• 전기학회논문지P
• /
• 제63권2호
• /
• pp.119-123
• /
• 2014

In this study, four kinds of specimens of PE(polyethylene)-based insulating materials were prepared for selecting the optimum insulation materials in a wet environment. The specimens were tested by various methods, the anti tracking test, the transmittance test in the water vapor transmittance(WVT) and the abrasion resistive test, etc. The HDPE(high-density polyethylene) specimen was showed excellent property in the tracking resistance test and the lowest transmittance in water vapor transmittance test. In the abrasion resistive test, the LLDPE(linear low-density polyethylene) and MDPE(medium-density Polyethylene) were showed excellent mechanical properties. The value of cut-through resistance for MDPE and HDPE were superior to that for LLDPE and LDPE(low-density polyethylene).

• 한국의류학회지
• /
• 제41권1호
• /
• pp.84-97
• /
• 2017

Water vapor and thermal transmission properties of high emotional garments are important to evaluate wear comfort; in addition, the measuring methods of these properties are also critical for breathable and warm suit fabrics. In this study, the water vapor and thermal properties of composite yarn fabrics made of CoolMax, Tencel, and Bamboo fibers with filaments were measured and compared according to the measuring method. Water Vapor Transmittance (WVT) of the fabric woven by the sheath/core composite yarn in the warp direction was the highest due to the small staple fiber volume in the sheath/core yarn structure and high air voids in the sheath/core yarn fabrics. This property was also the highest in fabrics woven by bamboo staple yarns in the weft direction, and was the lowest on hi-multi filament fabrics. However, water vapor resistance ($R_{ef}$) of these fabrics by KSK ISO 11092 showed the opposite results to the water vapor transmittance method ($CaCl_2$ method); in addition, its correlation coefficient was low. The correlation coefficient between $R_{ef}$ and the drying rate was 0.719; therefore, the measurement mechanism of $R_{ef}$ is analogous to the drying property measurement. The thermal conductivity of the fabrics woven with compact staple yarn showed a high value; however, the hi-multi filament fabric showed low thermal conductivity. Therefore, fiber characteristics affect thermal properties more than yarn structure. The correlation between thermal property and moisture transport was also low. This study showed that: water vapor transmittance was active at the loose yarn structure, dry heat transport was vigorous at the compact yarn structure, and heat transport was affected more by fiber characteristics than yarn structure. In conclusion, sheath/core composite yarns were relevant to the high absorptive cool suit along with siro-fil and CoolMax/Bamboo staple yarns that were relevant to the heat diffusive cool suit.

• 공업화학
• /
• 제29권4호
• /
• pp.484-487
• /
• 2018

본 논문에서는 유기전자소자에서 사용되는 수분 차단막의 투습도 분석을 위하여 ytterbium의 광학적 전기적 특성을 연구하였다. Ytterbium 박막은 다양한 성막 두께(20-100 nm)에 따라 넓은 범위의 광투과도(70-10%)와 비저항($6.0-0.16m{\Omega}{\cdot}cm$) 값을 나타내었다. 25 nm의 ytterbium 박막은 수분과 반응하여 산화되며 투과도와 저항이 실시간으로 변화하였고 이를 통해 parylene 고분자와 aluminum nitride 적층형 박막 봉지 필름을 분석한 결과 $4.3{\times}10^{-3}g/m^2{\cdot}day$의 투습도를 측정할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.303.1-303.1
• /
• 2016

Polymer-like amorphous carbon films were deposited on polyethylene naphthalate (PEN) substrate by plasma-enhanced chemical vapor deposition (PECVD) and their water vapor transmission rates (WVTR) were tested. propane was used as precursors. To make a polymer-like amorphous carbon film the deposition rate, surface roughness, light transmittance, and WVTR of the films were characterized as a function of the precursor feed ratio and plasma power. The water vapor transmission rates of bare PEN film and single layer PAC on PEN substrate were 6.95 g/m2/day and 0.3 g/m2/day, respectively. The superior property the water vapor permeability of thin layers of PAC was attributed to uniform coverage and good adhesion between PAC film and PEN substrate.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1989년도 춘계학술대회
• /
• pp.7-8
• /
• 1989

The graft copolymer of chitosan with amino acid, L-lysine was synthesized by heterogeneous copolymerization and was evaluated as an artificial skin. The mechanical properties under dry and wet state, water content, water vapor transmittance rate and biodegradability were measured. The tensile strength and elongation under wet state ranged $0.3-0.5\;kg/mm^2$, 10-13%, respectively. Water vapor transmittance rate ranged $450-500\;g/m^2{\cdot}day$ like that of the normal skin. The weight loss of prepared membrane by protease IV was measured for the degree of biodegradation. The degree of biodegradation was around 15% and after 4 days it was slow. Biocompatibility was evaluated by studying the attachment of human fibroblast on the prepared membrane surface.

• 대한원격탐사학회지
• /
• 제39권6_2호
• /
• pp.1591-1604
• /
• 2023

해색 원격탐사에서 대기 보정은 자료의 정확도와 신뢰성 확보를 위해 반드시 수행해야하는 과정으로 높은 정확도가 요구된다. 또한 최근 원격 탐사 커뮤니티에서는 위성 자료의 오차에 대한 요구 사항이 증가함에 따라 대기 보정의 보조 자료로 사용되는 기상 변수(오존량, 기압, 바람장, 층적분 수증기량[total precipitable water, TPW])의 오차에 의해 발생하는 원격 반사도(remote sensing reflectance, R_rs)의 오차에 대한 연구가 진행되고 있지만 오차 요인으로 알려진 수증기 프로파일의 변동성에 의한 R_rs의 오차에 대한 연구는 수행되지 않았다. 본 연구에서는 Second Simulation of a Satellite Signal Vector version 2.1 모의를 통해 GOCI-II 관측 영역 내의 수증기 프로파일의 변동성에 따른 수증기 투과도의 오차를 계산하고 이로 인해 발생하는 해색 산출물의 오차에 대해 분석하였다. Radiosonde 관측 수증기 프로파일은 그 형태가 복잡할 뿐만 아니라 지표 부근의 큰 변동성으로 인해 기존 GOCI-II 대기 보정에서 사용하고 있는 US standard 62 수증기 프로파일과의 차이가 최대 0.007만큼 발생하였다. 이로 인해 발생한 수증기 투과도의 차이는 GOCI-II 대기 보정에서 에어로졸 반사도 추정의 차이를 발생시키고, 결과적으로 모든 밴드에서 R_rs의 오차가 발생하였다. 하지만 412-555 nm 밴드에서 수증기 프로파일 차이로 인한 R_rs 오차는 요구 정확도보다 낮은 2% 미만으로 나타났으며, 다른 해색 산출물인 클로로필(chlorophyll-a) 농도, 용존 유기물, 총 부유물 농도에서도 유사한 오차를 보이고 있다. 본 연구의 결과는 대기 보정 및 해색 산출물의 정확도에 있어 수증기 프로파일의 차이의 영향이 적다는 것을 의미한다. 하지만 추후 연구에서 수증기 흡광 보정 시 수증기 프로파일의 변동성을 고려할 경우 보다 높은 수준의 R_rs 정확도 확보를 기대할 수 있다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.516-516
• /
• 2013

Flexible Display를 제작하기 위해서는 유기소자를 보호하는 보호막이 필요하다. 유기소자는 산소 및 수분에 매우 취약하기 때문에 장수명을 확보하기 위해서는 추가적인 보호층이 필요하다. 본 논문에서는 이를 위해 Encapsulation 중 한 방법인 Barrier Film을 제작하고 그에 따른 광학적인 특성 및 수분 투습율을 조사하였다. Barrier film의 광학적 분석 방법으로는 XPS, SEM, AFM, Transmittance를 측정하였으며, XPS는 박막내의 화학적인 결합을 알기 위해서 사용되었고, SEM은 박막의 두께 및 박막내의 결함을 파악하고자 하였다. SEM을 통해 증착속도가 32.6 nm/m이라는 것을 관찰할 수 있었다. AFM을 통해 증착된 박막의 표면 거칠기를 파악하였다. Transmittance는 PET 기판을 사용하여 가시광 영역에서 80%이상의 투과도를 나타내었다. PECVD 장비를 사용하여 SiH4, NH3, N2가스를 사용하여 PET 필름 위에 박막을 증착하였으며, 유량을 10~400 sccm 내에서 변화시키고, RF Power는 각각 30~300 W 15분간 증착하였다. 제작된 보호막의 수분투습율은 $2{\times}10{_2}^{-2}g/m^2/day$ 이하의 값을 나타내었다.

• Carbon letters
• /
• 제15권1호
• /
• pp.50-56
• /
• 2014

We prepared ethylene vinyl alcohol (EVOH)/graphene oxide (GO) membranes by solution casting method. X-ray diffraction analysis showed that GOs were fully exfoliated in the EVOH/GO membrane. The glass transition temperatures of EVOH were increased by adding GOs into EVOH. The melting temperatures of EVOH/GO composites were decreased by adding GOs into EVOH, indicating that GOs may inhibit the crystallization of EVOH during non-isothermal crystallization. However, the equilibrium melting temperatures of EVOH were not changed by adding GOs into EVOH. The oxygen permeability of the EVOH/GO (0.3 wt%) film was reduced to 63% of that of pure EVOH film, with 84% light transmittance at 550 nm. The EVOH/GO membranes exhibited 100 times better (water vapor)/(oxygen) selectivity performance than pure EVOH membrane.

• 한국포장학회지
• /
• 제26권3호
• /
• pp.125-131
• /
• 2020

Carrageenan-based functional films were prepared by adding two different types of sulfur nanoparticles (SNP) synthesized from sodium thiosulfate (SNPSTS) and elemental sulfur (SNPES). The films were characterized using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction spectroscopy (XRD), and thermal gravimetric analysis (TGA). Also, film properties such as UV-visible light transmittance, water contact angle (WCA), water vapor permeability (WVP), mechanical properties, and antibacterial activity were evaluated. SNPs were uniformly dispersed in the carrageenan matrix to form flexible films. The addition of SNP significantly increased the film properties such as water vapor barrier and surface hydrophobicity but did not affect the mechanical properties. The carrageenan/SNP composite film showed some antibacterial activity against foodborne pathogenic bacteria, L. monocytogenes and E. coli.

• 한국전기전자재료학회논문지
• /
• 제22권3호
• /
• pp.262-268
• /
• 2009

We investigated the properties of inorganic diatomic films like silicon oxide ($SiO_2$) and zinc oxide (ZnO) and their composite films are packed as a passivation layer around Ca cells on glass substrates by using an electron-beam evaporation technique and rf-magnetron sputtering method. When these Ca cells are exposed to an ambient atmosphere, the water vapor penetrating through the passivation layers is adsorbed in the Ca cells, resulting in a gradual progress of transparency in the Ca cells, which can be represented by changes of the optical transmittance in the visible range. Compared with the saturation times for the Ca cells to become completely transparent in the atmosphere, the protection effects against permeation of water vapor are estimated for various passivation films. The thin composite films consist of$SiO_2$ and ZnO are found to show a superior protection effect from water vapor permeation compared with diatomic inorganic films like $SiO_2$ and ZnO. Also, this inorganic thin composite films are also found that their protection effect against permeation of water vapor can be significantly enhanced by choosing their suitable composition ratio and deposition method, in addition, the main factors affecting the permeation of water vapor through the oxide films are found to be the polarizability and the packing density.