• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.532-537
• /
• 2005

The techniques of internally generating waves on a curve in a rectangular grid system are developed using the line source method. Numerical experiments are conducted using the extended mild-slope equations of Suh et al. (1997). For five different types of wave generation layout, numerical experiments are conducted in the cases of the propagation of waves on a flat bottom, and the refraction and shoaling of waves on a plane slope. The fifth type of wave generation, which consists of two parallel lines connected to a semicircle, shows the best solutions especially when the grid size is small enough.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권7호
• /
• pp.1012-1016
• /
• 2009

This paper describes the control and monitoring system for OWEC (Overtopping Wave Energy Converter) which shows the characteristic of power stabilization in overtopping wave energy converter system. Overtopping waves generates different water pressure and the turbine is rotated by this pressure. As a result, overtopping wave energy converter is able to convert wave energy into electricity. Small size of overtopping wave energy converter is developed to simulate the control monitoring system which is able to control power generation and also monitor the system condition. The result shows the reduction of fluctuation from the overtopping wave energy system by the developed control monitoring system. In addition, the DB(Data Base) of test results are contributed to the research and development for OWEC.

• 한국항행학회논문지
• /
• 제16권1호
• /
• pp.54-61
• /
• 2012

차세대 ITS 환경을 위한 차량용 무선 통신 규격인 WAVE 규격은 IEEE 802.11p와 IEEE P1609 규격을 통칭하며, IEEE 802.11p의 규격제정이 마무리됨에 따라 최근 많은 연구가 진행되고 있다. 고속 차량 환경과 실내 환경의 차이는 무선 통신 채널 모델이 훨씬 가혹하다는 것이다. 따라서, 무선 통신 시스템의 설계 시 온도, 잡음, 다중 경로 페이딩과 같은 시스템의 성능을 저하시킬 수 있는 사항들을 충분히 고려하여야 한다. 본 논문에서는 IEEE 802.11p PHY/MAC을 기반으로 하는 WAVE 무선 통신 시스템을 위한 RF 회로를 설계하고 실제로 구현하면서 나타나는 문제들을 보이고 이를 해결하는 과정을 보였다.

• 한국산업융합학회 논문집
• /
• 제23권6_2호
• /
• pp.999-1006
• /
• 2020

This study was conducted to develop an efficiency prediction program of a hydraulic secondary energy converter for calculating annual power generation of a Wavestar type wave power generator. Using the period and wave height obtained from the frequency domain analysis, the behavior of the floating body was obtained by assuming the sin function. The piston displacement and speed of the hydraulic cylinder were calculated considering the behavior of the floating body and the shape of the mechanism. The numerical simulation of the hydraulic system was performed by physically modeling the hydraulic cylinders, check valves, hydraulic motors, which are the main devices. In the future, this analysis program will be used to develop a program for estimating annual power generation of a moveable body type wave power generation device.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2011년도 전기공동학술대회 논문집
• /
• pp.192-192
• /
• 2011

For the safety of vessels sailing Marine Transport Facility announces sea route, reefs or shallow water. Photovoltaic, independent power system, installation in the general Marine Transport Facilities to be used in the marine lantern. Due to install of communications, controls, power consumption inceases. And the weather of cloudy day or rainy, generation of electricity is decrease. Recently, power system of marine facility using a hybrid generation system, photovoltaic generation system and wave power generation system. But increase of adhered shellfish inside the water column, is the cause of the reduction of efficiency. So study was conducted to Single channel AFS(Anti-Fouling system). In this paper we offer the Multi channel AFS for Marine Transport Facility and have simulated. Improve the accuracy of the research, we using the result of anode, in the experiment were actually in the buoy, is based on simulation. The experimental results is shown every anode's, in the Marine Transport Facility, ionization was conducted identically.

• 한국해양공학회지
• /
• 제29권4호
• /
• pp.317-321
• /
• 2015

Many kinds of generation systems have been developed to use ocean energy. Among these, with the use of an oscillating water column (OWC) for power generation is attracting attention. The OWC-type wave power generation system converts wave energy into electricity by operating a generator turbine with the oscillating water level in a column of water. There are two ways to convert wave power into electricity using an OWC. One uses a cross-flow turbine using the water level inside the OWC. The other method uses the flow of air in a Wells turbine, which depends on the water level. An experiment was carried out using a 2-D wave tank in order to minimize the number of empirical tests. The design factors were taken from Koo et al. (2012) and the experimental environment assumed by free surface motion. This paper deals with characteristics of two types of wave energy conversion systems combine with a breakwater. One model uses an air-driven Wells turbine and a cross-flow water turbine. The other type uses a cross-flow water turbine. Wave energy converters with OWCs have mostly been studied using air-driven Wells turbines. The efficiency of the cross-flow turbine was about 15% higher than that of the other model, and the water level of the OWC internal chamber for the cross-flow water turbine and air-driven Wells turbine was less than about 40% lower than the one using only the cross-flow water turbine.

• 조명전기설비학회논문지
• /
• 제28권5호
• /
• pp.82-91
• /
• 2014

The combined generator system by integrating several renewable energy sources can share the electrical infrastructure and therefore have the advantage of constructing not only the transmission system but also the power conversion system. Among the various combined renewable system, the wind power and wave power has a high possibility of future growth due to the economic feasibility in offshore environment. This kind of large-scale combined systems might be follow the determination by the transmission system operator's directions and control the output profile by focusing at PCC. However, both renewable energies are depend on the unpredictable environmental variation; it is needed to do the compensation devices. In this paper, the ESS compensation plan is proposed to do output determination of the combined generator system by paying attention to active power of utility grid with the analysis of the controllable elements of the wind and wave power generator. The improvement of the new application technique of the combined system is confirmed through using the PSCAD/EMTDC. The entire simulation process was designed by adopting the active power control according to the reference signal of TSO.

• 대한조선학회논문집
• /
• 제47권3호
• /
• pp.359-368
• /
• 2010

This paper describes the generation and propagation of internal solitary wave in a two-layer fluid system by numerical analysis. Characteristics of interfacial soliton such as wave type, wave height, wave celerity are investigated numerically with respect to an extent of initial disturbance, fluid thicknesses of the two fluids and etc. The difference between the internal wave propagation on sloping beach and flat bottom was also examined. Laboratory experiments were conducted in the wave flume and compared with the results of numerical computation for verification.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권4호
• /
• pp.520-526
• /
• 2006

Wave Energy is a derivative of the solar energy input to the earth, which is accumulated on open water surfaces by the action of the winds Waves are disturbances in the water surface. This paper is interested primarily in progressive waves, which carry energy from one place to another Waves are irregular in size and frequency. Moreover the surface of the sea is one of the most hostile environments for engineering structures and materials. The idea of harnessing the tremendous power of the ocean's waves is not new. Hundreds of wave energy conversion techniques have been suggested over the last two centuries. Although many WECS (Wave Energy Conversion Systems) have been invented, only a few systems have been tested and evaluated. This paper describes the characteristic of WES (Wave Energy System) in terms of, devices, resource and potential, etc.. Finally, this paper provides a summary of general and specific conclusions and recommendations concerning WECS potential in Korea.

• 한국해안·해양공학회논문집
• /
• 제23권5호
• /
• pp.345-357
• /
• 2011

최근 지구환경문제와 에너지원의 다각화를 위한 일환으로 파랑에너지를 이용하는 신재생에너지의 기술개발이 유럽과 일본 등을 중심으로 활발히 추진 및 실용화되고 있다. 특히, 케이슨 내의 공기실에서 파랑에 의한 수면의 상하운동으로 유도되는 공기흐름을 이용하는 진동수주형 파력발전시스템은 가장 효율적인 파랑에너지흡수장치로 알려져 있고, 따라서 상업화에 가장 근접한 파력발전장치 중에 하나이다. 본 연구에서는 진동수주형 파력발전구조물에서 터빈(Wells터빈)에 직접 작용하는 공기흐름속도를 2차원 및 3차원수치실험으로부터 검토하며, 이 때 형상의 변화에 따른 공기의 최대흐름속도를 추정하여 진동수주형 파력발전구조물의 최적형상을 논의한다. 수치해석에서는 기체와 액체의 혼상동적현상을 동일한 지배방정식으로 해석하는 혼상류(2상류)수치모델에 기초한 3차원수치파동수로를 적용하였다. 이로부터 입사주기대에 따라 최적형상의 크기가 상이하게 나타나는 것을 확인할 수 있었고, 최소의 반사율이 발생하는 주기 대에서 공기흐름이 최대로 된다는 것을 알 수 있었다.