• Journal of the Korean earth science society
• /
• v.39 no.3
• /
• pp.228-240
• /
• 2018

Solar energy is calculated using meteorological (14 station), ceilometer (2 station) and microwave radiometer (MWR, 7 station)) data observed from the Weather Information Service Engine (WISE) on the Seoul metropolitan area. The cloud optical thickness and the cloud fraction are calculated using the back-scattering coefficient (BSC) of the ceilometer and liquid water path of the MWR. The solar energy on the surface is calculated using solar radiation model with cloud fraction from the ceilometer and the MWR. The estimated solar energy is underestimated compared to observations both at Jungnang and Gwanghwamun stations. In linear regression analysis, the slope is less than 0.8 and the bias is negative which is less than $-20W/m^2$. The estimated solar energy using MWR is more improved (i.e., deterministic coefficient (average $R^2=0.8$) and Root Mean Square Error (average $RMSE=110W/m^2$)) than when using ceilometer. The monthly cloud fraction and solar energy calculated by ceilometer is greater than 0.09 and lower than $50W/m^2$ compared to MWR. While there is a difference depending on the locations, RMSE of estimated solar radiation is large over $50W/m^2$ in July and September compared to other months. As a result, the estimation of a daily accumulated solar radiation shows the highest correlation at Gwanghwamun ($R^2=0.80$, RMSE=2.87 MJ/day) station and the lowest correlation at Gooro ($R^2=0.63$, RMSE=4.77 MJ/day) station.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.1
• /
• pp.29-39
• /
• 2012

Currently, environment-friendly and sustainable fisheries are one of the major issues among fisheries authorities. A variety of alternative management policies and projects are going on to enhance fisheries management systems and fishery resources such as a TAC management program and a VDS (Vessel Day Scheme) management scheme for distant water fishing nations in Western and Central Pacific Fisheries Commission (WCPFC) convention area. These kinds of efforts among fisheries management authorities are aimed at limiting fishing capacity or fishing power. In terms of fisheries management, Fishing capacity and fishing power have increased the importance of the impact on a fishery and level of the resources. Increased fishing capacity and fishing power have caused not only depletion of fisheries resource, but also additional fishing cost. therefore, there is a clear need for authorities to manage fishing capacity and fishing power. It is also help ensure the conservation and sustainability of the fishery resources. Because of lack of data, absolute fishing power is difficulty to measure. The notion of relative fishing power is frequently used. In this study, relative fishing power was assessed using Mastuda (1991) method for fishing power index. The raw data for assessment was based on fishermen's logbook data from sampled fishing vessels in coastal snow crab gillnet fishery. Data Envelopment Analysis (DEA) method was used to assess fishing capacity. DEA is a linear programming methodology to measure the efficiency of a set of entities called Decision-Making Units (DMUs). It was recommended by FAO for assessing capacity in fisheries.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.477-484
• /
• 2009

It is important for the strategy of service to provide the weather information in the environment that the smart clothing has been changed focusing on the consumer center. Recently, the various applications of smart clothing concept have been presented by researchers and developers. Among them, the smart clothing based on the sensors is most likely to gain the highest demand rate in the market. In this paper, we proposed the life weather index monitoring system using the wearable based smart cap. By wearing the proposed smart cap, the weather status is gathered and its signals are transmitted to the connected UMPC. It can be easily monitored in real time. To provide the life weather index according to the sensors, the weather index was analyzed in terms of 6 factors, such as, the heat index, the food poisoning index, the discomfort index, the ultraviolet index, the water pipe freeze possibility index, and the windchill temperature index. Ultimately, this paper suggests empirical application to verify the adequacy and the validity with the life weather index monitoring system. Accordingly, the satisfaction and the quality of services will be improved the smart clothing.

• Spatial Information Research
• /
• v.22 no.2
• /
• pp.63-71
• /
• 2014

Ocean leisure sports have recently emerged as one of so-called blue ocean industries. They are sensitive to diverse environmental conditions such as current, temperature, and salinity, which can increase needs of forecasting data as well as in-situ observations for the ocean. In this context, a Web-based geovisualization system for coastal information produced by model forecasts was implemented for use in supporting various ocean activities. First, FVCOM(Finite Volume Coastal Ocean Model) was selected as a forecasting model, and its data was preprocessed by a spatial interpolation and sampling library. The interpolated raster data for water surface elevation, temperature, and salinity were stored in image files, and the vector data for currents including speed and direction were imported into a distributed DBMS(Database Management System). Web services in REST(Representational State Transfer) API(Application Programming Interface) were composed using Spring Framework and integrated with desktop and mobile applications developed on the basis of hybrid structure, which can realize a cross-platform environment for geovisualization.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.9
• /
• pp.2894-2900
• /
• 1996

The stream generator tubes represent an integral part of a major barrier against the fission product release to the environment. So, the rupture of these tubes could permit flow of reactor coolant into the secondary system and injure the safety of reactor coolant system. Therefore, if the crack was detected during In-Service Inspection of tubes the cracked tube should be evaluated by the pulgging criteria and plugged or not. In this study, the fracture mechanics evaluation is carried out on the thru-wall axial crack due to Primary Water Stress Corrosion Cracking in the roll transition aone of steam generator tube to help the assurence the integrity of tubes and estabilish the plugging criteria. Due to the Inconel which is used as tube material is more ductile than others, the plastic instability repture theory was used to calculate the critical and allowable crack length. Based on Leak Before Break concept the leak rate for the critical crack length and the allowable leak rate are compared and the safety of tubes was given.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.6
• /
• pp.996-1008
• /
• 2009

In this study, domestic wheat flour was used to develop a native sourdough suitable for the Korean environment, in an attempt to replace the sourdough starter that are currently available in local markets and used to prepare sourdough breads. Nine kinds of domestic wheat flour (available at local market) were examined and to characterized according to their general ingredients, gluten contents, colorimetry data and mixograph measurement. In addition, the flour were used to make sourdough starters that were assessed for pH, TTA, and fermentation rate from which an optimal sourdough starter could be chosen. This study also compared the product characteristics breads prepared from the with one another by adding extracted sourdough starters. In order to analyze the quality characteristics of the breads, a comparative analysis was conducted through on data for dough fermentation rate, specific volume, texture analyses, colorimetry, water activity and sensory tests. According to the results, the sourdough starters KWF 3, KWF 4 and KWF 5 scored well in evaluations for gluten content, wheat flour characteristics and pH, and were deemed the most optimal starters. To characterize the sourdough breads prepared from KWF 3, KWF 4, and KWF 5, their quality characteristics were analyzed and then compared to those sourdough bread (control group) prepared using a sourdough starter made from imported wheat flour. According to the comparative analysis of the quality characteristics, KWF 4 had the largest volume and specific volume, but had the lowest textural hardness, indicating the softest texture of overall. According to sensory tests, the bread prepared from KWF 4 was significantly more preferred than the other specimens.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.1
• /
• pp.185-201
• /
• 2014

The Yong-neup of Mt. Daeam, which was designated as Korea's National Monument No.246 in 1973, is a high moor, and it has been managed with the designation as an ecosystem conservation area, Ramsar wetlands, and wetland conservation area. With the closing of the officially announced 5-year period for 'No-Trespassing' on the ecosystem conservation area starting August, 2010, it becomes necessary to arrange a systematic management and conservation scheme in consideration of the access & use of the visitors and Yong-neup's potential change into land consequent on making it open to the public. This study thinks that in order to preserve the Yong-neup, it's necessary to prepare the conservation plan for the program operation for exterminating exotic species, development of replacement wetlands and nurseries, access limit through zone categorization, establishment of environment-monitoring system, institutional management support, and establishment of managing facilities, etc., and to make scientific approaches, such as survey on wetland ecosystem, establishment of inventories, wetland monitoring, and drawing up of wetland ecology maps, etc. In addition, it is required that there should be adequate considerations of restoration of slope faces, drains, artificial embankment, water-collecting wells, roads for military operations, and wild-boar-stricken areas, etc., and should be continuous and systematic management of Yong-neup through the wise use of residents' participation-style maintenance, organization of a consultative body, introduction of CEPA programs, and introduction of visiting facilities and alternative transportation system, etc.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.2
• /
• pp.177-187
• /
• 2005

The Land Use Suitability Assessment System was recently introduced by the Act on Planning and Utilization of the National Territory to use, manage, and develop the national territory, which integrated the National Land Use and Management Act and the Urban Planning Act. It provides a guideline for land use according to locational characteristics, usability, and developmental conditions of land in the vicinity. The database is constructed with LMIS cadastral data, posted land price data, and the data of related agencies such as the Korea Forest Service, the Ministry of Environment, and the Korea Water Resources Corporation etc. In this paper we describe accurate database construction method fur land use suitability assessment system as classifying and verifying errors deriving from database construction focused on Jinju city. Those data errors have the problems such as accuracy difference among the related agencies data, gap of data acquisition time, and non-consideration of latest updated data etc.

• Journal of Korea Port Economic Association
• /
• v.30 no.1
• /
• pp.143-157
• /
• 2014

Most metropolitan shippers (MS) have used trans pacific route (TPR) or Asia-Europe route (AEP) through Busan port (BP). If Incheon new port (INP) sets up the deep water-depths under -16m, however, there might be a change in MS's port choice behavior (PCB). In this respect, the aim of this paper is to estimate an INP's allotment rate for metropolitan cargo using Logit Model (LM) considering changing global shipping and port environment. This paper reviews previous studies related to shippers' PCB then sets up the utility function (UF) including the dummied dependent variable which is comprised of BP and INP, and some independent variables such as the frequency of liner shipping route (TPR), inland transportation fare, and the rate of container terminal service. As a result of LM analysis, BP has 0.6618 and INP has 0,3382.

• Journal of dental hygiene science
• /
• v.22 no.4
• /
• pp.241-248
• /
• 2022

Background: Plastic waste generates pollutants in the process of incineration or landfilling, and accumulates in water or marine organisms, causing adverse effects on the environment and the human body. Recently, various eco-friendly oral hygiene products (Eco-OHPs) such as bamboo toothbrushes and biodegradable plastic toothbrushes have been developed. Therefore, this study aimed to investigate the current level of awareness and purchasing status of eco-OHPs among adults who are interested in eco-friendly products. Methods: This study included adults aged >19 years who regularly visited eco-friendly shops and online sites; the online survey links were distributed during their visits to eco-friendly Internet cafés and companies. Of the 22 questions, seven assessed the participants' general characteristics, three assessed the general oral hygiene care products used, six assessed the level of awareness of Eco-OHPs, and six assessed the purchasing status of Eco-OHPs. Frequency analysis, chi-square test, and regression analysis were performed using SPSS software. Results: Among the respondents, 108 (51.4%) were aware of Eco-OHPs, and 79 (37.6%) had experience purchasing Eco-OHPs. The most common reason for not purchasing was the lack of information about related brands or products (74, 56.5%). The most common platform used in obtaining information was the Internet (general: 31.5%, eco-friendly: 46.3%), such as Social Network Service, Internet cafes, and blogs. The experience in purchasing Eco-OHPs was affected by whether the respondents recognized the possibility of contributing to environmental preservation, availability of vendors, product safety, and the number of eco-friendly products purchased. Conclusion: In order to expand the use of Eco-OHPs, various efforts such as promotion of eco-friendly characteristics, determination of related vendors, reliable analysis of product safety, and expansion of product experience opportunities are required.