and compared with Watanabe and Maruyama’s (1984) hydraulic model results to check the characteristics of reflected wave field around a detached breakwater. The distribution of wave height and we phase in front of a detached breakwater is more accurate than the Watanabe and Maruyama’s numerical results. The results from our wave model show good agreements with the others and also show nonlinear effects around the detached breakwater. This model is applied to the Gamcheon harbor of pusan. the field observations were carried out at Pusan harbor wave station in 1986-1995 and the results were accepted as a design wave condition in this study. The wave height and wave period was measured by Dong-A university at one station in the Gamcheon harbor in 1996-1997 and used as a calibration criterion. The measured data were used as input data for the numerical simulation and also compared with simulated results. The numerical simulation shows a fairly good results which considering the effect of topographic characteristics and effect of narrow entrance due to two separated breakwaters in Gamcheon harbor. The wave distribution characteristics inside Gamcheon harbor is quite different with the offshore wave direction and wave period.

• 한국해안해양공학회지
• /
• 제15권4호
• /
• pp.249-258
• /
• 2003

본 연구에서는 사석, cube및 tetrapod를 대상으로 불규칙파를 적용하여 경사식방파제의 피복재 안정성에 대한 2차원 실험을 수행하였다. 파복재 중량산정식으로는 Hudson식과 van der Meer식을 대상으로 하였으며, Hudson식은 규칙파, van der Meer식은 불규칙파를 적용한 실험으로부터 얻어진 식이다. 본 연구의 목적은 실험결과를 이용하여 Hudson식과 van der Meer식을 비교 검토하는 것이다

• 대한토목학회논문집
• /
• 제36권5호
• /
• pp.805-817
• /
• 2016

본 연구에서는 쓰나미에 대응할 수 있는 다양한 파형의 고립파를 수리/수치파동수조에서 안정적으로 생성시키기 위하여 기존의 고립파 근사이론에 관한 검토를 수행하였다. 그리고 이 근사이론식을 토대로 다양한 고립파의 파형을 추정할 수 있는 두 가지 방법을 제안하였다. 이 방법들은 기존의 고립파 근사식들을 토대로 파형분포조절계수와 가상수심계수를 적용하여 다양한 파형 및 유속을 추정하는 절차를 거친다. 새롭게 제안한 고립파 추정방법들을 수리/수치파동수조의 조파에 적용하였다. 그 결과, 수리파동수조에서는 조파기의 위치정보신호를 추정할 수 있을 뿐만 아니라, 기존의 수리모형실험의 입력신호와 매우 유사한 것을 확인할 수 있었다. 수치파동수조에서는 파랑을 생성하기 위하여 고립파의 파형 및 유속을 적용하였다. 그리고 기존의 고립파 근사이론으로는 재현할 수 없었던 쓰나미의 파형을 조파할 수 있었고, 기존 실험결과와 높은 일치도를 나타내는 것을 확인할 수 있었다. 이로써 수리/수치파동수조에서 안정적인 쓰나미를 생성하기 위하여 제안한 두가지 추정방법의 타당성 및 유효성을 확인할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.205-208
• /
• 2002

Numerous studies have been performed to develop an analytical model that can predict the reflection of regular or irregular waves from a perforated-wall caisson breakwater. Though such irregular wave models as Suh et at. (2001) become available, regular wave models are still in extensive use because of their simplicity. In the present study, using the regular wave model of Fuggazza and Natale(1992), the reflection of irregular waves from a perforated-wall caisson breakwater was calculated in several different methods. First, the regular wave model was re-validated by the hydraulic model tests. Though the model somewhat over-predicted the reflection coefficients at larger values and under-predicted them at smaller values, overall agreement was pretty good between calculation and measurement. Then, the regular wave model was applied to calculate the irregular wave reflection in the experiments of Suh et at.(2001) and Bennett et al. (1992). In applying the regular wave model to irregular wave reflection, several different methods were used. The results showed that it is the most reasonable to use the regular wave model repeatedly for each frequency component of the irregular wave specuum with the root-mean-squared wave height for all the frequencies .