• 한국의류산업학회지
• /
• 제3권4호
• /
• pp.357-361
• /
• 2001

This paper is concern with the effect of various conditions on mechanical properties of textile fabrics by water soluble resin treatment. Resin treatment of cotton, acetate, viscose rayon, polyester, nylon and acryl fabrics were made by aqueous resin treatment to improve the mechanical properties. The mechanical properties of fabrics, the breaking strength and strain were measured and surface reflectance was measured by color eye. The breaking strength and surface reflectance of fabrics by water soluble resin treatment showed difference by the different treatment concentration. The surface reflectance was increased by water soluble resin treatment. The breaking strength was lower in fabrics with resin treatment than fabrics with none treatment.

• Journal of the Korean Wood Science and Technology
• /
• 제24권4호
• /
• pp.47-55
• /
• 1996

UV transmission spectra of water-soluble acrylic resin films containing hydroxybenzophenolic, hydroxyphenylbenzotriazolic UV absorber and HALS(hindered amine light stabilizer) were investigated by exposure time(before exposure weathered for 160 and 320hours) in QUV Weather-Ometer. Also the YID(yellowness index difference), LID(lightness index difference) and CD(color difference) of dried water-soluble acrylic resin films and the coated woods of Larix leptolepis were analyzed by addition level of UV absorber(0, 1, 2 and 3%) and HALS(0, 0.5, 1 and 1.5%) and by exposure time in QUV Weather-Ometer. They showed no significant effects on UV transmission spectra of dried water-soluble acrylic resin films in the range of 300 to 400nm irrespective of exposure time. However, UV transmission decreased as increase of exposure time. UV transmission spectra were lower in dried water-soluble acrylic resin films containing hydroxybenzophenolic UV absorber and HALS than in these containing hydroxyphenylbenzotriazolic UV absorber and HALS in the range of 350 to 400nm. The least YID, LID and CD in the coated woods of Larix leptolepis appeared at the addition level of 3%, based on non-volatile content, in hydroxybenzophenolic and hydroxyphenylbenzotriazolic UV absorber, and of 1.5% in HALS to water-soluble acrylic resin.

• 한국인쇄학회지
• /
• 제20권1호
• /
• pp.16-27
• /
• 2002

Recently, the attraction for water-based ink is increasing, Because Solvent ink, based on organic solvent, cause bad effect on environment and rise the cost. Instead of organic solvent that cause environment pollution as well as cost-rise by rise of petroleum price, Binder based on alkali-soluble resin is popular and studied by many other country. However, in domestic, research and development for alkali-soluble resin is not like, because of lack of understanding environmental pollution and safety, therefor alkali-soluble resin development and research for the properties of the water-based ink used by alkali-soluble resin is not study very well. In this paper, we studied dispersion of carbon black in acrylic resin solution and the properties of water-based ink used by carbon black and acrylic binder.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.527-528
• /
• 2012

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.655-656
• /
• 2011

• Journal of the Korean Wood Science and Technology
• /
• 제43권3호
• /
• pp.327-333
• /
• 2015

진공가압 수지함침 처리에 의한 목재의 치수안정화 정도를 측정하기 위하여 침엽수 3수종에 수용성 멜라민 수지를 수지농도와 처리시간별로 처리한 후, 수지함침 열압축목재(compreg)를 제조한 다음 치수안정성 개선효과를 검토하였다. 수지농도가 높고 처리시간이 길수록 용적 수축률과 항용적 팽윤율은 증가하였으나, 용적 팽윤율, 항용적 수축률 및 흡수성은 감소하였다. 또한 중량 증가율은 수지의 농도가 높을수록 현저히 증가하였으나 처리시간과는 일정한 관계가 없었다.

• Journal of the Korean Wood Science and Technology
• /
• 제43권6호
• /
• pp.792-797
• /
• 2015

진공가압 수지함침 처리에 의한 목재의 휨강도, 경도 및 내마모성 향상을 위하여 침엽수 3수종에 수용성 멜라민 수지를 수지농도와 처리시간별로 진공가압 처리한 후 수지함침 열압축목재(compreg)를 제조한 다음 물성을 검토하였다. 또한 같은 수종에 수용성 난연제를 도포처리하는 방법과 진공가압 후 열압처리 방법으로 제조한 다음 난연성 향상정도를 측정하였다. 수지의 농도가 높을수록 휨강도 및 브리넬 경도는 증가하였고 내마모성은 향상되었으나, 처리시간과는 일정한 경향이 없었다. 난연성은 도포시험편 보다 진공가압처리 시험편이 총 방출열량이 감소하여 진공가압처리에 의한 난연성 개선 방법이 효과가 있었다.

• 한국응용과학기술학회지
• /
• 제28권1호
• /
• pp.35-47
• /
• 2011

For the synthesis of water soluble acrylic modified epoxyester resin, fatty acid/epoxy ratio of 50/50 was used, and introduced maleic anhydride. Ratio of styrene/acrylic acid of acrylic monomers was fixed 85/15 and ratio of epoxyester/acrylic monomer was controlled 80/20, 75/25, 70/30, 65/35, and degree of neutralization were changed 65%, 80%, to 100%. As a result, 40% solids acrylic modified epoxyester resins were synthesized. Resins were evaluated water soluble stability, drying time, water resistant, storage stability and physical properties. And the white paints were prepared, and were evaluated viscosity, drying time, water resistance, adhesion, sagging, spray workability, gloss, salt spray resistance, skinning, whiteness and flash rust. As a result, the degree of neutralization of 100% and the ratio of epoxyester/acrylic monomer of 75/25 showed the best properties.

• 공업화학
• /
• 제28권4호
• /
• pp.437-441
• /
• 2017

본 연구에서는 방화용 실란트의 첨가제로 사용되는 팽창흑연의 부피팽창률과 경도특성을 개선하기 위해 팽창흑연에 다양한 수지를 코팅한 후 그 특성을 고찰하였다. 수지의 코팅률을 나타내는 평균코팅두께는 수지의 건조속도와 점도의 영향으로 초산비닐계수지 > 아크릴수지 > 우레탄수지 > 수용성라텍스의 순으로 크게 나타났다. 또한 수지의 종류에 따라 코팅된 팽창흑연의 부피팽창률은 우레탄수지 > 수용성라텍스 > 아크릴수지 > 초산비닐계수지의 순으로 컸으며, 경도는 초산비닐계수지 > 아크릴수지 > 수용성라텍스 > 우레탄수지의 순으로 증가함을 알 수 있었다. 이는 코팅처리를 하지 않은 팽창흑연에 비해 부피팽창률은 감소하나 경도가 현저하게 증가되어 방화첨가제로 사용이 가능함을 알 수 있었다. 반응표면분석법에 의한 최적화실험 결과 아크릴수지의 최적코팅 조건은 수지의 첨가량 37.6 wt%과 코팅 교반속도 441.4 rpm이었다.

• 한국염색가공학회지
• /
• 제12권1호
• /
• pp.61-67
• /
• 2000

This study was carried out to develope antimicrobial artificial suede by coating with water soluble polyurethane resin and the copolymer of N,N'-dialkyl-N,N'-dialkyl ammonium chloride (DADAAC) and acrylamide as a antimicrobial additve. The copolymer of DADAAC and acrylamide was synthesized by free radical initiation and intra-intermolecular propagation, and the prepared copolymers had sufficient compatibility with water soluble polyurethane resin. The MIC values of the prepared copolymers and antimicrobial characteristics of the artificial suede coated by polyurethane were evaluated. With the increase in the proportion of DADAAC, which is antimicrobially active part in the DADAAC/acrylamide copolymers, the MIC value becomes lower. The MIC value of DADAAC-AA (1 : 1) copolymer is below 30 ppm against S. aureus, and below 90 ppm against K pneumoniae. The artificial suede coated by water soluble polyurethane resin with 1.0% owl concentration of DADAAC/acrylamide copolymer has good antimicrobial fastness as to show colony reduction of above 90% and 80% against S. aureus and K. pneumoniae respectively in the shake flask test after 10 times of washing, and above 95% and 85% after 10 times of dry-cleaning. The elastic recovery of coated suede fabric is not affected up to 1.0% owf concentration of DADAAC-AA copolymer in the polyurethane coating.