• Journal of Ship and Ocean Technology
• /
• 제11권3호
• /
• pp.1-13
• /
• 2007

A semi-submersible drilling rig is regarded as one of the typical offshore structures operated in the field with moderate environments such as the Gulf of Mexico, Brazil, and West Africa. Its typical roll and pitch natural periods are around 30 seconds, which avoids prevailing regions of the wave energy spectrum, and their responses in waves are quite acceptable for common operation conditions. But large roll and pitch motions can be induced by wave difference frequency energy spectrum if the metacentric heights of a semi-submersible decrease to small values in some loading conditions, and it is because the roll and pitch natural periods increase and approach to the region where the spectral density of the low frequency wave drift moment has significant value. This paper describes the low frequency roll motion of a semi-submersible that are excited by the wave 2nd order difference frequency energy by a series of model experiments. From the model tests with several different initial metacentric heights (GM), it was observed that a semi-submersible can experience large roll motion due to the wave group spectrum.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.110-114
• /
• 2012

We studied on the nondestructive evaluation of the elastic wave signal of SiC ceramics and SiC/SiC composite ceramics under monotonic tensile loading. The elastic wave signal of cross and unidirectional SiC/SiC composite ceramics were obtained by pencil lead method and bending test. It was applied for the time-frequency method which used by the discrete wavelet analysis algorithm. The time-frequency analysis provides time variation of each frequency component involved in a waveform, which makes it possible to evaluate the contribution of SiC fiber frequency. The results were compared with the characteristic of frequency group from SiC slurry and fiber. Based on the results, if it is possible to shift up and design as a higher frequency group, we will can make the superior material better than those of exiting SiC/SiC composites.

• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.299-310
• /
• 2003

SASW 실험으로 지반의 전단강성 구조를 구하는 해석과정에 있어서 위상속도의 계산은 SASW 실험의 신뢰도를 좌우하는 매우 중요한 단계이다. 기존의 SASW 자료 분석기법 중 위상속도의 계산은 전문가적 경험을 이용한 위상각 스펙트럼의 분석이 선행되어야 하는데, 위상각 스펙트럼 분석 과정의 난해성은 SASW 기법의 일반화에 장애가 되어 왔었다. 본 연구에서는 SASW 기법에 적용가능하고, 위상속도 계산에 전문가적 경험을 배제할 수 있으며, 자동화함으로써 효율성을 제고할 수 있는 위상속도 계산 기법을 제안하였다. 본 연구에서 제안한 기법은 다층구조 지반에서의 표면파의 주파수파수 특성을 이용하였으며, 그 개념에 기초하여 주파수파수 기법(Frequency-Wave Number Technique)이라고 하였다. 본 연구에서 제안한 기법의 신뢰성을 검증하기 위하여, SASW 수치실험을 수행하였다. 그리고 SASW 수치실험에 의해 구한 이론 전달함수로부터 위상속도를 계산하여, 위상각전개법으로 구한 위상속도와 비교 검토하였다. 또한, 경기도$\bigcirc$$\bigcirc$ 지구에서 수행한 SASW 실험자료에 대해 본 연구에서 제안한 기법을 적용하여 현장적용성 및 실용성을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.771-775
• /
• 2006

There has been much effort to find suitable methods for structural analysis in the mid-frequency region where traditional low frequency methods have increasing uncertainties whilst statistical energy analysis is not strictly applicable. Systems consisting of relatively stiff beams coupled to flexible plates have a particularly broad mid-frequency region where the beams support only a few modes whilst the plate has a high modal density and modal overlap. A system of two parallel beams coupled to a plate is investigated based on the wave method, which is an approximate method. The wave model is extended from a single-beam-plate system, to a plate with two identical beams which is modelled using a symmetric-anti symmetric technique. Experimental results such as powers and energy ratios show the validity of the analytical wave models.

• 수산해양기술연구
• /
• 제33권3호
• /
• pp.248-258
• /
• 1997

The analytical solutions of the Fraunhofer Diffraction(FD) theory and the principle for measurement of the dispersion relation of plasma wave is presented. Especially, the method for measurement of low-frequency wave is discussed. The wavenumbers of the density fluctuations are obtained from the curve fitting between the expremental FD profile and theoretical one for each frequency component. In measurement of the wavenumber of the low -frequency region, the information of the wavenumber is easily obtained from the ratio of the intensity at = 0 to the intensity at =0.5. The millimeter wave FD apparatus was designed to measure low-frequency density fluctuations. The determined wavenumbers are in the range of =0.1~ 1.0cm. Thus, the millimeter wave FD method was shown to be useful for the measurement of low-frequency density fluctuations, which are impossible to be measured by using a convention. Thomson scattering. The obtained dispersion relations will be useful information for plasma waves.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.234-234
• /
• 2011

Electron-neutral collision frequency is one of the important parameters in the plasma physics and in industrial plasma engineering. We can understand the momentum, energy, and charge transport properties of the plasma using electron-neutral collision frequency.[1] The wave-cutoff method is a diagnostic method for the electron density measurement, but the cutoff peak value depends on gas pressure. The wave-cutoff signal becomes unclear as increasing gas pressure. The reason of pressure dependence is that the electron-neutral collision disturbs electron motion so that microwave can propagate through plasma at plasma frequency.[2] Using the pressure dependence of wave-cutoff method we can find the electron-neutral collision frequency. At first we tried to confirm this method using well known gas such as Ar. The cutoff signal decrease as increasing gas pressure (the simulation result). The wave-cutoff signal is unclear at a gas pressure of 500 mTorr. (electron density $1.0{\times}10^{10}/cm^3$, electron temperature 1.7 eV, electron -neutral collision frequency~1 GHz). In this condition, the electron-neutral collision frequency is closed to the wave-cutoff frequency.

• 한국소음진동공학회논문집
• /
• 제17권2호
• /
• pp.121-129
• /
• 2007

There has been much effort to find suitable methods for structural analysis in the mid-frequency region where traditional low frequency methods have increasing uncertainties whilst statistical energy analysis is not strictly applicable. Systems consisting of relatively stiff beams coupled to flexible plates have a particularly broad mid-frequency region where the beams support only a few modes whilst the plate has a high modal density and modal overlap. A system of two parallel beams coupled to a plate is investigated based on the wave method, which is an approximate method. Muller's method is utilised for obtaining complex roots of a dispersion wave equation, which does not converge in the conventional wave method based on a simple iteration. The wave model is extended from a single-beam-plate system, to a plate with two identical beams which is modelled using a symmetric-antisymmetric technique. The important hypothesis that the coupled beam wavenumber is sufficiently smaller than the plate free wavenumber is experimentally verified. Finally, experimental results such as powers and energy ratios show the validity of the analytical wave models.

• The Journal of the Acoustical Society of Korea
• /
• 제20권4E호
• /
• pp.45-51
• /
• 2001

This paper examines the dispersion relation governing the wave propagation on cylindrical shells. The assumption of thin shells allows the dispersion relation to be separated into three relations related to the propagation of flexural waves and two types of membrane waves. Those relations are used to identify the characteristics of the wave number curves. The dispersion relation provides two and three closed wave number curves below and above the ring frequency. Above the ring frequency three wave number curves are clearly identified to be those of flexural, shear and longitudinal waves, respectively. Below the ring frequency, the characteristics of two wave number curves are identified with dependence of the direction of wave propagation.

• Journal of the Optical Society of Korea
• /
• 제17권1호
• /
• pp.97-102
• /
• 2013

Frequency tuning characteristics of a THz-wave by varying phase-matching angle and pump wavelength in a noncollinear phase-matching THz-wave parametric oscillator (TPO) are analyzed. A novel scheme to realize the tuning of a THz-wave by moving the cavity mirror forwards and backwards is proposed in a noncollinear phase-matching TPO. The parametric gain coefficients of the THz-wave in a $LiNbO_3$ crystal are explored under different working temperatures. The relationship between the poling period of periodically poled $LiNbO_3$ (PPLN) and the THz-wave frequency under the condition of a quasi-phase-matching configuration is deduced. Such analyses have an impact on the experiments of the TPO.

• 한국안광학회지
• /
• 제7권1호
• /
• pp.51-55
• /
• 2002

본 연구는 정상 시력을 가진 피검자의 안구가 동향운동을 하도록 주시점의 위치를 변경하며, 동향운동이 대뇌 시 피질 cerebral visual cortex의 뇌파에 미치는 영향을 분석하였다. 시 유발전위 장치(visual evoked potential system)는 Bio-Pag(production in USA)을 이용하였으며, 검사결과는 컴퓨터에 입력하여 분석하였다. 검사실의 조도는 50lux이며, 사용한 시표의 직경은 3 cm의 붉은 광점이며, 우전 dextroversion과 좌전 levoversion에 따른 결과는 다음과 같다. 1. 시자극에 관계하는 시 피질의 뇌파 출현의 높은 빈도는 delta wave, beta wave, theta wave 그리고 alpha wave의 순으로 나타났다. 2. 우전과 좌전에 대한 뇌파의 종류와 진폭은 거의 비슷하다. 3. 진폭에 대한 히스토그램은 우전과 좌전 모두 가우시안 Gausian 분포로 나타났다. 4. 뇌파의 진폭에 대한 위상 분석의 결과는 거의 비슷하다. 5. 뇌파 진폭과 주파수에 대한 fast fourier transform 분석에서 대개 20 Hz 이하의 저주파 low frequency로 나타났으며, 우전과 좌전의 결과는 비슷하다.