• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.279-279
• /
• 2012

In order to estimate the average migration lengths of $H_3O^+$ ions in amorphous ice, we conducted experiments of reactive ion scattering (RIS), low energy sputtering (LES), and reflection absorption IR spectroscopy (RAIRS) with an ultra-high vacuum (UHV) chamber. Dopped water-ice films were grown on the clean surface of Ru single crystal and analyzed with RIS, LES and RAIRS methods. The population changes of probe molecules, which were buried at a controlled distance from the surface, were monitored by those methods so that we can mesure the migration efficiencies. From the measured efficiencies, we evaluated the average migration lengths. This result is expected to give the information about the dynamics of proton in water-ice film.

• Carbon letters
• /
• v.15 no.1
• /
• pp.50-56
• /
• 2014

We prepared ethylene vinyl alcohol (EVOH)/graphene oxide (GO) membranes by solution casting method. X-ray diffraction analysis showed that GOs were fully exfoliated in the EVOH/GO membrane. The glass transition temperatures of EVOH were increased by adding GOs into EVOH. The melting temperatures of EVOH/GO composites were decreased by adding GOs into EVOH, indicating that GOs may inhibit the crystallization of EVOH during non-isothermal crystallization. However, the equilibrium melting temperatures of EVOH were not changed by adding GOs into EVOH. The oxygen permeability of the EVOH/GO (0.3 wt%) film was reduced to 63% of that of pure EVOH film, with 84% light transmittance at 550 nm. The EVOH/GO membranes exhibited 100 times better (water vapor)/(oxygen) selectivity performance than pure EVOH membrane.

• Journal of Integrative Natural Science
• /
• v.3 no.4
• /
• pp.219-225
• /
• 2010

On the surface of mesoporous silica thin films (MSTF) which were fabricated by sol-gel approach there are existences of water and three different silanol types including chained, germinal and isolated silanol. Their amounts changes as a function of aging time of used sol solution, as confirmed by FT-IR. The adsorbed water generates ionic carriers such as H+ and OH- and passivates the Si dangling bonds at the interface of silicon wafer-MSTF. The ionic carriers can not only transport across the thickness of thin film to enhance the leakage current but also diffuse toward the silicon wafer-MSTF interface to depassivate Si dangling bonds. On the other hand, chained silanols or germinal silanols promote the moisture adsorption of MSTF and tend to form strongly hydrogen bonded systems with adsorbed water molecules resulting in very high dielectric constant. Isolated silanol, on the contrary, affects less on electrical properties of thin film.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.107-111
• /
• 2019

We report the fabrication of a CdS/CuInGaSe (CdS/CIGS) structure with carbon nanotubes and its application as a photocathode for photoelectrochemical water splitting. CIGS thin films were fabricated using co-evaporation by RF magnetron sputtering, while CdS was fabricated by chemical bath deposition. Spray coated multi-wall carbon nanotube (CNT) film on CdS/CIGS thin film was investigated as a photocathode. The CNT-coated CdS/CIGS showed superior photocurrent density and exhibited improved photostability.

• Membrane and Water Treatment
• /
• v.10 no.5
• /
• pp.381-385
• /
• 2019

Surface modification is very efficient and scalable approach to achieve improved membrane performance. We treated Reverse Osmosis Thin Film Composite (TFC RO) membrane with various concentrations of Polyethylene Glycol (PEG), a hydrophilic polymer after activation with sodium hypochlorite. This treatment resulted in an increment of the water flux by 43% and the salt rejection by 2.36% for the 3000 mg/l PEG-treated membrane. Further, these PEG-treated membranes were exposed to a mixture of 3000 mg/l PEG and 1000 mg/l sodium hypochlorite for 1 hour. Further modification of this membrane by PEG and sodium hypochlorite mixture increased the water permeance up to 133% when compared with the virgin TFC RO membrane. We characterized the treated membranes to understand the changes in wettability by contact angle analysis, changes in surface morphology and roughness by scanning electron microscope (SEM) and atomic force microscope (AFM) analysis.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.6
• /
• pp.924-931
• /
• 2022

Undenatured castor oil and trimethylolpropane (TMP) were used to obtain bio-based water-based polyurethane. Isophorone diisocyanate (IPDI) was incorporated into the formulation to obtain a transparent film, and ethylenediamine (EDA) was used for chain extension. In order to measure the change in physical properties according to the contents of castor oil and TMP, each tensile strength, elongation, and abrasion resistance test was conducted. As the contents of castor oil and TMP increased, the tensile strength increased, the elongation decreased, and the surface hardened strongly as the respective contents increased.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.3
• /
• pp.267-273
• /
• 2013

In order to provide effective operating conditions for the fan in a wet cooling tower with film fill, a new program to search for the minimum fan power was developed using a model of the optimal total annual cost of the tower based on Merkel's model. In addition, a type of design map for a cooling tower was also developed. The inlet water temperature and heat load were considered as key parameters. The present program was first validated using several typical examples. The results showed that for a given heat load, a three-dimensional graph of the fan power (z-axis), mass flux of air (x-axis, minimum fan power), and inlet water temperature (y-axis, maximum of minimum fan power) showed a saddle configuration. The minimum fan power increased as the heat load increased. The conventionally known fact that the most effective cooling tower operation coincides with a high inlet water temperature and low air flow rate can be replaced by the statement that there exists an optimum mass flux of air corresponding to a minimum fan power for a given inlet water temperature, regardless of the heat load.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.938-941
• /
• 2003

It is well known that the state of existence of molecules on the surface of water changes during compression of the molecules. Electric methods, such as measurement of the surface potential or displacement current are also useful for investigating dynamic changes of molecular state on the water surface during compression and Transformation of molecular film occurs only usually in air-water interface, 2 dimensions domain's growth and crash are achieved. Organic thin film that consist of growth of domain can understand correct special quality of accumulation film supplying information about fine structure and properties of matter of device observing information and so on that is surface forward player and optic enemy using AFM one of SPM application by nano electronics. In this paper Langmuir (L) that is one of basis technology to manufacture of organic matter device using biology material PBDG that is kind of polypeptide that have biology adaptedness. The Experiment method used ${\pi}-A$ isotherm and BAM(Brewster Angle Microscopy), using the BAM, we can to the molecular orientation of monolayer on the water surface and directly see the morphology of the films on water subphase as well as that of the films.

• Journal of Adhesion and Interface
• /
• v.9 no.2
• /
• pp.24-31
• /
• 2008

In this work, calcium hydroxide and magnesium carbonate as metal ionic crosslinking agents were used to introduce ionic crosslinking points to the ethylene vinylacetate (EVA) emulsions for the enhancement of water resistance and mechanical properties of emulsion films. The properties of EVA emulsion film were investigated in crosslinking density, thermal features, surface energy, and mechanical properties, such as tensile strength, elongation at break and tear strength. With the increasing content of metal ionic crosslinking agent, the crosslinking density of the EVA emulsion film increases, resulting into the improvement of water resistance. The surface energy and mechanical properties of the EVA emulsion film, however, showed somewhat different behaviors. The highest surface energy, tensile strength, and tear strength were observed when 0.4% for calcium hydroxide and 0.5% for magnesium carbonate was added respectively, because the EVA emulsion containing carboxylic acid forms strong carboxylate-metal bond of ionically-crosslinked system. Therefore, it can be concluded that metal ionic crosslinking agents, such as magnesium carbonate and calcium hydroxide are considered to improve water resistance and mechanical properties of the EVA emulsion.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.9
• /
• pp.1251-1255
• /
• 2006

To improve the water resistance and physical properties of soy protein isolate (SPI)-coated paper, effects of concentrations of soy protein isolate and plasticizer were examined. Physical properties such as elongation strength (ES), elongation rate (E), water vapor permeability (WVP), and water solubility (WS) were evaluated. The film made from 5% soy protein isolate (SPI) and 40% glycerol (plasticizer) suggested a good application for a film preparation. SPI coated paper showed the highest ES (21.62 MPa) and the lowest WVP $(2.06ng{\cdot}m/m^2{\cdot}s{\cdot}Pa)$ and WS (1.17%). This study suggested that soy protein isolate (SPI) can be used as a coating material for the coated paper to improve the water resistance.