• Ocean and Polar Research
• /
• 제25권4호
• /
• pp.437-446
• /
• 2003

Field measurements of directional waves were carried out during the summer of 2002 at two coastal sites in water of finite depth. A couple of general purpose instruments were used employing acoustic Doppler technology. The aim of the study was to investigate the spatial behavior of the directional movement of waves as they come ashore. In total,74 tests were carried out during which sea states of low to moderate intensity were recorded. A great number of these runs displayed bimodal characteristics of the spreading function at high frequencies. It was found that in general, the frequency-integrated directional width tends to broaden as the water shoals and when refraction effects are negligible. This is attributed to wave-wave interactions that become pronounced in shallow water. The same directional width showed, also, a tendency to increase with increasing peak frequency of the sea state spectrum. The behavior of the kurtosis of the spreading function was also examined. It was found that for higher frequencies this index tends to increase in wave spectra above a certain sea severity threshold.

• 대한수학회보
• /
• 제52권6호
• /
• pp.1945-1962
• /
• 2015

This paper is mainly concerned with the formation of delta standing wave for the scalar conservation law with a linear flux function involving discontinuous coefficients by using the self-similar viscosity vanishing method. More precisely, we use the self-similar viscosity to smooth out the discontinuous coefficient such that the existence of approximate viscous solutions to the delta standing wave for the Riemann problem is established and then the convergence to the delta standing wave solution is also obtained when the viscosity parameter tends to zero. In addition, the Riemann problem is also solved with the standard method and the instability of Riemann solutions with respect to the specific small perturbation of initial data is pointed out in some particular situations.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2013년도 춘계학술대회
• /
• pp.275-276
• /
• 2013

This analysis method is based on the wave pressure function with the continuity in the analytical region including fluid and porous structures. Wave profiles coming with oblique angle to permeable submerged breakwater on the porous seabed are computed numerically by using boundary element method. When compared with the existing results for the oblique incident wave, the results of this study show good agreement. The results indicate that wave profiles own high dependability regarding the change of oblique incident waves and permeable submerged breakwater on the porous seabed. Therefore, the analysis method of this study are estimated to be applied as an accurate numerical analysis referring to oblique incident waves and permeable submerged breakwater on the porous seabed in real sea environment.

• 한국안전학회지
• /
• 제24권1호
• /
• pp.37-42
• /
• 2009

The present study is to estimate the effect of wave height affecting at the front face of breakwater systems, when a submarine trench is dredged in the distant offshore from outer breakwater. The wave diffraction field, which is important hydraulic factor in the ocean, is considered to be two dimensional(2D) plane and the configuration of the submarine trench on the sea bed designated by single horizontal long-rectangular system. The numerical simulation is performed by using Green function based on the boundary integral equation and meshed at moving boundary conditions. The results of present numerical simulations are illustrated by applying the normal incidence. It is shown that the ratios of wave height reduction at the front face of breakwater systems are approximately 20% by the effect of placing long trench on the sea bed. This study can effectively be utilized for safety assessment to various breakwater systems in the ocean field.

• 지구물리와물리탐사
• /
• 제9권1호
• /
• pp.93-101
• /
• 2006

이 연구에서는 유전자 알고리듬을 이용하여 수진기 함수와 표면파 위상 속도로부터 심부 퇴적층의 전단파 속도 구조를 결정하는 복합역산 방법을 제시하였다. 합성 탄성파 자료를 이용한 수치모형실험은 제시된 방법이 단지 수진기 함수만을 역산했을 때 발생하는 전단파 속도와 층 두께 사이의 trade-off와, 표면파 위상 속도만을 역산했을 때 심부구조에서의 불확실성을 피할 수 있음을 보여주고 있다 이 방법은 진앙거리 100km의 지진기록으로부터 얻은 수진기 함수들과 일본 Kanto 평원의 상시진동 배열 탐사로부터 얻은 레일리파의 위상속도에 적용되었으며, 추정된 심부구조는 선행된 굴절법 탐사 결과 및 심부 시추공 자료와 잘 일치하였다.

• PNF and Movement
• /
• 제18권1호
• /
• pp.117-126
• /
• 2020

Purpose: The purpose of this study was to investigate the effects of extracorporeal shock-wave therapy (ESWT) on pain, grip strength, and upper-extremity function in patients diagnosed with lateral epicondylitis and to provide an effective intervention method for lateral epicondylitis. Methods: Twenty patients with lateral epicondylitis were randomly assigned to the ESWT group (n = 10) and the stretching exercise group (n = 10). Interventions in both groups were performed six times twice a week for three weeks. The visible analog scale (VAS) was used to measure pain change. A dynamometer was used to measure grip strength (GS). Patient-rated tennis elbow evaluation (PRTEE) was used to measure the upper-extremity function. Results: There were significant differences in pain, grip strength, and upper-extremity function in both groups before and after intervention (p < 0.05). There were also significant differences in pain, grip strength, and upper-extremity function between the groups after intervention (p < 0.05). Conclusion: This study showed very positive improvement in pain, grip strength, and upper-extremity function after ESWT in patients with lateral epicondylitis. Therefore, ESWT can be recommended for patients with lateral epicondylitis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.591-595
• /
• 1997

In analysis of piping vibration of petrochemical plant, the forcing functions mainly depend upon the equipment working mechanism and vibration resources in the piping systems. In general, harmonic function is used for the system with rotary equipments. Mechanical driving frequencies, wave functions, and response spectrum are used for reciprocating compressors, surge vibration of long transfer piping, and seismic/wind vibration, respectively. In this study, for the spray injection case inside the pipe, forcing function was modeled, in which two different fluids are distributed uniformly. To confirm the results, the scheme used for the forcing function was applied for real piping system. The vibration mode of the real system was consistent with the 4th mode obtained by simulation using the forcing function formulated in this study.

• Interaction and multiscale mechanics
• /
• 제6권3호
• /
• pp.287-300
• /
• 2013

In this paper, the effect of impulsive line on the propagation of shear waves in non-homogeneous elastic layer is investigated. The rigidity and density in the intermediate layer is assumed to vary quadratic as functions of depth. The dispersion equation is obtained by using the Fourier transform and Green's function technique. The study ends with the mathematical calculations for transmitted wave in the layer. These equations are in complete agreement with the classical results when the non-homogeneity parameters are neglected. Various curves are plotted to show the effects of non-homogeneities on shear waves in the intermediate layer.

• 한국해양공학회지
• /
• 제17권6호
• /
• pp.1-6
• /
• 2003

Wave energy dissipation and energy transfer between wave components, during the directional wave breakings, are investigated. Directional incipient and plunging breakers were generated by focusing the multi-frequency and multi-directional wave components at a designed location, based on a constant wave amplitude and a constant wave steepness frequency spectrum. The time series of surface wave elevation was measured at 9 different locations around the wave focusing point, using a wave gauge array. In order to examine the variation of the directional spreading function, the horizontal velocity of fluid motion was also measured. By comparing energy spectrums, before and after the breaking, the characteristics of energy dissipation and energy transfer, caused by wave breaking, are investigated. Their dependencies on directionality, as well as frequency, are analyzed. The breakings significantly dissipate wave energy, through energy transfer, in the upper region of the peak-frequency band, while enhancing wave energy in the low-frequency band.

• 해양환경안전학회지
• /
• 제1권2호
• /
• pp.61-67
• /
• 1995

This study examines experimentally and theoretically, the wave deformation by two large cylindrical structure in relation to the case of one structure. The wave height around the structures varies, according to the changes of the incident wave angles, the number of the structure, and the distances between the two structures. The wave deformation around the large cylindrical structures is shown to be well predicted theoretically by the diffraction theory based on the singular point distribution method using a vertical line wave source Green's function.