DOI QR코드

DOI QR Code

Effect of Water Resistance and Physical Properties of Soy Protein Isolate coated Liner Board

대두단백 코팅 종이의 수분저항성 및 물리적 성질

  • Ha, Sang-Hyung (Institute of Life Science and Resources, Dept. of Food Science and Biotechnology, Kyung Hee University) ;
  • Park, Cheon-Seok (Institute of Life Science and Resources, Dept. of Food Science and Biotechnology, Kyung Hee University) ;
  • Kim, Byung-Yong (Institute of Life Science and Resources, Dept. of Food Science and Biotechnology, Kyung Hee University)
  • 하상형 (경희대학교 생명자원연구소, 식품공학과) ;
  • 박천석 (경희대학교 생명자원연구소, 식품공학과) ;
  • 김병용 (경희대학교 생명자원연구소, 식품공학과)
  • Published : 2006.09.01

Abstract

To improve the water resistance and physical properties of soy protein isolate (SPI)-coated paper, effects of concentrations of soy protein isolate and plasticizer were examined. Physical properties such as elongation strength (ES), elongation rate (E), water vapor permeability (WVP), and water solubility (WS) were evaluated. The film made from 5% soy protein isolate (SPI) and 40% glycerol (plasticizer) suggested a good application for a film preparation. SPI coated paper showed the highest ES (21.62 MPa) and the lowest WVP $(2.06ng{\cdot}m/m^2{\cdot}s{\cdot}Pa)$ and WS (1.17%). This study suggested that soy protein isolate (SPI) can be used as a coating material for the coated paper to improve the water resistance.

대두단백 필름을 코팅한 라이너지의 효과를 알아보기 위하여 대두단백 $2\sim8%$의 농도 범위에서 필름을 제조하였다. 필름 제조시 친수성 소재인 대두단백의 불용화를 위하여 모든 필름은 formaldehyde로 포화된 데시케이터에서 2시간 동안 흡착하여 사용하였다. 필름의 연신강도, 연신율, 투습도 및 수분용해도를 측정한 뒤 최적 농도를 5%로 판단하였다. 필름의 제조적성을 위해 첨가된 가소제 glycerol은 대두단백 대비 40% 농도에서 필름제조에 가장 적합하였다. 앞의 조건을 이용하여 제조된 용액을 라이너지에 코팅하여 그 물성과 수분저항성을 측정하였다. Formaldehyde 처리된 대두단백 코팅 라이너지는 미처리 라이너지에 비하여 연신강도는 15 에서 21 MPa로 증가하였고, 수분용해도와 투습계수는 1.17%와 $2.06ng{\cdot}m/m^2{\cdot}s{\cdot}Pa$로 감소하여 물리적 성질과 수분저항성 모두 증진된 것을 알 수 있었다.

Keywords

References

  1. 산업자원부. 2000. 포장기술선진화 개발전략. (사)한국포장개발연구원
  2. 조병묵. 1994. 골판지 원지의 기초 물성과 품질강도의 국제 비교. 골판지 포장․물류 8: 92-101
  3. Miltz J, Segal Y, Atad S. 1989. The effect of polymeric impregnation on the properties of paper and corrugated board. Tappi 72: 63-66
  4. Kester JJ, Fennema OR. 1986. Edible films and coatings: a review. Food Technol 40: 47-59
  5. Krochta JM, Mulder-Johnston CD. 1997. Edible and biodegradable polymer films: challenges and opportunities. Food Technol 51: 61-74
  6. Krochta JM. 1992. Control of mass transfer in foods with edible coatings and films. In Advances in Food Engineering. Singh RP, Wirakartakasuman MA, eds. CRC Press, Boca Raton, FL. p 517-538
  7. McHugh TH, Avena-Bustillos R, Krochta JM. 1993. Hydrophilic edible films: modified procedure for water vapor permeability and explanation of thickness effects. J Food Sci 58: 899-903 https://doi.org/10.1111/j.1365-2621.1993.tb09387.x
  8. Kim DH. 1995. Food protein. In Food chemistry. Tamgudang, Seoul, Korea. p 655-717
  9. Ghorpade VM, Li H, Gennadios A. 1995. Chemically modified soy protein films. Trans ASAE 38: 1805-1811 https://doi.org/10.13031/2013.28007
  10. Rhim JW, Gennadios A, Weller CL, Cezeirat C, Hanna MA. 1998. Soy protein isolate-dialdehyde starch films. Industr Crops Products 8: 195-203 https://doi.org/10.1016/S0926-6690(98)00003-X
  11. Gennadios A, Ghorpade VM, Weller CL, Hanna MA. 1996. Heat curing of soy protein films. Trans ASAE 39: 575-579 https://doi.org/10.13031/2013.27537
  12. ASTM. 1995. Standard test methods for water vapor transmission of materials (E96-95). In Annual Book of ASTM Standards. American Society for Testing and Materials, Philadelphia, USA. Vol 4, p 697-704
  13. Gennadios A, Weller CL, Gooding CH. 1994. Measurement errors in water permeability of highly permeable, hydrophilic edible films. J Food Eng 21: 395-409 https://doi.org/10.1016/0260-8774(94)90062-0
  14. Rhim JW, Park JW, Jung ST, Park HJ. 1997. Formation and properties of corn zein coated $\kappa$-carrageenan films. Korean J Food Sci Technol 29: 1184-1190
  15. Kim EJ, Kim BY, Rhim JW. 2005. Enhancement of the Water-resistance and physical properties of sodium alginate film. Food Sci Biotechnol 14: 108-111
  16. Rhim JW. 1999. Measurement of water vapor permiability of bio-polymer films. J Korean Soc Packaging Sci Tech 5: 37-46
  17. Han CH, Um IC, Kweon HY, Park YH. 2000. Effect of glycerol addition on the structure and properties of soluble wool keratose films. J Korean Fiber Soc 37: 442-447