• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.147-148
• /
• 2006

Recently, due to increasing the application of power electronic equipment, harmonics generated from the non-liner load are fairly produced. Harmonics can cause a variety of problems such as the overheating of distribution transformer, the breakdown of device and communication interference. Interest about power quality decline of power system is very increased. In this paper, we are measured the harmonic voltage and current o( power system to analyze harmonic characteristics, and it is analyzed Total Harmonic Distortion(THD). Also, we Ere modeled power system using PSCAD/EMTDC. And it is analyzed harmonic voltage and current in steady-state. The study results have been indicated the utility about harmonics analysis and modelling for power system.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.202-204
• /
• 2005

This paper presents the formulation for developing 2 port Frequency Dependent AC System Equivalent(FDACSE) with the instantaneous term in 5-domain and illustrates its use. This 2 port FDNE have been applied to the New Zealand AC system. The electromagnetic transient package PSCAD/EMTDC is used to assess the transient response of the 2 port (FDACSE) developed with Norton Equivalent network. The study results have indicated the robustness and accuracy of 2 port FDACSE for electromagnetic transient studies.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.205-207
• /
• 2005

In this paper, the Point of Common Coupling (PCC) is selected to analyze harmonic characteristic of distribution system by IEC 61000 - 3 - 6 in Electromagnetic Compatibility(EMC). Harmonic voltage and current were measured at the PCC of real distribution system. Harmonic distribution, nonlinear load component and Total Harmonic Distortion(THD) were verified by measurement. The effective and accurate modelling of real distribution system were proved through a analysis of harmonic impedance, voltage and current in steady-state. Harmonic transfer characteristic in distribution system were summarized and investigated through a analysis of harmonic voltage and harmonic current in harmonic current source.

• Journal of Industrial Technology
• /
• v.31 no.B
• /
• pp.67-73
• /
• 2011

Ceramic metal halide lamps have been widely used due to long lifetime, high luminous efficiency and good colour rendering. In this paper, we developed dimming control system of electronic ballast for 70W ceramic metal halide lamp by using 1-10V interface. The proposed electronic ballast is consists of EMI filter, Full-wave rectifier, Active PFC, DBI(Dual Buck Inverter), Igniter and control circuit.It enables to supply both low-frequency rectangular wave voltage and current to the lamp by using DBI(Dual Bcuk Inverter) structure. By using 1-10V interface, the system that able to dimming the lamp is demonstrated by P-spice simulation and experimental results.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.91-93
• /
• 2009

In this paper, we present the Q-learning method for adaptive traffic signal control on the basis of In this paper, we present the Q-learning method for adaptive traffic signal control on the basis of multi-agent technology. The structure is composed of sixphase agents and one intersection agent. Wireless communication network provides the possibility of the cooperation of agents. As one kind of reinforcement learning, Q-learning is adopted as the algorithm of the control mechanism, which can acquire optical control strategies from delayed reward; furthermore, we adopt dynamic learning method instead of static method, which is more practical. Simulation result indicates that it is more effective than traditional signal system.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1143-1144
• /
• 2008

본 논문에서는 motion-blur를 감소시키는 overdriving 기술의 오류를 감소시키기 위해 hybrid image coding 방법을 제안한다. hybrid image coding방법은 luminance data Y을 압축하기 위한 새로운 Adaptive Quantization Coding (AQC)을 제안하고 chrominance data CbCr을 Block Truncation Coding (BTC)방법으로 압축하는 것이다. 시뮬레이션 결과는 기존의 PSNR과 SD의 비교를 통하여 HIC의 우수함을 확인하여 알고리즘의 효율성을 검증하였다. 제안된 알고리즘은 verilog HDL를 통해 구조를 구현하고 synopsys design compiler를 통하여 합성 $0.13{\mu}m$ Samsung Library구조의 효율성을 확인하였다.

• Journal of Industrial Technology
• /
• v.29 no.B
• /
• pp.193-198
• /
• 2009

In this paper, we developed remote dimming control system of electronic ballast for 400W metal halide lamp. This ballast could limit ignition current and soft start-up technique by the inverter with LCsCp resonance tank. The dimming circuit can dim from 400W to 200W by varying of the inverter switching frequency. The PLM consists of coupling circuit, BPF(Band-Pass Filter), FSK(Frequency Shift Keying) Modem and ${\mu}$-controller(Micro Controller). By coupling electronic ballast with PLM, the system that able to dimming the lamp through PLM is demonstrated by experimental results.

• Korean Journal of Pharmacognosy
• /
• v.4 no.2
• /
• pp.75-82
• /
• 1973

In Korea, two species of Ho-chang-Ho-chang $(Polygonum\;cuspidatum \;S_{IEB}.\;et\;Z_{UCC}.)$ and Wang-Ho-chang $(Polygonum \;sachalinense\;F_R.\;S_{CHM}.)$-had been identified, but the components of the leaves of Polygonum species growing in Korea had never been reported. The authors examined the anatomical characteristics of Korean Polygonum species, identified the flavonoids contained in their leaves and obtained the following results: Korean Polygonum species should be divided into three species: $Polygonum\;cuspidatum\;S_{IEB}.\;et\;Z_{UCC}.,\;P. \;sachalinense\;F_R.\;S_{CHM}\;and\;P.\;elliptica\;M_{IGO}$. The last one was illustrated in the report. P. cuspidatum contained reynoutrin and quercitrin, but no isoquercitrin could be identified. P. sachalinense also contained both reynoutrin and quercitrin. P. elliptica, which had never been studied, included the same flavonoids.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.257-260
• /
• 1997

This paper designs the optimal PID controller for load frequency control on 2-area power system. Genetic algorithm is utilized to optimize parameters of PID controller which is applied to power system. Using two-point crossover, uniform crossover and one-point crossover, Search performance of genetic algorithm with each crossover method is considered. In case of load variation in 1-area, the dynamic characteristic of power system is considered. The simulation results show that the proposed PID controller is better control performance than PID controller using Ziegler-Nichols method.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2295-2296
• /
• 2008

본 논문에서는 에너지 절감을 위하여 POWER LED 구동회로를 PIR(Pyroelectric Infrared Ray) 센서를 이용하여 ON/OFF 제어를 하였다. POWER LED의 전류 특성을 설명하였으며 설명된 전류 특성을 개선하고자 정전류 유지 회로를 구성하였다. 그리고 인체 감지 센서에서 발생되는 ON/OFF 신호를 증폭시키는 구동 회로를 설계하여 정전류 유지 회로에 직접 결합하는 방식을 제안하였다. 실험한 결과는 POWER LED의 ON 상태시 4Watt, OFF 상태시 0.5Watt를 소비하였으며, 정전류 유지 회로에 의해 POWER LED 구동 전류의 리플이 줄어들어 안정적인 동작을 하는 것으로 나타났다.