• 한국정밀공학회지
• /
• 제24권2호
• /
• pp.73-85
• /
• 2007

The rear lateral collision warning system using fuzzy control algorithms is discussed in this paper. Common rear lateral warning system has many problems. For example if target vehicle comes into the warning area, it must unconditionally warn. Drivers could be interrupted by it. To solve the problem, I divided measuring area into two sections. One section is blind area of vehicle and the other rear lateral area. For blind area, obtained data was filtered inefficient warning signal by using relative velocity method. For rear lateral area, a fuzzy logic algorithm is used to recognition of obstacles. According to our experiment relative velocity method and fuzzy logic algorithms were very efficient.

• 한국멀티미디어학회논문지
• /
• 제8권1호
• /
• pp.46-55
• /
• 2005

본 논문에서는 소형 위협체를 조기에 탐지하여 위치를 알려주는 파노라믹 적외선 영상 경보 장치를 구현하였고, 경보 성능 향상을 위한 적외선 영상 향상 기법을 제안하였다. 구현 장치는 센서 헤드 유닛, 신호 처리 유닛 등으로 구성된다. 센서 헤드 유닛은 1차원 다중 배열 적외선 센서를 정속으로 고속 회전하여 360도의 넓은 시계 영역을 가지는 파노라믹 열영상을 획득한다. 신호 처리 유닛은 파노라믹 영상을 90도의 부영상으로 나누고, 각 부영역의 통계적 특성에 따라 적응적 평탄역값(adaptive plateau value)을 구한다 그리고 적응적 평탄역값으로 히스토그램을 변화시킴으로써 위협체을 두드러지게 하였으며, 실시간 처리를 위하여 DSP와 FPGA를 이용하여 장치를 구현하였다. 구현 시스템에 제안한 영상 향상 기법을 적용한 결과 기존 기법에 비해 오경보율이 낮음과 시각적으로 위협체의 식별이 용이함을 확인하였다.

• 한국ITS학회 논문지
• /
• 제8권2호
• /
• pp.53-59
• /
• 2009

교통 분야와 IT 분야의 접목은 기반시설 투자를 통해 해결하려했던 사회적 경제적 문제를 해결하는 새로운 해결책으로 떠오르게 되었고 지능형 교통 시스템 및 텔레매틱스와 같은 새로운 산업을 창출하였다. 특히, 지능형 교통 시스템 및 텔레매틱스 기술 분야 중 차량 통신 분야는 중요 부분으로 인식되고 있으며, 최근 단거리 전용 무선 통신 기술은 국내 지능형 교통 시스템 산업 분야에서 중요한 기술 분야로 인식되고 있다. 단거리 전용 무선 통신은 자동요금징수(ETCS) 시스템을 통해 운전자용 단말기 보급이 활발히 진행되고 있다. 교통 신호 제어 분야에서도 이 기반 시설을 활용한 양질의 실시간 정보를 활용하여 최적의 교통 신호 제어 시스템을 구현하려는 연구가 활발히 진행되고 있으며 WISDOM의 연구개발이 성공적으로 마무리되어졌다. 본 논문에서는 연구 개발된 개별 차량 기반의 신호제어 시스템 WISDOM을 활용하여 교차로 안전 지원 동적 딜레마 경고 서비스를 개발하고 현장 실험을 통하여 신뢰성과 실용성을 평가하였다. 제안된 동적 딜레마 경고 시스템은 교차로에서 WISDOM에 의해 최적화된 동적 교차로 신호에 대한 정보를 방송하고 이를 수신한 차량 단말기는 자신의 위치와 속도를 바탕으로 딜레마 영역을 만들고 운전자에게 경고하도록 하였다.

• 한국군사과학기술학회지
• /
• 제16권2호
• /
• pp.214-217
• /
• 2013

In this paper, we proposed an automatic threshold control method for radar warning receiver. Considering the noise level of the environment, this technique can effectively adjust sensitivity level of radar warning receiver and can offer more accurate radar information for aircraft pilot in noisy circumstances.

• 한국전자파학회논문지
• /
• 제20권11호
• /
• pp.1171-1177
• /
• 2009

전차 탑재 레이더는 기상에 관계없이 전천후로 대전차 미사일을 탐지하는 능동 방호 장치의 필수적인 센서이다. 본 논문에서는 전차 탑재 미사일 경고 레이더를 소개하고, 주요 핵심 기술로 고속의 멀티 DSP를 이용한 신호 처리기를 설계 및 제작 결과를 제시하였다. 핵심 알고리즘으로는 어댑티브 CFAR, 가중 선형 근사 알고리즘, 소프트웨어 추적, 위협 분석 등을 구현하였으며, 시험 결과를 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.400-403
• /
• 2003

This paper presents the signal processing of the panoramic thermal warning system that detects the small target such as aircraft and helicopter from afar. We develope the all round looking thermal imaging system which can scan all the way. This system acquires the panoramic images to reconstruct the IR images by revolving head of sensor typed line sensor at high speed. For detection, where the object of interest may be small, it is sometimes difficult to specify from object and background by conventional contrast enhancement methods. Therefore we use the adaptive plateau equalization algorithm each region to improve the contrast and make the hardware system which consists of the signal processing board for real-time display. We can verify the proposed method by the computer simulation and the hardware implementation.

• International Journal of Railway
• /
• 제1권4호
• /
• pp.149-156
• /
• 2008

During maintenance or construction works in or at the tracks of railways, high risks for passengers and railway staff, especially for the workers on the construction site exist. The high risks result out of the movement of rail vehicles, like trains or construction vehicles, which must be faced by using any available technical and operational technologies for securing them against the environment. Therefore, it is necessary to evaluate the level of protection continuously and to identify new and innovative methods and technologies for the protection of the gang (construction worker, machines and material). Especially on construction sites at line sections with two or more parallel tracks but also with single tracks, there are still a lot of incidents and accidents mostly with seriously injured persons or fatalities. These were mainly gang members that breach the railway-loading gage. By using proper warning or protection systems, the avoidance of such accidents must be achieved. The latest developments. in gang protection systems concern on the one hand fixed barriers in the middle between the construction site and the operated track and on the other hand construction vehicles equipped with automatic warning systems. The disadvantage of such protection methods is that the gang can be warned against an approaching train but a monitoring of the gang members cannot be performed. Only one part of a potential dangerous situation will be detected. If the gang members will overhear the acoustic warning signal of the security staff and the workers will not leave the danger zone in the track, the driver of the approaching train had no chance to react to the dangerous situation. An accident is often inevitable. While the detection of acoustic warning signals by the gang members working on a construction site is very difficult, the acoustical planning of an automatic warning system has to be designed for an acoustic short range level of one meter besides the construction vehicle. The decision about the use of today's technical warning system (fixed systems, automatic warning systems, etc.) must be geared to the technical feasibility and the level of safety which is needed. Criteria for decision guidance to block a track should be developed by danger estimation and economical variables. To realize the actual jurisdiction and to minimize the hazards of railway operations by the use of construction vehicles near the tracks further developments are needed. This means, that the warning systems have to be enhanced to systems for protection, which monitor the realization of the warning signal as a precondition for giving a movement authority to a train. This method can protect against accidents caused by predictable wrongdoing. The actual state of the art technique of using a collective warning combined with additional security staff is no longer acceptable. Therefore, the Institute of Transportation System of the German Aerospace Center in Braunschweig (Germany) will develop a gang warning and protection system based upon imaging methods, with optical sensors such as video in visible and invisible ranges, radar, laser, and other. The advantage of such a system based on the possibility to monitor both the gang itself and the railway-loading gauge either of the parallel track or of the same track still in use. By monitoring both situations, the system will be able to generate a warning message for the approaching train, that there are obstacles in the track, so that the train can be stopped to prevent an accident. And also the gang workers will be warned, while they breach their area.

• 한국자원공학회지
• /
• 제55권6호
• /
• pp.604-613
• /
• 2018

본 연구에서는 블루투스 비콘이 송신하는 저전력 블루투스 신호의 세기와 전파 방향성에 따른 수신 강도(Received Signal Strength Index, RSSI) 변화를 분석하였다. 자수정 지하광산에서 스마트폰을 이용하여 저전력 블루투스 신호의 RSSI 변화를 조사한 결과, 무지향성 비콘의 경우 비콘과 스마트폰 사이의 거리가 감소할수록 신호 세기가 증가할수록 RSSI 평균이 점차 증가하였다. 지향성 비콘의 RSSI 평균은 비콘과 스마트폰이 마주 보는 각도와는 연관성 없이 변화하였다. 본 연구의 결과는 블루투스 비콘 기반의 지하광산 근접경고시스템 개발을 위한 기초자료로 활용될 수 있을 것이다.

• 전기학회논문지P
• /
• 제66권2호
• /
• pp.82-87
• /
• 2017

This paper presents performance improvement of CO gas sensor signal conditioner for early fire warning system. The warning system is based on the CO sensor and its advanced signal conditioning modules network that employ electochemical gas sensor. The electochemical has advantage of having a linear output and operating with a low consumption and fast response. This electrochemical gas sensor contains a gas membrane and three electrodes(working, counter, reference electrode) in contact with an electrolyte. To use a three-electrode sensor, a voltage has to be applied between the working and the reference electrode according to the specification of the sensor. In this paper, we designed these requirements that should be considered in temperature compensation algorithm and electrode measurement of CO sensor modules by using advanced signal conditioning method included 3-electrode. Simulation and experimental results show that signal conditioner of CO sensor module using 3-electrode have a advantage linearity, sensitivity and stability, fast response etc..

• 센서학회지
• /
• 제20권3호
• /
• pp.162-167
• /
• 2011

In this paper, we propose a vision system using a field programmable gate array(FPGA) and a smart vision chip. The output of the vision chip is varied by illumination conditions. This chip is suitable as a surveillance system in a dynamic environment. However, because the output swing of a smart vision chip is too small to definitely confirm the warning signal with the FPGA, a modification was needed for a reliable signal. The proposed system is based on a transmission control protocol/internet protocol(TCP/IP) that enables monitoring from a remote place. The warning signal indicates that some objects are too near.