• Journal of the Korean Society of Marine Environment & Safety
• /
• 제24권7호
• /
• pp.930-938
• /
• 2018

Underwater noise radiated from submarines is directly related to the probability of being detected by the sonar of an enemy vessel. Therefore, minimizing the noise of a submarine is essential for improving survival outcomes. For modern submarines, as the speed and size of a submarine increase and noise reduction technology is developed, interest in flow noise around the hull has been increasing. In this study, a noise analysis technique was developed to predict flow noise generated around a submarine shape considering the free surface effect. When a submarine is operated near a free surface, turbulence-induced noise due to the turbulence of the flow and bubble noise from breaking waves arise. First, to analyze the flow around a submarine, VOF-based incompressible two-phase flow analysis was performed to derive flow field data and the shape of the free surface around the submarine. Turbulence-induced noise was analyzed by applying permeable FW-H, which is an acoustic analogy technique. Bubble noise was derived through a noise model for breaking waves based on the turbulent kinetic energy distribution results obtained from the CFD results. The analysis method developed was verified by comparison with experimental results for a submarine model measured in a Large Cavitation Tunnel (LCT).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제28권1B호
• /
• pp.95-109
• /
• 2008

We numerically analyzed the nonlinear shoaling, a plunging breaker and its accompanying energetic suspension of sediment at a bed, and a redistribution of suspended sediments by a down rush of preceding waves and the following plunger using SPH with a Gaussian kernel function, Lagrangian Dynamic Smagorinsky model (LDS), Van Rijn's pick up function. In that process, we came to the conclusion that the conventional model for the tractive force at a bottom like a quadratic law can not accurately describe the rapidly accelerating flow over a swash zone, and propose new methodology to accurately estimate the bottom tractive force. Using newly proposed wave model in this study, we can successfully duplicate severely deformed water surface profile, free falling water particles, a queuing splash after the landing of water particles on the free surface and a wave finger due to the structured vortex on a rear side of wave crest (Narayanaswamy and Dalrymple, 2002), a circulation of suspended sediments over a swash zone, net transfer of sediments clouds suspended over a swash zone toward the offshore, which so far have been regarded very difficult features to mimic in the computational fluid mechanics.

• Knowledge Management Research
• /
• 제17권3호
• /
• pp.181-206
• /
• 2016

Under the influence of growing popularity of "hallyu" (Korean wave), corporates that have copyrights such as music, movie, drama as their core competitiveness are showing continuing growth. In Addition, they built on contents are rapidly growing, interests in protection and management of intellectual property rights linked to contents are growing. Global contents development corporates are making great efforts to create profits out of copyrights. They could utilize original contents to strengthen brand value use it to produce additional contents in current market. Also they take advantage of existing storyline of the contents and strong brand to explore new markets. This paper looks into Value articulation model by Professor James Conley and analyzed the firms that utilized intellectual property rights to extend the period of protection, strengthen their competitiveness and succeeded in breaking into new market by using the rights they possess. Also, this paper examines the usage of intellectual property rights and business expansion strategy of of Iconix, the Korean entertainment company, which gained tremendous popularity in last ten years using this model. In Value articulation model, Conley classifies the process of exploiting the portfolio of the single product's(or service's) intellectual property right for a period of time into three stages ; value transference, value translation, value transportation. Pororo's strategy of utilizing intellectual property right is suggestive to domestic entertainment companies. Under the influence of hallyu" (Korean wave), domestic contents such as movies, dramas and music are enjoying the high level of popularity recently not to mention animations. In reality, Korean entertainment companies who have no background or experience of Intellectual property rights are not creating enough added values compared to fast growing market. It is believed Iconix's intellectual property rights management strategy will suggest positive aspects to domestic companies. Moreover, I hope various intellectual property rights management strategies including Conley's value articulation are studied and they can make contributions to managing domestic entertainment companies.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권9호
• /
• pp.1075-1080
• /
• 2014

This study aims at dedicating to relevant technology fields by suggesting design methods of structures and estimating their safety in relation to substructure for offshore wind power requiring high safety to various environment conditions. Especially, with respect to 5MW Offshore Wind Power System, this study will provide information about major wind directions and duration in combination with the developing wave climate at the test field. Therefore, connections between wind fields and approaching wave trains will be estimated and their intensity, direction and time shift will be pointed out. Furthermore, the local pressure distribution of breaking waves will be investigated by physical and numerical modeling. The currently applied structural and fatigue assessment of support structures for offshore wind energy converters is based on common design rules. Normally, constructions in structural engineering are treated as limited, single structures. This means that varying aspects of manufacturing are considered by high safety factors.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제6권4호
• /
• pp.11-19
• /
• 1986

This study aims at the elucidation of the distribution of longshore currents after wave breaking. Longshore currents have relations to the beach process and dispersion of contaminants in the nearshore region, thus the understanding of its. mechanism is very important. In the present study, using the electromagnetic current meter, the water particle velocity is measured in the 3-dimensional wave field and Eulerian mean velocity is obtained. At the same time, from the dispersion of tracer, the Lagrangian mean velocity is also obtained. It is observed that the longshore currents were confined within the surf zone and the maximum value of them exists in the surf zone. The longshore currents were considered to be constant toward the depth and we obtained the similar distribution of longshore currents between the measured value and the theoretical ones by Longuet-Higgins model.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• 제19권5호
• /
• pp.418-428
• /
• 2007

In the calculation of wave propagation by Boussinesq equation model, it is very common to experience numerical noises generated from nonlinear interaction and breaking wave occurrence, and the numerical solution is rapidly diverged unless the noises are properly controlled. A comparative study was here undertaken for the characteristics of three different lowpass filters (FFT filter, Gaussian filter and Shapiro filter) which are all designed to be applied to the interim results of numerical calculation. The numerical results obtained with application of respective filter techniques were compared with the results of an existing hydraulic experiment for the aspects of noise suppression, conservation of main signal and altering time. The results show that the Shapiro filter can be best applied with optimal choices of its element number, pass number and filtering tune interval. The combination of the number of filter element off, pass number of 50 or less, and application interval of 100 to 200 time steps generally showed good performance in both accuracy and efficiency of the numerical calculation.

• Journal of the Korean Society for Marine Environment & Energy
• /
• 제19권2호
• /
• pp.129-136
• /
• 2016

Floating offshore structures keep its position by a mooring system against various kind of environmental loadings. For this reason, a reliable design of the mooring system is a key factor for initial design stage of a floating structure. However, there exists possibility of mooring failure, even the system is designed with enough safety margin, due to the unexpected extreme environmental conditions or long-term fatigue loadings. The breaking of one of the mooring lines may change the tension level of the other mooring lines, which can potentially result in a progressive failure of the entire structure. In this study, time domain numerical simulation of 10MW class wind-wave hybrid platform was carried out with partially broken mooring line. Overall platform responses and variations of the mooring line tension were numerically evaluated.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• 제20권1호
• /
• pp.101-109
• /
• 2008

Several numerical models for predicting beach profile changes have been developed by many researchers. Many of the earlier models are known to simulate the erosional profiles with the formation of offshore bar. However, most of the models don't have proper mechanism to incorporate the recovery process of the eroded profiles after a storm and can not simulate the beach accretion with acceptable accuracy. In order to overcome these shortcomings, we propose a new numerical model which has new features to simulate the accretional phase of beach recovery process after storm including such as redistribution of suspended sand particles near the breaking point. The simulation results of the proposed model were compared with LWT (Large Wave Tank) experiments performed at CRIEPI (Central Research Institute of Electric Power Industry in Japan) and CE (the Us Army Corps of Engineers) and it was shown to have performed better compared to SBEACH (Storm-induced BEAch CHange).

• Atmosphere
• /
• 제31권4호
• /
• pp.395-404
• /
• 2021

In order to investigate downslope windstorm by using more detailed observation, we observed 6 cases at 3 sites - Inje, Yongpyeong, and Bukgangneung - during "3-D Meteorological Observation Project in Yeongdong region of Gangwon province, South Korea in 2020." The results from analysis of the project data were as follows. First, AWS data showed that a subsidence inversion layer appeared in 800~700 hPa on the windward side and 900~850 hPa on the leeward side. Second, before strong wind occurred, the inversion layer had descended to about 880~800 hPa. Third, with mountain wave breaking, downslope wind was intensified at the height of 2~3 km above sea level. After the downslope wind began to descend, the subsidence inversion layer developed. When the subsidence inversion layer got close to the ground, wind peak occurred. In general, UM (Unified Model) GDAPS (Global Data Assimilation Prediction System) have had negative bias in wind speed around peak area of Taebaek mountain range, and positive bias in that of East Sea coast area. The stronger wind blew, the larger the gap between observed and predicted wind speed by GDAPS became. GDAPS predicted strong p-velocity at 0600 LST 25 Apr 2020 (4^th case) and weak p-velocity at 2100 LST 01 Jun 2020 (6^th case) on the lee-side of Taebaek mountain range near Yangyang. As hydraulic jump theory was proved, which is known as a mechanism of downslope windstorm in Yeongdong region, it was confirmed that there is a relationship between p-velocity of lee-side and wind speed of eastern slope of Taebaek mountain range.

• Atmosphere
• /
• 제34권2호
• /
• pp.153-176
• /
• 2024

At 0843 UTC 30 May 2021, a commercial aircraft encountered severe turbulence at z = 11.5 km associated with the rapid development of Mesoscale Convective System (MCS) in the Gyeonggi Bay of Korea. To investigate the generation mechanisms of Near-Cloud Turbulence (NCT) near the MCS, Weather Research and Forecasting model was used to reproduce key features at multiple-scales with four nested domains (the finest ∆x = 0.2 km) and 112 hybrid vertical layers. Simulated subgrid-scale turbulent kinetic energy (SGS TKE) was located in three different regions of the MCS. First, the simulated NCT with non-zero SGS TKE at z = 11.5 km at 0835 UTC was collocated with the reported NCT. Cloud-induced flow deformation and entrainment process on the downstream of the overshooting top triggered convective instability and subsequent SGS TKE. Second, at z = 16.5 km at 0820 UTC, the localized SGS TKE was found 4 km above the overshooting cloud top. It was attributed to breaking down of vertically propagating convectively-induced gravity wave at background critical level. Lastly, SGS TKE was simulated at z = 11.5 km at 0930 UTC during the dissipating stage of MCS. Upper-level anticyclonic outflow of MCS intensified the environmental westerlies, developing strong vertical wind shear on the northeastern quadrant of the dissipating MCS. Three different generation mechanisms suggest the avoidance guidance for the possible NCT events near the entire period of the MCS in the heavy air traffic area around Incheon International Airport in Korea.