• Journal of the Mineralogical Society of Korea
• /
• v.23 no.3
• /
• pp.235-242
• /
• 2010

Froth flotation using the residual water in the end of flotation process has been performed through controlling of pH. IEP (isoelectric point) of molybdenite and quartz in distilled water was below pH 3 and pH 2.7, respectively and the stabilized range was pH 5~10. In case of a suspension in reusing water, zeta potential of molybdenite decreased to below -10 mV or less at over pH 4 due to residual flocculants. As result of pH control, flotation efficiency in the alkaline conditions was deteriorated by flocculation, resulting from expanded polymer chain, ion bridge of the divalent metal cations ($Ca^{2+}$), and hydrophobic interactions between the nonpolar site of polymer/the hydrophobic areas of the particle surfaces. However, the weak acid conditions (pH 5.5~6) improved the efficiency of flotation as hydrogen ions neutralize polymer chains and then weakened its function. In cleans after rougher flotation, the Mo grade of 52.7% and recovery of 90.1% could be successfully obtained under the conditions of 20 g/t kerosene, 50 g/t AF65, 300 g/t $Na_2SiO_3$, pH 5.5 and 2 cleaning times. Hence, we developed a technique which can continuously supply waste water filtered from tailings into the grinding-rougher-cleaning processes.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.530-548
• /
• 2022

The site selection process for deep geological disposal of high-level radioactive waste will be conducted in stages, and 103 evaluation parameters related to site selection have been proposed. In the field of rock mechanics and rock engineering, there are 33 evaluation parameters for intact rock, joint and rock mass, and they are applied in the basic and detailed investigation stages. In this report, uniaxial compressive strength, in-situ stress, joint distribution, and rock mass classification were selected as the main evaluation parameters, and among them, uniaxial compressive strength and in situ stress were selected as key evaluation parameters. Statistical techniques or regression analysis were performed for granite in Wonju and Chuncheon to evaluate the distribution range for the selected key evaluation parameters. The average of the uniaxial compressive strength in the Wonju area estimated through the posterior distribution is about 171 MPa, and about 123 MPa in the Chuncheon area. The maximum in situ stress acting in the Wonju area was less than 30 MPa and less than 40 MPa in the Chuncheon area. The direction of the maximum horizontal stress calculated by regression analysis was 101° in Wonju, and in the case of Chuncheon, it was 95°, respectiviely.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.21 no.3
• /
• pp.27-45
• /
• 2018

Both the national land plan and the environmental plan reflect the need for sustainable land use and management. However, the linkage between the plans is reduced due to the lack of integrated management. Therefore, this study developed indicators to achieve integrated management. A total of 59 environmental plans were reviewed for the development of indicators, and a total of 74 integrated management indicators were derived through a three-stage process. In this process, the relevance of the integrated management indicators of this study to the UN 's sustainable development goals (SDGs) is presented in order to derive indicators that meet the level of international consultation. In order to facilitate the utilization of the indicators, the final indicators are divided into seven areas: natural ecology, water resource and quality, urban and green space, atmospheric, energy, landscape, resource circulation and waste. Furthermore, the indicators were classified into national, regional, and city level. Accordingly, the final indicator can be adapted to the field of influence of the planned to be established, and the indicator can be selected and applied to the level of the plan. The final indicators can be used to examine the extent to which the national plan reflects the contents of the environmental plan and can be used as an aid to confirm the contents to be included in the plan when establishing a new national plan.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.3
• /
• pp.372-385
• /
• 2014

Lignin is an abundant natural polymer in the biosphere and second only to cellulose; however, it is under-utilized and considered a waste. In this study, lignin was fabricated into nanofibers via electrospinning. The critical parameters that affected the electrospinnability and morphology of the resulting fibers were examined with the aim to utilize lignin as a resource for a new textile material. Poly(vinyl alcohol) (PVA) was added as a carrier polymer to facilitate the fiber formation of lignin, and the electrospun fibers were deposited on polyester (PET) nonwoven substrate. Eleven lignin/PVA hybrid solutions with a different lignin to PVA mass ratio were prepared and then electrospun to find an optimum concentration. Lignin nano-fibers were electrospun under a variety of conditions such as various feed rates, needle gauges, electric voltage, and tip-to-collector distances in order to find an optimum spinning condition. We found that the optimum concentration for electrospinning was a 5wt% PVA precursor solution upon the addition of lignin with the mass ratio of PVA:lignin=1:5.6. The viscosity of the lignin/PVA hybrid solution was determined as an important parameter that affected the electrospinning process; in addition, the interrelation between the viscosity of hybrid solution and the electrospinnability was examined. The solution viscosity increased with lignin loading, but exhibited a shear thinning behavior beyond a certain concentration that resulted in needle clogging. A steep increase in viscosity was also noted when the electrospun system started to form fibers. Consequently, the viscosity range to produce bead-free lignin nanofibers was revealed. The energy dispersive X-ray analysis confirmed that lignin remained after being transformed into nanofibers. The results indicate the possibility of developing a new fiber material that utilizes biomass with resulting fibers that can be applied to various applications such as filtration to wound dressing.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.149-154
• /
• 2007

The zinc prosphate film treatments used to lubricating treatment of mostly cold forging processes. But there are several problems happened to lubricating treatment process such as happening harmful environment on person, complex lubrication processing occurring in energy and time consumption, eco-destructive and chemical by-product generation, the needs of waste disposal etc. As a result, a water-soluble lubricant was developed to replace the perfect or some of the zinc prosphate film in the world. In order to solve these problems, this study evaluated the performance of the typical water-soluble. In this study, for these requirement inquiry of two part. First, about possibility of replace zinc phosphate lubricant, quantitatively evaluation developed of water-soluble lubricant for cold forging vs zinc phosphate lubricant. Second, About optimization of coating Process use to equipment with practicable automatic coating Process. The performance evaluation of these lubricants was conducted using the double cup extrusion test and spike forging test. With the use of the commercial FE code DEFORM, friction factor calibration curves, i.e. cup height ratio vs. punch stroke and spike height vs. punch stroke, were established for different friction factor values. By matching the cup height ratio and the punch stroke and spike height vs. punch stroke from experiment to that obtained from FE simulations, the friction factor of the lubricants was determined. Survey of comparative analysis use to SEM that sprayed lubricant surface structure of grain shape and characteristic of lubricant performance based on grain shape and deformed lubricant surface expansion. As a result, developed lubricant were found to perform comparable to or better than zinc phosphate. And thought this result, innovatively cope with generated problem of existing lubrication process.

• Architectural research
• /
• v.15 no.2
• /
• pp.59-68
• /
• 2013

To ameliorate a long-standing, persistent housing shortage in Korea, large-scale massive housing production has been an imperative, and the extensive growth highly values development and consumption. The state's priority for the quantitative growth of housing stock has proved to be successful, but the state faces with economic and environmental crises in a global era. To achieve the qualitative growth, the previous administration pronounced a green growth policy from the inception, and a series of strategic measures under a holistic plan have been taken widely and vigorously. As part of the strategies, the green home project was undertaken, and simultaneously the movement of green living led by the governance has been activated. However, little attention to the grassroots effort was paid and the efficacy hasn't been adequately addressed. This study examines the factors affecting green living of residents in multifamily housing. Based on public guidelines to green living, 106 specific items were drawn out and largely categorized into 6 areas (water, waste, transportation, air quality, consumption, and energy), and the questionnaire was constructed using them. Of 750 survey forms mailed out, 161 responses were returned and the collected data were used for statistical analysis. The findings indicated that varying degrees of green living was well practiced, the state-led green home project was relatively well recognized, and the green growth policy was strongly supported. Also the respondents' attitude toward green living were more associated with demographic variables than housing characteristics, and familiarity with green home project was related to attitudes toward green living. Since the on-going approach to green living has focused on simple and economical ways, it has proved to be effective but progressive strategies to make living greener are necessarily developed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.4
• /
• pp.848-854
• /
• 2017

Recently, false reports to governmental offices such as police stations have not been decreased. As a result, if a violent crime or a fire occurs that needs to be promptly responded to and reacted to these accidents in real time, it may lead to serious results such as loss of life. Also, the waste of police enforcement and administration due to false reporting can cause serious problems. In this paper, we try to clarify the difference between the actual and false reports based on the actual sound sources which were reported to the police stations. In addition, we will intend to develop a false report discrimination system that can identifies false reports and actual reports based on this.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.10
• /
• pp.544-551
• /
• 2015

This study was conducted to determine the LCC of apartment complexes with district heating and a cogeneration system. For the purpose of analyzing LCC according to the size of the apartment complex, 500, 1,500, and 4,000-unit model apartments were selected. Analysis was performed on the design of the heating system and the life cycle cost including total construction cost, maintenance and operation cost for the duration of the project period (15 years). According to the calculated results, 1) The initial cost of the cogeneration system for 500, 1,500, and 4,000-unit apartments is higher than that of the district heating system by 20%, 13%, and 12%, respectively. 2) In the case of the cogeneration system, the payback period by electric generation was found to be 5.21, 4.92 and 4.47 years, and saving cost was calculated to be 29 billion won, 94 billion won and 262 billion won after the payback period for 500, 1,500, and 4,000-unit apartments, respectively. 3) The LCC values of the cogeneration system were 1.12, 1.07 and 1.06 times larger than those of the district system according to the size of the apartment complex. In this study, the district heating system was found to be more efficient than the cogeneration system in terms of LCC reduction. 4) District heating is affected by fuel bills, so energy efficiency should be improved through recovering waste heat (incineration heat, etc.). Also, district cooling should be provided according to heat use to keep the temperature high in winter and low in summer.

• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.41-48
• /
• 2024

The construction industry is a significant contributor to carbon emissions, with its life cycle emissions posing significant environmental challenges. Despite its increasing importance, embodied carbon (EC) generated from the construction process is often ignored. Modular construction (MC), characterized by a combination of off-site manufacturing and on-site assembly, has been recognized for its potential to contribute to environmental benefits. However, there is still a lack of systematic explanation of urban high-rise MC. This study aims to identify whether and to what extent high-rise MC can achieve EC reductions and lay the foundation for effective carbon reductuons in the construction industry. To achieve this, the study develops a multi-level EC measurement framework for assessing EC during the construction process, using a real case to quantify the EC and determine carbon reduction performance. The innovation is a more comprehensive understanding of the boundaries of EC, as MC includes the amount of superstructure work and decoration integration. The results show that although the MC will increase EC from the transportation stage due to heavier modules, it achieves a net reduction in total EC by reducing on-site machinery energy consumption and waste rates. In conclusion, this study contributes to a better understanding of the EC emissions associated with high-rise MC, offering a valuable measurement framework for global regions evaluating the EC impacts of high-rise MC in similar contexts.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.5
• /
• pp.39-54
• /
• 2002

There have been endeavors for sustainable development all over the world after the Rio World Summit and the idea of sustainable development has become common paradigm. Now, Korea has come to a situation where we need to apply the concept of sustainable development inevitably. Especially housing estate development must be preliminary change for sustainable development. Therefore, the objectives of this study were to establish sustainable planning element system of housing estate, and to propose a sustainable planning model compatible with the Korean situation. The scope of this study focused on typical multi-family housing estates in Korea and the environmental sustainable planning model. The model was developed from the evaluation of the important level and extra costs of planning elements for sustainable development of housing estate. The important level of planning principles and elements was analyzed by conducting a survey to experts. As the results of this study, four planning section ('land use and transport', 'pollution and waste', 'energy', and 'natural resource') and twelve planning items were identified. Twenty-one planning principles and fifty-five planning elements were found. Synthetically, the sustainable planning element system is composed of four planning sections, twelve planning items, twenty-one planning principles, and fifty-five planning elements. Based on survey to experts, $\ulcorner$The short-term strategic model$\lrcorner$ was developed for the social implosion of sustainable development, which is composed of ten basic elements, eighteen necessary elements, twelve optional elements, and seven arbitrary elements. $\ulcorner$The long-term future model$\lrcorner$was developed for application to from 10 to 15 years later. It is composed of fifteen basic elements, thirty-three necessary elements, and seven optional elements. The planning model proposed by this study can be used as a prototype for the development of a sustainable housing estate and can provide a practical tool for developers and planners who are not familiar with the concept of sustainable development.