• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.52-53
• /
• 2018

As a result of exposing the concrete at 1 and 6 atm in order to evaluate the salt resistance of the pressurized marine concrete, the pressure resulted in promoting the chloride ion penetration of the concrete. Particularly, the amount of water soluble chloride in the surface area tends to increase rapidly, and this cause is considered to be highly correlated with the size of the capillary pores of the concrete. On the other hand, the blending of blast furnace slag was effective to increse chloride attack resistibility even under the pressure.

• YAKHAK HOEJI
• /
• v.27 no.4
• /
• pp.303-307
• /
• 1983

Pipethanate*HCl reacts with ammonium cobaltothiocyanate to form a stable ion pair which has an absorption maximum at 626nm. The reaction product was insoluble in water but freely soluble in most organic solvents. 1, 2-Dichloroethane was the best extracting solvent among the several organic solvents. Pipethanate*HCl can be determined not only by the spectrophotometry but also inderectly by estimation of cobalt in the organic phase by atomic absorption spectrophotometry. Linear relationship was found between absorbance and concentration in the range of $1.0{\times}10^{-3}~4.0{\times}10^{-3}M$ by spectrophotometry and $1.5{\times}10^{-4}~4.0{\times}10^{-4}M$ by atomic absorption spectrophotometry. With this method it was possible to determine pipethanate$\cdot$HCl in the pharmaceutical preparations.

• The Korean Journal of Food And Nutrition
• /
• v.24 no.3
• /
• pp.414-421
• /
• 2011

시중에 유통 중인 영양보충용 제품의 수용성 비타민 $B_1$(thiamin), $B_2$(riboflavin), $B_3$(nicotinic acid and nicotine amide), $B_6$(pyridoxine), C(ascorbic acid)의 신속한 동시분석 방법을 확립하기 위하여 본 연구를 실시하였다. 영양보충용 제품은 정제, 연질캅셀, 분말, 액상의 4가지 제형에 대해 27종의 제품을 구입한 후, Ion-pair 분리기법을 사용하여 HPLC-UVD를 이용한 동시분석 방법을 검토하였다. 비타민 $B_1$, $B_2$, $B_3$, $B_6$, C의 HPLC에 의한 동시분석 조건을 검토한 결과, 이동상은 0.02% triethylamine, 17.5% 메탄올, $5{\mu}M$ sodium hexanesulfonic acid가 함유된 pH 3.5(acetic acid로 조절)의 수용액을 사용하였고, 용출시간은 다른 피크의 영향을 받지 않도록 30분으로 하였다. 수용성 비타민의 회수율은 96% 이상이었다. 본 연구에 의해 확립된 수용성 비타민의 동시분석 조건은 검량선의 직선성, 정밀성, 정확성, 기기적합성 등이 USP 및 ICH 기준에 적합하여 HPLC의 동시분석 방법으로 합당하였다. 수용성 비타민의 추출 용매는 제형에 따라 약간의 차이를 보이긴 했으나, 물이나 산성조건을 갖춘 HPLC의 이동상이 에탄올이나 메탄올보다 높은 추출 효율을 보였다. 초음파 추출기에 의한 추출 시간은 20분이 가장 적당하였다. 본 연구의 결과는 수용성 비타민의 신속한 추출 및 분석에 매우 효율적으로 이용될 것으로 기대된다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.5
• /
• pp.519-523
• /
• 2002

Soluble polysaccharide (SP) from green layer, Enteromorpba prolifera was extracted 3 times with distilled water at 100$^{\circ}C$ for 2 hrs and fractionated with cetylpyridinium chloride (CPC) and ion exchange chromatography (DEAE Separose CL-6B). The SP amounted to $23.7\%$ of the dry seaweed weight and contained $68.8\%$ carbohydrate. It was mainly constituted of rhamnose, glucose, xylose, sulfate and uronic acid and was fractionated with CPC into three (CPC-S, CPC-PS, CPC-PP) tractions. The major acid fraction CPC-PS accounted for $10.2\%$ of the dry algal weight. CPC-PS was further fractionated on DEAE Sepharose CL-6B into Fr-1 ($8.0\%$), Fr-2 ($35.8\%$), Fr-3 ($23.7\%$) fractions. The Fr-3 fraction contained $2.2\%$ protein, $21.4\%$ sulfate, $15.3\%$ uronic acid, and $72.4\%$ polysacchnrides composed of rhamnose, xylose and glucose. The Fr-2 fraction, which was richer in uronic acid ($17.5\%$) and poorer in sulfate ($19.0\%$) and total sugar ($68.8\%$) than the Fr-3, had a sugar composition close to that of Fr-3. The average molecular weights of Fr-2 and Fr-3 were 510,000 and 830,000 daltons, respectively. Fr-3 turned out to be homogeneous by cellulose acetate electrophoresis.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.1
• /
• pp.82-89
• /
• 1998

Partial hydrolyzing condition for low-molecularized alginate and rheological properties such as viscosity, solubility, emulsitying ability, oil absorption capacity, bile acids binding and metal ion binding of the low-molecularized alginates from the sea mustard ( Undaria pinnatifida) and giant kelp (Macrocystis pyrifera) were investigated. Alginate from sea mustard was regularly hydrolyzed with the increase of HCl concentration in the range of 0.2 N to 0.5 N and with the prolonged reaction time at $100^{\circ}C$. The molecular weight of alginate was decreased to a part of 100 after hydrolysis for 50 min with 0.3 N HCl. The ratio of mannuronate to guluronate was increased with the acid hydrolysis and total yield was estimated to be $75\%\~80\%$. Low-molecularization of alginate was featured in the apparent decrease of viscosity, whereas solubility, emulsifying ability, and bile acids binding ability were increased with the low-molecularization. Oil absorption capacity of the acid$\cdot$alkali soluble alginate was slightly higher than that of the water soluble alginate. Metal ion binding capacity was the highest in acid$\cdot$alkali soluble alginate, and decreased with the low-molecularization.

• Journal of the Korean Ceramic Society
• /
• v.31 no.10
• /
• pp.1218-1230
• /
• 1994

In manufacturing process of porous glass-ceramics by the filler method, the sintering behaviour of crystallizable glass powder mixed with various salts was studied and also the effects of precipitated crystal phases on the properties of porous glass-ceramics were investigated. Fine-grained crystallizable glass powder was homogeneously mixed with various slat having grain size 100~200 ${\mu}{\textrm}{m}$ and sintered for densification. After washing out the inorganic salt with distilled water, the porous sintered body was heat treated additionly for crystallization. The MgO-Al2O3-SiO2 base glass was used as crystallizable glass powder and the water soluble salts such as K2SO4 and MgSO4 were used as filler. When K2SO4 was used, leucite crystal phase was formed as a result of the ion exchange and porous glass-ceramics which exhibit high temperature resistance and high thermal expansion coefficient of 17$\times$10-6/$^{\circ}C$ could be obtained. On the contrary, when MgSO4 was used, only slight ion exchange is observed and $\mu$-cordierite and $\alpha$-cordierite crystal phases were formed and porous glass-ceramics which exhibit low thermal expansion coefficient schedule were determined with the results of DTA curves, thermal shrinkage curves and XRD patterns analysis. From DTA curves and thermal shrinkage curves, it was found that the sintering densification have been completed at the temperature range of exothermic peak for crystallization. The pore size distributions and pore diameters were measured by mercury porosimeter. The pore diameter of porous glass-ceramics was 10~15 ${\mu}{\textrm}{m}$ when 100~200${\mu}{\textrm}{m}$ grain size of K2SO4 was used and it was 25~30 ${\mu}{\textrm}{m}$ when the same grain size of MgSO4 was used. The porous glass-ceramics K2SO4 used shows bimodal pore size distribution and its porous skeleton structure was ascertained by SEM observation.

• Journal of Sericultural and Entomological Science
• /
• v.17 no.1
• /
• pp.1-26
• /
• 1975

These studies were attempted to find out the optimum silk reeling system by use of automatic silk reeling machine to increase raw silk yield and reeling efficiency with various silk reelable cocoons. The obtained results are as follows; 1. The mean silk reelability ratio(X)of the Korean cocoons during the last ten years was 61 per cent, beside 64.7 per cent in autumn cocoon and 57.3 per cent in spring cocoon. However, the ratio variation of autumn cocoons was larger than that of spring cocoons. 2. A positive correlation between cocoon filament breaks during its process and silk reelability levels was shown to be significant. The cocoons of both poor and good reelability evidenced "J" shape distribution on the filament break graph by the order of reeling cocoon end. Many bave breaks were found at the inner shell of the cocoons, or in case of poor reelability cocoons. 3. The morphology of broken cocoon ends during the process was classified into A, B, C, D, E and F types, The occurrence of B type was majority, but that of F type was minority among them. 4. In case of the cocoon cooking, H-type ion-exchanged soft water was better for good reelability cocoons, Na and H-type ion exchanged neutral soft water for those of fair reelability, and alkaline (Na-type) soft water for those of poor reelability, respectively. 5. The modification of cooking water by mixing the above different types of water (50％ Na-type and 50％ H-type passed by standard natural water; 75％ Na-type and 25％ H-type passed by hard natural water; 25％ Na-type and 75％ H-type passed by soluble natural water) made higher yield of raw silk with tess breaks of thread. 6, In case cocoon ends groping water included sodium hexametaphosphate as much as 800 ppm. the groping efficiency and raw silk yield of cocoon was improved. The effect was pronounced in case of poor reelability cordons. 7. The most reasonable cocoon cooking and silk reeling condition for automatic silk reeling process were observed to be rather incomplete cook with good reelability cocoons and optimum cook with poor reelability cocoons succeeded by the reeling bath temperature of 45$^{\circ}C$, 8. The reasonable silk reeling velocities were observed to be about 150m per min. for good reelability cocoons, 120m per min. for fair reelability ones and 90 to 120m per min. for poor reelability ones. 9. In order to improve the raw silk yield of cocoons and reeling efficiency, the cocoon stand-by-ratio for reeling should be kept at the level of 40 per cent for good reelability cocoons or at 60 per cent for poor reelability ones beside necessary end found cocoon condition.

• Journal of environmental and Sanitary engineering
• /
• v.7 no.1
• /
• pp.1-16
• /
• 1992

Corrosion of pipes Is one of the most serious problems in the maintenance of water worlds. Corrosion is promoted not only by physical factors such as temperature, but also by electrochemical factors including concentration of soluble metal ions, chlorine ion, pH, DO and microorganisms. Corrosion products also affect corrosion rate. In this research, study results are summarized as follows ; 1) Corrosion test was performed for 4 weeks at $70^{\circ}C$, pH 7.0 with specimens of 4 types of metal materials used as service pipes. Corrosion rate and S.E.M were analyzed. The results were showed that corrosion 1.ate of carbon steel pipe was 4.10~5.22 $mg/\textrm{cm}^2$ . week, galvanized steel pipe 0.98~1.34$mg/\textrm{cm}^2$. week, Copper pipe 0.02~0.04$mg/\textrm{cm}^2$. week, stainless steel pipe 0.05~ 0.10$mg/\textrm{cm}^2$ . week. 2) When corrosion rate was tested for tile types of pipes at pH 7 and both $25^{\circ}C$ and $75^{\circ}C$, avaerage corrosion rate for 6 weeks at $25^{\circ}C$ Ivas 2.26$mg/\textrm{cm}^2$ . week in carbon steel pipe, 1.99$mg/\textrm{cm}^2$. week in galvanized steel pipe, 0.26 $mg/\textrm{cm}^2$. week in stainless steel pipe. At $87^{\circ}C$, average corrosion rate for 4 weeks u.3s 4.56 $mg/\textrm{cm}^2$. week in carbon steel pipe,

• Journal of Korean Society on Water Environment
• /
• v.22 no.1
• /
• pp.30-36
• /
• 2006

This study was carried out to evaluate the performance of Modified Ludzsck Etinger (MLE) process with waste oyster shell media in aerobic tank. Influent flow was 36 L/d and the order of reactor was anoxic, aerobic and sedimentation tank and unit hydraulic retention time was 2 hr, 6 hr and 4 hr, respectively. Sludge recycling rate in sedimentation tank and internal recycling rate were 100%. Media fill rate in aerobic tank was 5%, 10% and 17% and fluid MLSS concentration in aerobic tank was 3000~4000 mg/L. Average TCOD removal rate was 91~93%, TBOD 92~96%, SS 95~96% and when media fill rate was 10% or more, in organic compound removal it could satisfy with wastewater discharge standard. Average total nitrogen removal rate was 70~76% and average total phosphorous removal rate was 58~65%. With media fill rate increasing, total phosphorous average removal rate also increased. For it was that released calcium ion from waste oyster shell reacted with soluble phosphorous. From these experiment results, the MLE process using waste oyster shell as media is a practical method for advanced sewage treatment in rural area.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.2
• /
• pp.168-180
• /
• 2011

The variation of the physicochemical properties of atmospheric aerosols in coexistence of the heavy Asian Dust and Haze observed from $15^{th}$ to $17^{th}$ March 2009 in Seoul was scrutinized through the mass and ion concentration observations and synoptic weather analysis. Although the ratio of PM1.0/PM10 was constant at 0.3 (which is typical during Asian Dust period in Korea) during the measurement period, both PM10 and PM1.0 mass concentrations were 3~6 times and 2~4 times higher than that of clear days, respectively. Water-soluble ion components accounted for 30~50% of PM10 and 50~70% of PM1.0 mass concentration. One of the secondary pollutants, $NO_3^-$ was found to be associated with $Ca^{2+}$ and $Na^+$ in coarse mode indicating that the aerosol derived from natural source was affected by anthropogenic pollutants. While the acidity of the aerosols increased in fine mode when the stagnation of weather patterns was the strongest (March $16^{th}$), the alkalinity increased in coarse mode when new air masses arrived with a southwestern wind after ending a period of stagnation (March $17^{th}$). In the selected case, SOR (Sulfur Oxidation Ratio, $nSO_4^{2-}/[nSO_4^{2-}+nSO_2]$) and NOR (Nitrogen Oxidation Ratio, $nNO_3^-/[nNO_3^-+nNO_2]$) values of ion components were higher than the general values during Asian Dust period. These results imply that dust aerosols could be mixed with pollutants transported from China even in heavy Asian Dust cases in Korea.