• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 전기설비
• /
• pp.55-57
• /
• 2005

Along with the development of the industrial society, as the transportation of water which is the indirect capital of society and petroleum, gas, etc used as energy sources is rapidly increased. the underground material is being expanded. Like this, the pipes laid under the ground not only bring the corrosion to the land circumstances to reduce the life of the pipes, but also raise the social problem of leakage accidents and the economic loss by Pin Hole. By reason of this, for the purpose of protecting the corrosion of the underground material, we are constructing and operating the electrolytic protection facilities. In case of a region of which specific resistance is high, however, we are not keeping proper protection potential(that is -850mV) to get protection effects. In this study, for the water pipes that under-voltage phenomena occur in the protection potential, we made a spot survey on the under-voltage section and normal-voltage section, compared, analyzed each of the contents and examined the under-voltage causes of the protection potential.

• Earthquakes and Structures
• /
• 제16권6호
• /
• pp.727-741
• /
• 2019

A reinforced concrete water tank is a typical functional liquid storage structure and cracks are the greatest threat to the liquid storage structure. Tanks are readily cracked due to seismic activity, thereby leading to the leakage of the stored liquid and a loss of function. In order to study the effect of cracks on liquid storage tanks, self-healing and leakage tests for bending cracks and through cracks in the walls of a reinforced concrete water tank were conducted. Material performance tests were also performed. The self-healing performance of bending cracks in a lentic environment and through cracks in a lotic environment were tested, thereby the self-healing width of bending micro-cracks in the lentic environment in the short term were determined. The through cracks had the capacity for self-healing in the lotic environment was found. The leakage characteristics of the bending cracks and through cracks were tested with the actual water head on the crack. The effects on liquid leakage of the width of bending cracks, the depth of the compression zone, and the acting head were determined. The relationships between the leakage rate and time with the height of the water head were analyzed. Based on the tests, the relationships between the crack characteristics and self-healing as well as the leakage were obtained. Thereby the references for water tank structure design and grading earthquake damage were provided.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1993년도 한-중 국제학술회의 발표논문
• /
• pp.99-105
• /
• 1993

This Article analyses the present situation of Shanghai Harbour and the Harbour's important role in the development of chinese economy. The article forecasts that the yearly tonnage turnover of the port will reach about 200 million tons in the year of 2000, possibly reach to 270--300 million tons by the end of 2020. it also forecasts that the container handling capacity of the port will be 2 million TEUS in 2000 and 6 million TEUS in 2020 respectively. In order to keep pace with the present situation of opening up and developing Pudong new area, this article suggests that the strategic target of the management and development of Shanghai Harbour should be : grasp the opportunity of opening up and developing Pudong, take the building of the deep-waterway port as the main task, which can accept the third or fourth generation international container ships, bring into full play the traditional advantages the Harbour has, unfold the businesses in other fields, participate in the marketing competition, speed up the development of the Harbour itself, make efferts to build Shanghai Harbour into a port-industry-trade-transportation integral modernized international deep-water key port.

• Tribology and Lubricants
• /
• 제19권2호
• /
• pp.94-101
• /
• 2003

Used motor oil contains pollutants, including organic chemicals and meta]s. When disposed of improperly - in the trash, on the ground or in a sewer system - the pollutants may reach rivers, lakes or the ground water. Thus, all the waste oil products such as waste motor oil, waste oil container, and waste oil filter should be collected and transported for recycling or disposal by waste oil regulations. Because waste oil container is a valuable resource, waste oil containers can be reused, cleaned, buried, and burned for recycling processes. This paper presents the integrated management system that may increase the efficiency and productivity for collecting and reprocessing waste oil containers such as steel can and plastic container. The integrated management system consists of collection and transportation process management system and confirmation and certification process management system for waste oil containers.

• 융복합기술연구소 논문집
• /
• 제6권2호
• /
• pp.25-28
• /
• 2016

Recently, due to the climate change by global warming, the amount of snow has increased. The situations were demanded to use many snow removal materials. The snow removal materials that used in Korea were solid chloride deicing material. That is calcium chloride($CaCl_2$) and sodium chloride(NaCl). Solid chloride baesd snow removal materials have various property, for example good freezing point depression, deliquescence and economical solvents. However, there are problems such as water pollution, high corrosiveness and ecocide. For such reason, development of eco-friendly deicer was required obligatorily. This study investigated development situation of eco-friendly deicer materials.

• 융복합기술연구소 논문집
• /
• 제2권2호
• /
• pp.59-65
• /
• 2012

This paper presents the study on applications of a surplus heat source. The heat is generated while hardwood charcoals are produced. We measure the temperature of the generated heat and analyze whether it can heat water or not. The analytic results show that the generated heat is useful as one of heat sources. In agricultural methods using a vinyl house, heating expenses will be saved by 10~20% when the surplus heat source is used.

• Journal of Advanced Research in Ocean Engineering
• /
• 제4권2호
• /
• pp.53-65
• /
• 2018

The load condition significantly influences ship maneuverability in calm water. In this research, the effect of the load condition on turning performance of a very large crude oil carrier (VLCC) sailing in adverse weather conditions is investigated by an MMG-based maneuvering simulation method. The relative drift direction of the ship in turning to the wave direction is $20^{\circ}-30^{\circ}$ in ballast load condition (NB) and full load condition (DF) with a rudder angle $35^{\circ}$ and almost constant for any wind (wave) directions. The drifting displacement in turning under NB becomes larger than that under DF at the same environmental condition. Advance $A_d$ and tactical diameter $D_t$ become significantly small with an increasing Beaufort scale in head wind and waves when approaching, although $A_d$ and $D_t$ are almost constant in following wind and waves. In beam wind and waves, the tendency depends on the plus and minus of the rudder angle.

• 대한안전경영과학회지
• /
• 제18권3호
• /
• pp.71-80
• /
• 2016

This study is on safety improvement measures through analysis of accident cases during plant storage tank construction. Storage tank is a general term for artificial ground facility constructed to store oil, water, gas, and other chemicals. Some companies have clustered storage tanks (tank farm). The construction methods vary according to the component and types of fluids. Because most of the construction procedures include lifting heavy weight materials using heavy construction equipment and are carried out at high places, storage tank construction contains more risk factors than normal aerial construction. Recently, major accidents such as storage tank collapse have occurred often, and cost many lives due to the characteristics of the structure. In this study we would like to analyze the cause of these accidents and propose measures to improve safety.

• 대한안전경영과학회지
• /
• 제21권4호
• /
• pp.81-89
• /
• 2019

Need to make efforts to reduce greenhouse gas emissions in order to slow global warming is globally recognized and also appealing to the United Nations. The main cause of greenhouse gases is carbon dioxide, and the nation has 23.9 percent of its total emissions in the transportation sector. It was also reported that 61.56 percent of living waste is being recycled, suggesting that environmentally friendly logistics activities should proceed with efforts on goods and services at each stage of distribution. In this study, we conducted a survey of green logistics activities that were environmentally friendly by businesses, divided into management, water/delivery and packaging waste, and identified the status and level of each business sector. As a result, data was collected from 36 manufacturing companies, 28 distribution businesses, and 40 logistics businesses, all of which were 104 companies, and based on the analysis results, a measure for environmentally friendly logistics activities was proposed.

• 국제초고층학회논문집
• /
• 제4권2호
• /
• pp.103-107
• /
• 2015

China's rapidly growing cities offer a unique opportunity to create highly sustainable communities. Architects and their clients, typically real estate developers, are highly focused on strategies that are effective at reducing energy and water usage at the scale of the individual building or within a master plan of multiple related buildings. However, a closer look at energy consumption reveals that transportation uses more energy worldwide than residential and commercial buildings combined. In light of this, it is appropriate that China is making massive investments in transportation infrastructure like heavy rail rapid transit and grade separated expressways, but the end result of these investments to date has been to enable people to live further from where they work and shop rather than closer - while simultaneously not creating walkable communities. Using positive and negative examples from Asia and the rest of the world, this article will investigate the specific urban design policies such as height limits, setbacks, land use restrictions, parking ratios, and parcel size which might change to enable the creation of truly sustainable communities for China's 21st century.