• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 D
• /
• pp.2332-2334
• /
• 2004

A high bandwidth watt-converter, based on an inexpensive, commercially available, standard IC package, is described that covers a frequency ranges from DC to 100 kHz. The new resistive shunt for a wide-band frequency current measurement of the watt-converter was developed. The converter will use application in accurate power measurement under distorted and high frequency conditions. The advantages of the watt-converter are its simplicity, low cost and fast response time.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권10호
• /
• pp.597-601
• /
• 2004

A high bandwidth watt-converter, based on an inexpensive, commercially available, standard IC package, is described that covers a frequency ranges from DC to 100 kHz. The new resistive shunt for a wide-band frequency current measurement of the watt-converter was developed. The converter will use application in accurate power measurement under distorted and high frequency conditions. The advantages of the proposed watt-converter are its simplicity, low cost and fast response time.

• 한국전자파학회논문지
• /
• 제22권8호
• /
• pp.805-808
• /
• 2011

본 논문에서는 220 V의 AC 전원을 공급받아 13.56 MHz의 RF 신호를 출력하는 고효율, 고출력 Class E 전력송신기를 설계하였다. 송신기는 AC-DC 변환기와 class E 전력 증폭기로 구성된다. 설계된 AC-DC 변환기는 220V/60 Hz의 가정용 전원을 공급 받아서 약 290 V의 DC 전압을 출력한다. 이때, AC-DC 변환기는 98.03 %의 매우 높은 변환 효율을 가진다. 변환 효율을 최대로 하기 위하여 별도의 DC-DC 변환기를 사용하지 않고, AC-DC 변환기의 출력 전압을 주 전력 증폭기의 드레인 바이어스 전압으로 사용하였다. 또한, class E 전력 증폭기의 전력손실을 최소화하기 위해 high-Q 인덕터를 제작하였다. 측정 결과, 13.56 MHz에서 동작하는 class E 전력 증폭기는 최대 출력 전력 323.6 Watt에서 84.2 %의 PAE(Power-Added Efficiency)를 가진다. AC-DC 변환기를 포함한 class E 전력 송신기는 323.6 Watt에서 82.87 %의 매우 높은 효율 특성을 나타낸다.

• 전기학회논문지
• /
• 제59권10호
• /
• pp.1845-1849
• /
• 2010

We have proposed and fabricated a Buck-Boost DC to DC Converter for Thermoelectric generator (TEG) with constant output voltage suitable for battery chargers or constant voltage supplies in the range of several watt. The experimental and simulation results have shown that the proposed method allows stable operation with maximum 86% power transfer efficiency. The proposed circuit has a merit in cost and miniaturization of a system compared to conventional MPPT algorithms, because the proposed method adopts only analog circuit without DSP or micro controller unit for calculating peak power point by iterative methods.

• 전력전자학회논문지
• /
• 제7권5호
• /
• pp.443-452
• /
• 2002

수 백 Watt 급의 통신용 장비 등에 적합하도록 고안된, 직렬 연결된 두 개의 트랜스포머를 갖는 새로운 위상천이 풀 브릿지 컨버터를 제시한다. 제안된 회로의 장점은 넓은 입력 범위를 가지며, 경부하에서도 스위치의 영전압 조건을 보다 쉽게 만족시킬 수 있다는 점, 그리고 작은 출력 변동율을 갖는다는 점 등이다. 뿐만 아니라, 직렬로 연결된 두 개의 트랜스포머가 번갈아 가면서 주 트랜스포머로서의 역할과 출력 인덕터로서의 역할을 함께 수행하므로, 출력측에서는 인덕터없이 필터링이 가능하게 되고, 따라서 고전력밀도의 컨버터를 제작할 수 있게 된다. 모드 해석과 대신호 모델링을 통한 설계식의 유도, 그리고 실험 결과를 보여줌으로써 제안된 컨버터를 검증한다.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권4호
• /
• pp.185-192
• /
• 2005

This paper proposes a DRMS(Distribution Remote Management System) which can enhance highly the economics of automatic metering system and the power quality supplied to the electric customer improving the efficiency of the meter reading, voltage management and load management work by realizing the remote meter reading, the remote voltage management and the remote load management based on the ADWHM(Advanced Digital Watt Hour Meter). The DRMS is designed so that the voltage management and load management work in remote site can be processed by collecting the voltage pattern and current pattern as well as watt hour data from all ADWHMs one time every month regularly or from special ADWHMS several time irregularly, A new on-line voltage and load management strategy based on the ADWHM is designed by analyzing the existing voltage management and load management process. Also, DRMS is designed so that watt-hour data, voltage pattern data, load pattern data and power factor data can be collected selectively according to the selection of user to assist effectively the methodology. Remote management program and database of the DRMS are implemented based on Visual C++, MFC and database library of MS. Also, DRMS is designed so as to communicate with the ADWHM using RS232C-TCP/IP converter and ADSL. The effectiveness of the remote metering function is proven by collecting and analyzing the data after ADWHMs installed in any site. The developed strategy and program also is verified through the simulation of voltage management and load management.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2789-2791
• /
• 1999

This paper deals with the design of the HPS electronic ballast, which consists of the ignitor for turning-up and the resonant converter for driving the lamp. Also it contains Power Factor Controller to improve the electronic efficiencies such as power factor, crest factor, low distortion, etc. To make this circuit, it is necessary to simulate it on the computer before we implement it actually. In this paper, we try to modelize the HPS lamp and ballast, and have experiments with 150 watt-HPS lamp from Kwangjunsa.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2000년도 학술대회논문집
• /
• pp.107-110
• /
• 2000

This paper deals with the design of the electronic ballast for high pressure sodium lamp, which consists of the ignitor and the resonant converter for driving the lamp. Also it contains PFC(Power Factor Controller) to improve such as power factor, low distortion etc. In this paper, we design the electronic ballast for the 150 watt high pressure sodium lamp.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.459-462
• /
• 2005

Recently, the PDP is the most remarkable media for a next generation display device. But the PDP is a high power consumption device. It is to required a high efficiency power supply. We reported the experimental result the high efficiency PDP power supply for 550w class. The proposed converter is quasi-resonant flyback topology, it achieves soft-switching in the single-switch flyback converter. As a result, we realize to very high efficiency power supply for PDP of 95% at 400v dc input and 550Watt output.

• 산업기술연구
• /
• 제31권A호
• /
• pp.103-107
• /
• 2011

In this paper, a method is proposed to improve power factor and the input current THD in LED driver circuit. The researched circuit consists of a valley-fill circuit and boosting inductor and a Buck converter. Valley-fill circuit is a passive PFC and simplified structure, the buck converter is operated with current feedback. The switching frequency is 50KHz in LED driver circuit and LED forward current is constant. A valley-fill type PFC circuit for LED driver(15Watt) has been implemented, and the validity of proposed method is shown by is simulation and experimental result.