• Title/Summary/Keyword: Water model

Search Result 13,750, Processing Time 1.885 seconds

A TWO-DIMENSIONAL FINITE VOLUME MODEL IN NONORTHOGONAL COORDINATE SYSTEM

  • Kim, Chang-Wan;Lee, Bong-Hee;Cho, Yong-Sik;Yoon, Tae-Hoon
    • Water Engineering Research
    • /
    • 제2권3호
    • /
    • pp.151-160
    • /
    • 2001
  • A two-dimensional flow model is newly developed. Two-dimensional shallow-water equations are discretized by the finite volume method. A nonorthogonal coordinate system is then employed. The developed model is applied to simulations of flows in a 180 degree curved bend flow. Numerical prediction are compared to available laboratory measurement. A good agreement is observed.

  • PDF

DAM BREAK FLOW ANALYSIS WITH APPROXIMATE RIEMANN SOLVER

  • Kim, Dae-Hong
    • Water Engineering Research
    • /
    • 제4권4호
    • /
    • pp.175-185
    • /
    • 2003
  • A numerical model to analyze dam break flows has been developed based on approximate Riemann solver. The governing equations of the model are the nonlinear shallow-water equations. The governing equations are discretized explicitly by using finite volume method and the numerical flux are reconstructed with weighted averaged flux (WAF) method. The developed model is verified. The first verification problem is about idealized dam break flow on wet and dry beds. The second problem is about experimental data of dam break flow. From the results of the verifications, very good agreements have been observed

  • PDF

온도 변화에 따른 수돗물 저장 저수조 내 잔류염소에 관한 수학적 모형 시뮬레이션 (Mathematical Model Simulations Assessing the Effects of Temperature on Residual Chlorine Concentrations in Water Storage Tanks)

  • 노유래;박준홍
    • 한국물환경학회지
    • /
    • 제33권2호
    • /
    • pp.187-196
    • /
    • 2017
  • To ensure hygienic safety of drinking water in a water storage tank, the concentrations of residual chlorine should be above a certain regulation level. In this study, we conducted model simulations to investigate the effects of temperature on residual chlorine in water storage tank conditions typically used in Seoul. For this, values of model parameters (decomposition rate constant, sorption coefficient, and evaporation mass transfer coefficient) were experimentally determined from laboratory experiments. The model simulations under continuous flow conditions showed that the residual chlorine concentrations were satisfied the water quality standard level (0.1 mg/L) at all the temperature conditions ($5^{\circ}C$, $10^{\circ}C$, $15^{\circ}C$, $20^{\circ}C$ and $25^{\circ}C$). Meanwhile, when the tanks had a no flow condition (i.e., no tap-water influent due to a sudden shut-down), the concentrations became lower than the regulatory level after certain periods. The findings from this modeling works simulating Seoul's water storage tanks suggested disappearance rate of residual chlorine could be reduced through the tanks design optimization with maintenance of low water temperature, minimization of air flow and volume, suppression of dispersion and the use of wall materials with low sorption ability.

유황곡선의 거동특성을 이용한 유역관리모형의 평가 (The Evaluation of Watershed Management Model using Behavioral Characteristics of Flow-duration Curve)

  • 김주철;이상진;신현호;황만하
    • 한국물환경학회지
    • /
    • 제25권4호
    • /
    • pp.573-579
    • /
    • 2009
  • The performance of Rainfall-Runoff Forecasting System (RRFS), the watershed management model for the Geum river basin, is evaluated based on the agreement between the simulated and observed hydrographs and the behavioral characteristics of the flow-duration curves. As a result, the simulated hydrographs are well agreed with the observed ones except high flow discharges. It is inferred that most of the errors in the simulated hydrographs are due to the misestimation of agricultural water use in $2^{nd}$ quarter and the discrepancy of the peak discharges in $3^{rd}$ quarter. It is however judged that RRFS would give the reliable runoff hydrographs from the point of view of continuous model application. And simulated flow-duration curves and flow-duration coefficients are also similar to the observed ones except flood flow region. From the above result it is confirmed that the construction of Yongdam dam improves the state of flow-duration curve at the Gongjoo station.

1차원 비정상상태 하천수질모의를 위한 KORIV1-WIN 개발 (Development of One-Dimensional Unsteady Water Quality Model for River)

  • 정세웅;고익환;김남일
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2004년도 학술발표회
    • /
    • pp.563-567
    • /
    • 2004
  • During drought season, the self-purification capacities of the four major rivers in Korea are significantly controlled by environmental maintenance flows supplied from the mid- or upstream large dams. Therefore, it is obviously important to operate the dams considering not only water quantity aspects but also conservation of downstream water quality and aquatic ecosystems. Mathematical water quality models can be efficiently used to serve as a decision support tool for evaluating the effects of operational alternatives of upstream dams on the downstream aquatic environment. In this study, an unsteady one-dimensional water quality model, KORIV1-WIN was developed based on the theoretical and numerical algorithms for hydrodynamics and water quality simulations of CE-QUAL-RIV1. It consists of hydrodynamic(KORIV1H) and water quality(KORIV1Q) modules, and pre- and post-processors for input data preparations and output displays. The model can be used to predict one-dimensional hydraulic and water quality variations in rivers with highly unsteady flows such as dam outflow change, rainfall-runoff, and chemical spill events.

  • PDF

격자 해상도에 따른 EFDC의 새만금호 모의 (The Comparison of Grid Resolutions using EFDC in Saemangeum Reservoir)

  • 신유리;장정렬;최정훈;조영권
    • 한국물환경학회지
    • /
    • 제28권5호
    • /
    • pp.646-656
    • /
    • 2012
  • This study area was Saemangeum Reservoir in Korea and the applied model was Environmental Fluid Dynamics Code(EFDC). It was the same as the scenarios to the boundary and initial conditions except the resolutions of the model grids. The resolutions were about 800 and 2,000 cells. It was considered scenario 1 and 2. The model was performed to simulate the water temperature, salinity, water quality parameters such as dissolved oxygen(DO), chemical oxygen demand(COD), total nitrogen(T-N), and total phosphorus(T-P) at 2008. The simulation results of the two scenarios were reflected in the trend of observed data tolerably. However, water flow, water temperature, and salinity showed high confidence level at the scenario 1. The water quality items did not present high confidence level at the scenario 1 because which concept was considered to biochemical and physical processes. This result shows that grid resolution has an influence on the water transport and the effect is reflected directly shallow and narrow water area. But, the selection of grid resolution should be considered the purpose of model simulation and the process of target items.

교방천 복원을 위한 분산형 유지유량 확보 방안 연구 (I): 수량.수질 타당성 검토를 위한 도시 물순환 모형 적용 (Study on decentralized options of the in-stream flow for restoring the Gyobang cheon: application of the Urban Volume and Quality (UVQ) model to examine feasibilities in water quantity and quality)

  • 신상민;최고은;이상은;박희경
    • 상하수도학회지
    • /
    • 제25권5호
    • /
    • pp.699-706
    • /
    • 2011
  • This study has a purpose of examining technical feasibility of supplying the in-stream flow for the Gyobang cheon by using treated water from small wastewater treatment facilities as a decentralized option. To do this, the water and contaminant flow in study areas of the Gyobang cheon are defined from the context of the integrated urban water cycle, and analyzed by using the Urban Volume and Quality (UVQ) model. First, the UVQ model was built for the study areas of the Gyobang cheon and calibrated with observation data. Second, the decentralized options of the in-stream flow was explored with consideration of availability of water sources. The UVQ simulation then led to selecting the best option which would meet the criteria of water quantity and quality. It was finally concluded that using water sources out of study areas 1 and 2, adjoining the upper part of the Gyobang cheon, in the decentralized manner can be a feasible option for in-stream flow. It also seems that the UVQ model is useful to understand the water cycle in study areas of the Gyobang cheon.

Impact of assimilating the terrestrial water storage on the water and carbon cycles in CLM5-BGC

  • Chi, Heawon;Seo, Hocheol;Kim, Yeonjoo
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2021년도 학술발표회
    • /
    • pp.204-204
    • /
    • 2021
  • Terrestrial water storage (TWS) includes all components of water (e.g., surface water, groundwater, snow and ice) over the land. So accurately predicting and estimating TWS is important in water resource management. Although many land surface models are used to predict the TWS, model output has errors and biases in comparison to the observation data due to the model deficiencies in the model structure, atmospheric forcing datasets, and parameters. In this study, Gravity Recovery And Climate Experiment (GRACE) satelite TWS data is assimilated in the Community Land Model version 5 with a biogeochemistry module (CLM5.0-BGC) over East Asia from 2003 to 2010 by employing the Ensemble Adjustment Kalman Filter (EAKF). Results showed that TWS over East Asia continued to decrease during the study period, and the ability to simulate the surface water storage, which is the component of the CLM derived TWS, was greatly improved. We further investigated the impact of assimilated TWS on the vegetated and carbon related variables, including the leaf area index and primary products of ecosystem. We also evaluated the simulated total ecosystem carbon and calculated its correlation with TWS. This study shows that how the better simulated TWS plays a role in capturing not only water but also carbon fluxes and states.

  • PDF

수리모형과 수치해석을 통한 만곡부 하천의 수리학적 특성 비교 고찰 (A Comparative Study on Hydraulic Characteristics of Curved Channel by Hydraulic Model Experiments and Numerical Analysis)

  • 서동일;최한규
    • 산업기술연구
    • /
    • 제27권A호
    • /
    • pp.85-94
    • /
    • 2007
  • This study, regarding curved channel, was performed to compare and analyze hydraulic characteristics and the speed of water and water level for left bank and right bank through hydraulic model experiments and numerical analysis. Real channels that had characteristics of curved channel were selected as objectives. In order to easily operate one and two dimensional numerical analysis and comparison for total 2.4Km model channel, measuring point was set up as 200m. HEC-RAS model was applied as one dimensional numerical analysis program and SMS model was used as two dimensional numerical analysis program. In respect of speed of water, the average speed of water for right bank recorded 8.33m/s in a model experiment and 3.08m/s, 8.57m/s were average speed of water for right bank in one dimensional and two dimensional numerical analysis. The average speed of water of two dimensional numerical analysis was quite similar to that of model experiments. Also, as for water level, maximum observational errors between one and two dimensional numerical analysis for right and left bank of model experiments were 0.66m, 0.84m and 0.28m, 0.48m for each. It was found that two dimensional numerical analysis had a similar result to hydraulic model experiments. Accordingly, from the result of this study, two dimensional numerical analysis should be used rather than one dimensional numerical analysis, when numerical analysis for curved channel is conducted.

  • PDF