• Proceedings of the Korea Water Resources Association Conference
• /
• 2003.05b
• /
• pp.1015-1018
• /
• 2003

• Journal of the Korean housing association
• /
• v.5 no.1
• /
• pp.85-90
• /
• 1994

Using water in each apartment is influnced by several facters including the income level of inhabitants, the manner of life, the area apartments and climate. The automization of santory machines or facilites in recently bulit apartements has caused largely increases in amount of water use. Therefore the design for water supply is very important for the maintenance of the optimum level or pressure of water supply. This study is based on the offer of basic data for improving the quality of water supply and imploying the sanitory machine or sanitory facilites by analysis of amount increased of water use rapidly. The quantity of hot and cold water use by year is examined as a factor of construction in apartment.

• Journal of environmental and Sanitary engineering
• /
• v.20 no.1 s.55
• /
• pp.76-83
• /
• 2005

The process of reusing the treated water generated during this process and that of recovery of molybdenum from the excessive water were studied. The results were as follows. Molybdenum recollection 1. Reusing processing water generated after dissolving process on FL/20 type, the following were the remaining Mo.'s weights after the 1st, 2nd, 3rd, 4th, 5th, & 6th dissolutions respectively. 1) The result of measuring the quantity of Mo. in processing water(the 1st solving water) generated after the 1st dissolving Mo. process was $369g/\ell$ 2) The result of measuring the quantity of Mo. in processing water(the 2nd solving water) generated after the 1st dissolving Mo. process reusing the 1st solving water was $627.3g/\ell$ 3) The result of measuring the quantity of Mo. in processing water(the 3rd solving water) generated after the dissolving Mo. process reusing the 2nd solving water was $808.11g/\ell$ 4) The result of measuring the quantity of Mo. in processing water(the 4th solving water) generated after the dissolving Mo. process reusing the 3rd solving water was $934.68g/\ell$ 5) The result of measuring the quantity of Mo. in processing water(the 5th solving water) generated after the dissolving Mo. process reusing the 4th solving water was $1023.27g/\ell$ 6) The result of measuring the quantity of Mo. in processing water(the 6th solving water) generated after the dissolving Mo. process reusing the 5th solving water was $1085.29g/\ell$ 2. The followings were the results of recollectings Mo. in processing water respectively generated after dissolving Mo. to produce complete goods df FL/20 type filament. 1) the percentage of recollecting Mo. in the 1st solving water was $93.0\%$ 2) the percentage of recollecting Mo. in the 2nd solving water was $94.5\%$ 3) the percentage of recollecting Mo. in the 3rd solving water was $95.5\%$ 4) the percentage of recollecting Mo. in the 4th solving water was $96.0\%$ 5) the percentage of recollecting Mo. in the 5th solving water was $96.2\%$ 6) the percentage of recollecting Mo. in the 6th solving water was $96.4\%$ 3. The followings were the results of analyzing, with ICP, holding quantities of Mo. in the 6 processing waters to produce FL/20 type filament after passing a 3 staged solid-liquid separator through, dehydrating and drying for more than 3 hours in a dryer to recollect solving Mo. in them 1) the Mo. holding percentage in the 1st solving water was $76.6\%$ 2) the Mo. holding percentage in the 2nd solving water was $76.6\%$ 3) the Mo. holding percentage in the 3rd solving water was $76.6\%$ 4) the Mo. holding percentage in the 4th solving water was $76.6\%$ 5) the Mo. holding percentage in the 5th solving water was $76.6\%$ 6) the Mo. holding percentage in the 6th solving water was $76.6\%$ It was noted that with the number of times the recollecting Mo. percentage become higher, and in spite of much recollecting, without any large effect on the goods the solving water could be reused as the processing water. Because the collected Mo. holding percentages were more than $76\%$, it is considered they are very good one than Chinese Mo. ores with $50\%$ degrees of purity, worthy of recollecting Mo.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.131-137
• /
• 2004

This paper is intended as an investigation of the deposition characteristics and mass transport flux estimation in the Nakdong estuary. In order to understand the effects of the tidal current circulation which influenced to an estuary terrain change, the seawater circulation calculation by the use of 2D numerical model for the three cases of without riverflow, mean and flood riverflow quantity condition practiced and each sectional net-flux of water quantity between sandbars(so called, dung) estimated. It may be that an estuary terrain change due to the large scale construction and reclamation at the Nakdong estuary influence to the long-time deposition characteristics. by the revim for the old research, we know that the development of the local sandbars has been moved toward the east-side from the west-side estuary area after the construction of the Nakdong river dike, at present the strong-acted location is the Bakhap-dung of the front sea of Tadea. The seawater circulation pattern at this large scale area of tidal flat bring on a change due to the water quantity outflowing from the Nakdong river. Base on the calculated results for the section net-flux of water quantity, we see that the accumulating action very strong at the local sea around Jangjado, Bakhapdung and Tadae for the case of flood riverflow quantity condition, but at the local sea around Jinudo for the another cases. Consequently, it is emphasized that in the Nakdong estuary the main sensitive regions which influenced from the discharge of riverflow were the local sea around Jangjado, Bakhapdung, Tadae and Jinudo.

• Journal of Environmental Science International
• /
• v.15 no.3
• /
• pp.261-269
• /
• 2006

In this study, an optimization technique was developed from the application of allocation rule. The results obtained from the water supply analysis and reliability indices analysis of Andong dam and Imha dam which are consist of parallel reservoir system are summarized as the followings; Allocation rule(C) is effective technique at the parallel reservoir system because results of the water supply analysis, storage analysis and reliability indices analysis is calculated reasonable results. Also, reliability indices analysis results are not sufficient occurrence based reliability or quantity based reliability. Thus reliability indices analysis are need as occurrence based reliability, quantity based reliability vulnerability, resilience, average water supply deficits and average storage. And water supply condition is better varying water supply condition than constant water supply condition.

• Journal of Industrial Technology
• /
• v.26 no.B
• /
• pp.43-51
• /
• 2006

Through the result of calculating the deviation between the value calculated from two-dimensional number formula, one-dimensional number interpretation, and curving part water surface type calculation method, we could confirmed that the deviation is reduced more than 50% when we use curving part water surface type calculation method. Also it was confirmed that there occurs the reduction rate of maximum 59% as the result of comparing with one-dimensional number interpretation since the reduction rate of safe room height was 20%, in 500 CMS of flood water quantity when we planted the construction of levee by curving part water surface type calculation method. And therefore, we have confirmed that the curving water surface type calculation method can be used as a simple formula in rivers with water quantity less than 500 CMS that flows in and out in Jess than 90 degree angle.

• KIEAE Journal
• /
• v.15 no.3
• /
• pp.5-14
• /
• 2015

Purpose: Recently, according to climate changes, human health is exposed to danger over the world and they influence all fields of human society. Due to these climate changes, humans can be exposed to more frequent and extreme scorching heat and cold wave than the present. As precautions against these urban higher temperature and dryness, diverse methods are being sought. Among them, as measures to form cold islands, the evaporative cooling effect realistic to social and economic conditions was examined. Method: This study was conducted to analyze effects of temperature reduction and cooling according to injection quantity of minute water particles by using a blast sprayer as one of alternatives of alleviation of urban climate changes in outside space in summer. For this, through temperature difference in accordance with the injection quantity per hour of a day, a time zone representing the value of the highest temperature change was analyzed. Also, by analyzing temperature difference according to the injection quantity per daytime insolation, relation of amounts of insolation and evaporation was investigated. Temperature difference in accordance with distances at the highest temperature with the highest value in temperature changes was analyzed. Result: At the study result, about temperature, as injection quantity increase, temperature reduction was significant statistically at the highest temperature with the most insolation. A factor with the highest influence was judged to be the increase of the injection quantity. According to the injection quantity, it was predicted that $3.1^{\circ}C$ temperature reduction of a daily average in case of 0.16L/min, $3.5^{\circ}C$ temperature reduction of a daily average in case of 0.32L/min, and $4.4^{\circ}C$ temperature reduction of a daily average in case of 0.48L/min.

• Journal of Korean Society of Water and Wastewater
• /
• v.34 no.4
• /
• pp.277-288
• /
• 2020

In this study, we performed algorithms to predict algae of Chlorophyll-a (Chl-a). Water quality and quantity data of the middle Nakdong River area were used. At first, the correlation analysis between Chl-a and water quality and quantity data was studied. We extracted ten factors of high importance for water quality and quantity data about the two weirs. Algorithms predicted how ten factors affected Chl-a occurrence. We performed algorithms about decision tree, random forest, elastic net, gradient boosting with Python. The root mean square error (RMSE) value was used to evaluate excellent algorithms. The gradient boosting showed 10.55 of RMSE value for the Gangjeonggoryeong (GG) site and 11.43 of RMSE value for the Dalsung (DS) site. The gradient boosting algorithm showed excellent results for GG and DS sites. Prediction value for the four algorithms was also evaluated through the Receiver operating characteristic (ROC) curve and Area under curve (AUC). As a result of the evaluation, the AUC value was 0.877 at GG site and the AUC value was 0.951 at DS site. So the algorithm's ability to interpret seemed to be excellent.

• Journal of Advanced Marine Engineering and Technology
• /
• v.8 no.2
• /
• pp.25-38
• /
• 1984

Since the energy shock in 1973, there have been wide studies for the developments of the alternative energy source, the rationalization of the energy utilization and the energy economy because of the recognition of the limitation of energy source all over the world. This study is experimentally examined in and compared with the engine performance of output, torque and fuel consumption rate, and the exhaust emissions with the change of engine rmp in the cases of using water-gashol blends, gashol and gasoline as a fuel in a conventional 4 cycle 4 cylinder gasoline engine. In the case of using water-gashol blends, it is installed by the exhaust manifold pipe into the intake manifold, and water is injected from nozzle fitted up the air horn of the carburetor. The results are obtained as follows; 1. In the case of an addition with water, the engine output and the torque are little difference with the case of gasoline. 2. The fuel consumption rate is decreased as compared with the case of gasoline. Especially, the decrease in quantity is remarkable at the low rpm. 3. The exhaust emissions are remarkably decreased as compared with the case of gasoline. Especially, decreases of CO and HC in quantity are remarkable at the low rpm, and a decrease of No/sub x/ in quantity is remarkable at the high rpm. 4. There is a moderate condition of operation because the producing factors of NO/sub x/ and CO, HC are contrary to each other.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.6
• /
• pp.507-516
• /
• 2021

In this study, the machine learning which has been widely used in prediction algorithms recently was used. the research point was the CD(chudong) point which was a representative point of Daecheong Lake. Chlorophyll-a(Chl-a) concentration was used as a target variable for algae prediction. to predict the Chl-a concentration, a data set of water quality and quantity factors was consisted. we performed algorithms about random forest and gradient boosting with Python. to perform the algorithms, at first the correlation analysis between Chl-a and water quality and quantity data was studied. we extracted ten factors of high importance for water quality and quantity data. as a result of the algorithm performance index, the gradient boosting showed that RMSE was 2.72 mg/m³ and MSE was 7.40 mg/m³ and R² was 0.66. as a result of the residual analysis, the analysis result of gradient boosting was excellent. as a result of the algorithm execution, the gradient boosting algorithm was excellent. the gradient boosting algorithm was also excellent with 2.44 mg/m³ of RMSE in the machine learning hyperparameter adjustment result.