• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.12
• /
• pp.3960-3969
• /
• 1996

A fluid flow inside a circular cylinder subject to horizontal and circular oscillation is analyzed theoretically. Under the assumption of small-amplitude oscillation, the governing equations take linear forms. The velocity field is obtained in terms of the first kind of Bessel function of order 1. It was found that a particle describes an orbit close to a circle in the central region and an arc near the side wall. We also obtained the Stokes' drift velocity induced by the traveling wave along the circumferential direction. The Eulerian streaming velocities at the edge of the bottom and side boundary layers were also obtained. It was shown that the vertical component of the steady streaming velocity on the side wall is almost proportional to the amplitude of the free surface motion.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.215-216
• /
• 1998

The ultrasonic imaging systems using synthetic aperture beamforming has been formed in the way that one element transmits and then receives a pulse. Because the amplitude of a pulse from one element is too small to propagate a long distance, the SNR(Signal to Noise Ratio)is low. This paper proposes the method to make a circular wave almost equal to one generated by one element using several elements. The amplitude of the wave made up of several elements is much larger than that of one element. And we can improve the SNR.

• Selected Papers of The Society of Naval Architects of Korea
• /
• v.1 no.1
• /
• pp.45-51
• /
• 1993

By using multiple-scale expansion techniques, the Mach reflection of sinusoidally- modulated nonlinear Stokes waves by a stationary thin wedge has been studied within the framework of potential theory. It is shown that the evolution of diffracted wave amplitude can be described by the Zakharov equation to the loading order and that It reduces to the cubic Schrodinger equation with an additional linear term in the case of stable modulations. Computations are made for the cubic Schrodinger equation for different values of nonlinear and dispersion parameters. Numerical results reflect the experimental findings in terms of the amplitude and width of generated stem waves. Based on the computations it is concluded that the nonlinearity dominates the wave field, while the dispersion does not significantly affect the wave evolution.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.05
• /
• pp.167-170
• /
• 1995

A quadrature-channel MODEM using amplitude modulation was constructed. To test the MODEM, 6.4 MHz sinusoidal wave 1 KHz triangular wave were modulated, then the modulated signal was fed into the demodulator, to reconstruct the triangular wave.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1666-1671
• /
• 2004

In this study, a experimental method has been introduced for the various exhaust pipe geometry of 4-stroke single engine. The main experimental parameters are the variation of exhaust pipe diameters and lengths, to measuring the pulsating flow when the intake and exhaust valves are working, As the results of experimental test, the various exhaust geometry were influenced strongly on the exhaust pressure. As the exhaust pipe diameter was decreased, the amplitude and the number of compression wave in exhaust pressure was increased. According to decreasing pipe diameter, the number of compression wave in exhaust pressure was decreased. When the pipe diameter was increase, the second amplitude was increased.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.7
• /
• pp.647-652
• /
• 2016

Guided waves can be used for the inspection of long range pipelines. Surface corrosion is often found as a major defect type in pipelines. The reciprocity relation is a well-established theorem by which one can simplify complicated mathematical expressions. The approach has been already applied to plate and half-space structures to obtain the closed-form solutions of scattered amplitude. However, results for the case of cylindrical structures have not been reported yet. In this paper, the scattering of torsional waves, which is widely used in commercial applications, is explored by the reciprocity theorem approach. Obtaining closed-form solutions of the amplitudes of propagating waves is much simplified by using the reciprocal relation. The scattered amplitudes for elliptical and rectangular defect shapes are calculated with respect to defect depth and width, at frequencies between 0 and 500 kHz. The amplitude shows the periodic result as a function of frequency. The derived closed-form solutions can play a significant role in quantitative signal interpretation.

• Journal of Acupuncture Research
• /
• v.17 no.2
• /
• pp.221-230
• /
• 2000

This study was undertaken to determine effect of Zusan1i(ST36) acupuncture (AP) on the small intestinal motility in the rabbit. Changes in the motility in vivo of ileum was measured before and 20 min. after AP. In order to examine whether AP effect was affected by autonomic nerves, norepinephrine or acetylcholine was applicated. AP significantly increased the mean wave amplitude and motor index, but not the mean wave duration and motor activity. Infusion of norepinephrine ($2{\mu}m$) into an ear vein resulted in a decrease in the mean wave amplitude and motor index, which was not affected by AP. Acetylcholine ($10{\mu}m$) produced inhibition followed by stimulation of motility. The stimulation of motility was induced by an increase in the mean wave amplitude and motor index, but not the mean wave duration and motor activity. The effect of acetylcholine was not significantly different between before and after AP. These results suggest that Zusan1i(ST36) acupuncture stimulates the small intestinal motility, which is not mediated by autonomic nerves. Therefore, Zusan1i(ST36) acupuncture seems to be applicable to impaired small intestinal movement.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.3
• /
• pp.228-233
• /
• 2010

We studied the optical characteristics correlated with low dielectric constants of low-k SiOCH thin films through ellipsometry. The low-k SiOCH thin films were prepared by CCP-PECVD method using BTMSM(Bis-trimethylsilylmethane) precursors deposited on p-Si wafer. The Si-O-CHx, Si-O-Si, Si-CHx, CHx and Si-H bonding groups were specified by FTIR spectroscopic spectra, and the groups coupled with the nano-porous structural organic/inorganic hybrid-type of SiOCH thin films which has extremely low dielectric constant close to 2.0. The structural groups includes highly dense pore as well as ions in SiOCH thin films affecting to complex refraction characteristics of single layer on the p-Si wafer. The structural complexity originate the complex refractive constants of the films, and resulted the elliptical polarization of the incident linearly polarized light source of Xe-light source in the range from 190 nm to 2100 nm. Phase difference and amplitude ratio between s wave and p wave propagating through SiOCH thin film was studied. After annealing, the amplitude of p wave was reduced more than s wave, and phase difference between p and s wave was also reduced.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.423-430
• /
• 2002

A feasibility of a trial test method was evaluated analytically, in which the elastic modulus of a soil deposit was tried to estimate by analyzing dynamic signals measured during conducting the SPT. If there existed a reliable relationship between the impedance ratio of a rod to a soil and the amplitude ratio of a reflected to an incident wave signal at the tip of steel rod contacting the soil surface, it was expected that one could determine the impedance of soil, and then roughly estimate the elastic modulus from the impedance. For a simple rod-soil system, the existence of the relevant relationship was verified in this study by analyzing computed wave signals propagating up and down through the rod. On the basis of these results, thus, a potential of the test method to practical applications could be seen. However, apparent theoretical shortcomings possessed in this approach were also realized since the soil part had an unconfined contact area where contacted with the rod. Therefore, it was concluded that further studies needed to be conducted, in which the reliable theoretical relationship between the impedance and the amplitude ratio as well as the effective contacting soil area contributing to wave reflection should be justified.

• Journal of Industrial Technology
• /
• v.27 no.A
• /
• pp.3-7
• /
• 2007

There are many techniques to calculate the exact position of deep seated tunnel. Especially, tomography method has been used generally in present days. This method has been performed mainly by wave traveltime. Because of short interval of two measuring boreholes, it was very hard to interpret the exact tunnel position. To solve this problem, seismic amplitude method was tried to detect exact pososition of tunnel in this study.