• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.479-495
• /
• 2018

This study was carried out to research the multimedia fate modeling, concentration distribution and impact assessment of polycyclic aromatic hydrocarbons (PAHs) emitted from automobiles, which are known as carcinogenic and mutation chemicals. The amount of emissions of PAHs was determined based on the census data of automobiles at a target S-city and emission factors of PAHs, where multimedia fugacity modeling was conducted by the restriction of PAHs transfer between air-soil at the impervious area. PAHs' Concentrations and their distributions at several environmental media were predicted by multimedia fugacity model (level III). The residual amounts and the distributions of PAHs through mass transfer of PAHs between environment media were used to assess the health risk of PAHs at unsteady state (level IV), where the sensitivity analyses of the model parameter of each variable were conducted based on Monte Carlo simulation. The experimental result at S-city showed that Fluoranthene among PAHs substances are the highest residual concentrations (60%, 53%, 32% and 34%) at all mediums (atmospheric, water, soil, sediment), respectively, where most of the PAHs were highly accumulated in the sediment media (more than 80%). A result of PAHs concentration changes in S-city over the past 34 years identified that PAHs emissions from all environmental media increased from 1983 to 2005 and decreased until 2016, where the emission of heavy-duty vehicle including truck revealed the largest contribution to the automotive emissions of PAHs at all environment media. The PAHs concentrations in soil and water for the last 34 years showed the less value than the legal standards of PAHs, but the PAHs in air exceeded the air quality standards from 1996 to 2016. The result of this study is expected to contribute the effective management and monitoring of toxic chemicals of PAHs at various environment media of Metropolitan city.

• Journal of the Korean association of regional geographers
• /
• v.3 no.1
• /
• pp.63-80
• /
• 1997

This study attempts to establish the criteria of site selection for establishing solid waste disposal facility, to determine optimal solid waste disposal sites with the criteria, and to examine the suitability of the selected sites. The Multi-Criteria Evaluation(MCE) module in Idrisi is used to determine optimal sites for solid waste disposal. The MCE combines the information from several criteria in interval and/or ratio scale to form a single index of evaluation without leveling down the data scale into ordinal scale. The summary of this study is as follows: First, the considerable criteria are selected through reviewing the literature and the availability of data: namely, percent of slope, fault lines, bedrock characteristics, major residential areas, reservoirs of water supply, rivers, inundated area, roads, and tourist resorts. Second, the criteria maps of nine factors have been developed. Each factor map is standardized and multiplies by its weight, and then the results are summed. After all of the factors have been incorporated, the resulting suitability map is multiplied by each of the constraint in turn to "zero out" unsuitable area. The unsuitable areas are discovered in urban district and its adjacencies, and mountain region as well as river, roads, resort area and their adjacency districts. Third, the potential sites for establishing waste disposal facilities are twenty five districts in Youngyang-gun. Five districts are located in Subi-myun Sinam-ri, nine districts in Chunggi-myun Haehwa-ri and Moojin-ri, and eleven districts in Sukbo-myun Posan-ri. The first highest score of suitability for waste disposal sites is shown at number eleven district in Chunggi-myun Moojin-ri and the second highest one is discovered at number twenty one district in Sukbo-myun Posan-ri that is followed by number nine district in Chunggi-myun Haehwa-ri, number seventeen and twenty three in Sukbo-myun Posan-ri, and number two in Subi-myun Sinam-ri. The first lowest score is found in number six district in Chunggi-myun Haehwa-ri, and the second lowest one is number five district in Subi-myun Sinam-ri. Finally, the Geographic Information System (GIS) helps to select optimal sites with more objectively and to minimize conflict in the determination of waste disposal sites. It is important to present several potential sites with objective criteria for establishing waste disposal facilities and to discover characteristics of each potential site as a result of that final sites of waste disposal are determined through considering thought of residents. This study has a limitation of criteria as a result of the restriction of availability of data such as underground water, soil texture and mineralogy, and thought of residents. To improve selection of optimal sites for a waste disposal facility, more wide rage of spatial and non-spatial data base should be constructed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.5
• /
• pp.721-734
• /
• 2022

This study analyzed the spatio-temporal variation characteristics of major environmental factors such as primary productivity (PP), chlorophyll a, nutrients, sinking particle matters, and organic contamination and biochemical composition of surface sediment on a monthly basis for approximately 2 years around shellfish mariculture in Jaran Bay, Korea. In addition, PP in Jaran Bay was compared with that in other coastal areas and related policy plans were proposed. The average PP of the study area was high in summer and autumn with 6.43~115.43 mgC m^-2 hr^-1 range. This was lower than that in Gamak Bay and Masan Bay, whereas higher than that in Garorim Bay and the West Sea. The PP in coastal waters, where many aquaculture farms were distributed, significantly fluctuated. The different size compositions of phytoplanktons constituting chlorophyll a slightly varied by month, and little restriction existed on the productivity of phytoplanktons owing to the depletion of nutrients. Typically, the Redfield ratio was less than 16, indicating that nitrogen was the limiting factor for the growth of phytoplanktons. The biochemical composition of particulate organic matters in the water column showed the highest carbohydrates, but lipids and protein contents were high in surface sediments. The concentration of TOC and AVS of the surface sediments was high at inside of bay, and sometimes, exceeded the environmental criteria of fishing grounds. The organic C:N ratio of sediments ranged from 8.1 to 10.4 on average. PP had the highest correlation with chlorophyll a, nitrogen and protein of particle organic materials. Recently, chlorophyll a, DIN, and DIP of water column trends tended to decrease, however, the contamination of sediments increased. Considering the annual PP of 125.9 gC m^-2 yr^-1 and mariculture area (oyster) of 4.97 km², the annual carbon production from phytoplanktons was estimated to be about 625 tons, and the annual total wet weight of shellfish (oyster) was estimated to be about 6,250 tons.

• The Korean Journal of Malacology
• /
• v.17 no.1
• /
• pp.19-26
• /
• 2001

To study the growth of transplanted Pacific oysters, Crassostrea gigas, we sampled Korean and Japanese oysters attached in Chinhae Bay near Gaduk Island and in Seto inland sea in Japan, respectively, suspended in Pukman Bay. Water Temperature ranged from 11.2 to 27.8$^{\circ}C$ (mean 19.84 ${\pm}$ 5.47$^{\circ}C$) on the surface, and 11.1 to 23.6$^{\circ}C$ (mean 18.31 ${\pm}$ 4.18$^{\circ}C$) on the bottom. Salinity ranged from 31.45 to 34.57 (mean 33.10 ${\pm}$ 1.16) on the surface, and from 31.69 to 34.35 (mean 33.24 ${\pm}$ 1.06) on the bottom. salinity was the lowest in September and October, and the highest in December. Growth of oysters in shell height showed a significant difference after being suspended at the farm, reaching 70.3 ${\pm}$ 12.5 mm in the Korean oysters and 96.2 ${\pm}$ 14.6 mm in the Japanese oysters in December. While the Korean oysters showed relatively low growth rate and cessation of growth after sudden growth between June and July, the Japanese oysters showed continuous growth during the whole farming period, although stepwise growth was observed. It was not until September that meat weight showed a significant difference between the two. After September, there was a sudden increase in the Japanese oysters, reaching 7.5 ${\pm}$ 2.9 g in December, but growth of the Korean oysters showed slow growth rate during whole farming period, reaching 4.6 ${\pm}$ 1.9 g in December. here was an obvious decrease in the meat weight of Japanese oysters in December, which might be attributed to restriction of food. Condition factors rebounded in October in the Korean oysters and in September in the Japanese oysters, respectively, attaining 12.8 in the Korean oysters and 15.3 in the Japanese oysters at the end of investigation on December. Shell length-height regression equations were as follows: Korean oysters: S$\sub$h/=2.922S$\sub$t/,-4.8024 (r$^2$= 0.8541) Japanese oysters: S$\sub$t/=3.623S$\sub$h/,-5.1239 (r$^2$=0.7782) This showed the possibility of morphological transformation in the shell of the Korean oysters since shell height was longer than those reported by Bae et al. (1976) and Lee et al. (1992).

• Journal of the Korean Geographical Society
• /
• v.31 no.3
• /
• pp.489-507
• /
• 1996

The purpose of this study is to examine the increasing number of unregistered manufacturing plants and related problems, and to recommend alternative solutions to the problems. Data are obtained from a field survey of randomly selected small scale manufacturing plants in Seoul and its suburban cities. A total number or respondents are 533, and 416 of them are unregistered plants. The Capital Regional Planning has had a goal during last three decades to lead a balanced regional economic development by restriction manufacturing plants in the Capital Region and by encouraging them in other regions in the nation. It was 1984 when a comprehensive planning was established to achieve this goal. Sets of various regulations, by-laws and codes have been implemented to regulate manu-facturing activities in the Capital Region to achieve the goal. The region is divided into three sub-regions, and a different degree of regulations is applied to each sub-region. Only a certain types of industries are allowed in a particular sub-region. For instance, a plant manufacturing high-technology products could be allowed in the most urbanized sub-region. All manu-facturing plant in the Capital Region which has ares size of larger than 200"\;"$m^2$ is compulsory to register to the local government office. In practice, however, it is not common or sometimes almost impossible to get approval for many applicant manufacturers because of strict regulations. There have been increasing number of plants in the Capital Region during last several decades, despite the strict regulations. Many of those newly established plants are without formal registration at the local administration office. howerver. These are so called 'unregisterd' plants. Surveyed data and many government official data show that many of unregistered plants have been established in recent years. which indicate that current regulations are no longer effective. The number of unregistered plants are increasing tin the Capital Region because of many locational advantages in the region for plants, particularly those in small scale. Unregistered plants are the source of many problems, such as local water pollution or noise pollution in residential areas. There are also many administration problems, bed\cause they are not registered. The central government has attempted to cure the problems of unregistered plants. For example, the government allowed a unregistered plant to remain at present site for three ydars, if it met certain conditions in three years. However, this program was unsuccessful because many of those plants were not able to meet the concitions. Three times the government renewed the term for those which did not meet conditions since 1989, but it was afraid to be without success. There are many evidences that current policies to control manufacturing plants are not effective. The Capital Region must face mounting problems if ploicies are not reformed soon. This study suggests that the policy of the Capital Regional Planning has to be reoriented to provide more favorable policies for manufacturing plants in the Capital Region than current regulations which is aimed to restrict manufacturing activities. It is time to improve many existing problems in the region through reforms and of current regulations to foster unregistered plants. This study also proposes many smaller-area sub-divisions instead of current three large area sub-regions which is too broad to apply single kind of regulation, or codes. Flexible regulations and codes can be applied to such a small-area sub-divivisions based on location and industrial characteristics of the individual sub-divisions. It is necessary to provide decent industrial environment in the Capital Region, which is best equipped to provide many favorable industrial locational factors in the nation, thus this nation can be further prepared to compete in an inter-national market at an era of globalization in manufacturing.

• Journal of Korean Society of societal Security
• /
• v.4 no.2
• /
• pp.73-78
• /
• 2011

In order to resolve the problem of change in global climate which is worsening as days go by and to preemptively cope with strengthened restriction on carbon emission, the government enacted 'Framework Act on Low Carbon Green Growth' in 2010 and selected green technology and green industry as new national growth engines. For this reason, the necessity to use the un-utilized waste heat across the whole industrial system has become an issue, and studies on and applications of recycling in the agricultural and fishery fields such as cultivation of tropical crops and flatfishes by utilizing the waste heat and thermal effluent generated by large industrial complexes including power plants are being actively carried out. In this study, we looked into the domestic and overseas examples of having utilized waste heat abandoned in the form of power plant thermal effluent, and carried out economic efficiency evaluation of sturgeon aquaculture utilizing thermal effluent of Yeongwol LNG Combined Cycle Power Plant in Gangwon-do. In this analysis, we analyzed the economic efficiency of a model business plan divided into three steps, starting from a small scale in order to minimize the investment risk and financial burden, which is then gradually expanded. The business operation period was assumed to be 10 years (2012~2021), and the NVP (Net Present Value) and economic efficiency (B/C) for the operation period (10 years) were estimated for different loan size by dividing the size of external loan by stage into 80% and 40% based on the basic statistics secured through a site survey. Through the result of analysis, we can see that reducing the size of the external loan is an important factor in securing greater economic efficiency as, while the B/C is 1.79 in the case the external loan is 80% of the total investment, it is presumed to be improved to 1.81 when the loan is 40%. As the findings of this study showed that the economic efficiency of sturgeon aquaculture utilizing thermal effluent of power plant can be secured, it is presumed that regional development project items with high added value can be derived though this, and, in addition, this study will greatly contribute to reinforcement of the capability of local governments to cope with climate change.

• Korean Journal of Environment and Ecology
• /
• v.33 no.4
• /
• pp.453-461
• /
• 2019

This study was conducted to monitor the soil characteristics and growth of Pinus densiflora and to determine the effect of soil characteristics on growth rate five years after an ecological restoration project in Baekdudaegan ridge including Ihwaryeong, Yuksimnyeong, and Beoljae sites. The ecological restoration project was executed with the forest of P. densiflora in 2012-2013. In April 2018, we collected soil samples from each site and measured the height and the diameter at breach height (DBH) of P. densiflora. Although there was no significant change of soil pH compared to the early stage of restoration (one year after the project), it was high in Ihwaryeong, and Beoljae with values of 7.7 and 6.4, respectively. Also, the organic matter decreased by 70-80%, and the available phosphorus (P) was unchanged in three restoration sites. The decreased organic matter can be attributed to restriction of inflow and thus decomposition of litter in the early stage after the restoration. The tree height growth rate ($m\;yr^{-1}$) of P. densiflora in Yuksimnyeong was the highest at 1.02, followed by Beolja at 0.75 and Ihwaryeong at 0.17. The height growth rate showed negative relationships with soil pH and cations, including Na and Ca concentrations and a positive relationship with available phosphate. The low growth rate in the Ihwaryeong site, in particular, might result from the poor nutrient availability due to high soil pH and the decrease in water absorption into the root due to high Na and Ca concentrations. The substantial reduction of organic matter after five years indicates that the need for soil improvement using chemical fertilizer and biochar.