• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4635-4642
• /
• 2013

The advanced absorbent that used amine mixture with different order were developed to separate carbon dioxide emitted from fossil fuel power plant. The carbon dioxide absorption capacity for mixtures with different amine(primary, secondary and tertiary) were investigated according to $CO_2$ partial pressure. The carbon dioxide absorption capacity at the same pressure is ordered as 3DMA1P 30wt%>3DMA1P 27wt%+MEA 3wt%>3DMA1P 27wt%+DEA 3wt%. The result indicates that mixing tertiary amine with primary amine yields more efficient carbon dioxide absorbent than mixing tertiary with secondary amine does. Finally, the predicted semi-empirical gas-liquid equilibrium model fitted with experimental results.

• Journal of the Korean Institute of Gas
• /
• v.24 no.5
• /
• pp.56-64
• /
• 2020

This study presents the hydrate induction time of PVCap according to subcooling temperature, salt concentration, and MEG concentration in order to analyze the inhibition effect of PVCap in various production environments of offshore gas fields. A high-pressure hydrate generator was made for the hydrate formation experiments. It was verified that the apparatus had sufficient reliability by comparing the results of hydrate equilibrium conditions and induction time from the apparatus with published reference data. As the subcooling temperature increased from 6.1℃ to 12.1℃, the induction time of PVCap concentration of 0.1~1 wt% decreased. When the salt concentration increased from 3 wt% to 7 wt%, the induction time was reduced by up to 78% under the condition of 0.5 wt% PVCap due to polymer structure degradation by salt effect. In the case of HHI (hybrid hydrate inhibitor) made by mixing MEG 10 wt% and PVCap, the change in induction time was not large compared to PVCap 1 wt% due to the under-inhibition effect. On the other hand, the hydrate inhibition efficiency of HHI with MEG 20wt% increased 1.7 times compared to PVCap.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.409-413
• /
• 2014

This study was carried out to design the optimum mixing ratio of aggregate, cyclic aggregate, and binder (moisture, emulsified asphalt, and emulsion type additives) and produce recycling cold asphalt paving mixture satisfying site work standard. The cyclic aggregate satisfying KS F 2572 was collected from waste asphalt by adequate processing. As the moisture content increased, the shearing strength was decreased. The maximum marshall stability was shown at the 3.0 wt% moisture content. So the optimum moisture content was 3.0 wt%. The marshall stability and flow value with the amount of emulsified asphalt was satisfied in the range of 0.5~2.5 wt%, and the porosity was satisfied in the range of 0.7~2.5 wt%. So the optimum amount of emulsified asphalt was 1.6 wt%. The optimum amount of emulsion type additive was 0.1 wt% in the light of marshall stability and degree of saturation of recycling cold asphalt mixture.

• Korean Journal of Materials Research
• /
• v.25 no.1
• /
• pp.43-47
• /
• 2015

$Zn(BH_4)_2$ was prepared by milling $ZnCl_2$ and $NaBH_4$ in a planetary ball mill in an Ar atmosphere, and XRD analysis, SEM observation, FT-IR analysis, DTA, and TGA were performed for synthesized $Zn(BH_4)_2$ samples. 90 wt% $MgH_2$+1.67 wt% $Zn(BH_4)_2(+NaCl)$+5 wt% Ni+1.67 wt% Ti+1.67 wt% Fe (named $90MgH_2+1.67Zn(BH_4)_2(+NaCl)$+5Ni+1.67Ti+1.67Fe) samples were also prepared by milling in a planetary ball mill in an $H_2$ atmosphere. The gas absorption and release properties of the $Zn(BH_4)_2(+NaCl)$ and $90MgH_2+1.67Zn(BH_4)_2(+NaCl)_2(+NaCl)$+5Ni+1.67Ti+1.67Fe samples were investigated. An FT-IR analysis showed that $Zn(BH_4)_2$ formed in the $Zn(BH_4)_2(+NaCl)$ samples prepared by milling $ZnCl_2$ and $NaBH_4$. At the first cycle at $320^{\circ}C$, $90MgH_2+1.67Zn(BH_4)_2(+NaCl)$+5Ni+1.67Ti+1.67Fe absorbed 2.95 wt% H for 2.5 min and 4.93 wt% H for 60 min under 12 bar $H_2$, and released 1.46 wt% H for 10 min and 4.57 wt% H for 60 min under 1.0 bar $H_2$.

• Food Science and Preservation
• /
• v.9 no.3
• /
• pp.287-291
• /
• 2002

This study was carried out to analyze the physical peroperties and components according to kinds and harvesting season for the Quality improvement and arangement of e99plants exporting in Japan. The size and weight of chukyang eggplants were larger than those of shikibu, and those of eggplants harvested in winter were smaller than those of eggplants in summer. The pH and brix were not different between cultivar of eggplants and were small different between harvesting seasons. The contents of glucose and fructose was 115.4∼155.4, 64.2∼102.1mg/100g-fr.wt., respectively. And total contents of free sugars was 211.4∼351.1mg/100g-fr.wt. and those of chukyang was higher than those of sikibu. Total contents of free amino acids were from 73.4mg/100g-fr.wt. to 111.8mg/100g-fr.wt and was higher in chukyang than shikibu. The contents of ascorbic acid and dehydroascorbic acid was 90.0∼118.3, 28.3∼32.3mg/100g-fr.wt., respectively. And total contents of ascorbic acids were 149.4, 119.9mg/100g-fr.wt., in eggplants harvested at summer. The content of potassium and sodium was 229.97∼233.59, 135.98∼156.28mg/100g-fr.wt., respectively. The total contents of minerals was 89.35∼420.2mg/100g-fr.wt., and those of chukyang was higher than those of shikibu.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.772-778
• /
• 1994

The pervaporation separation experiments of phenol-water mixtures were carried out by using Type 1 (PDMS : crosslinking agent= 1 : 0.25) and Type 2 (PDMS : crosslinking agent= 1 : 0.35) silicone rubber membranes at 30, 40 and $50^{\circ}C$. The phenol concentrations in the feed to be separated were 500 ppm to 5 wt%. Type 2 membranes were more efficient than Type 1 membranes for the separation of phenol-water mixtures. The phenol concentration of 70wt% was obtained for 5wt% of phenol concentration in the feed at $30^{\circ}C$ and 11wt% phenol concentration observed for 500ppm of phenol concentration in the feed at $30^{\circ}C$ by using Type 2 membranes.

• Journal of the Mineralogical Society of Korea
• /
• v.8 no.1
• /
• pp.29-36
• /
• 1995

연옥은 구성광물의 조직, 결합양상 및 화학조성 등에 의해 일반적인 투각섬석과 구분되며, 색, 경도 및 인성 등에 의해 등급과 가치가 달라진다. 본 연구에서는 춘천산 연옥을 대상으로 연옥의 물리적 특성(조직, 경도 및 인성) 등의 연구가 수행되었다. 춘천산 연옥은 구성광물인 투각섬석의 조직, 입도 및 공생광물(불순물)의 특성에 따라 세 가지 유형(유형 I, 유형 II, 유형 III)으로 구분된다. 유형 I은 치밀한 극미립의 초미정질(<5$\mu\textrm{m}$) 투감섬석의 치밀한 집합체로서 구성되며, 유형 II와 유형 III은 미정질(10~30$\mu\textrm{m}$) 및 세립 (>50$\mu\textrm{m}$)의 투각섬석 집합체로서 투휘석, 활석, 녹니석 및 사문석 등이 미량으로 함유된다.연옥을 구성하는 세 유형의 투각섬석의 화학조성은 Fe, Al 성분이 유형 III에서 가장 높은 함량(1.07~1.88wt.% FeO, 1.3~2.59wt.% Al2O3)을 나타내며, 유형 II(0.22~0.37wt.% FeO, 0.66~0.77wt.% Al2O3), 유형 I (0.20~0.24wt.% FeO, 0.05~0.12wt.% Al2O3)의 순으로 감소함을 보이고, SiO2 성분은 유형 I (59.13~59.67 wt.%), 유형 II(58.02~59.40wt.%), 유형 III (57.34~58.63 wt.%)순으로 함량이 낮아짐을 알 수 있다.연옥의 미경도(VHN=311~659)와 파괴인성치(2.38$\times$105~5.62$\times$105 dyne.cm-3/2)는 유형 I, 유형 II, 유형 III의 순으로 낮아진다. 이러한 결과는 조직 및 집합구조의 특성과 밀접한 관계를 갖고 있음을 반영한다.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.4
• /
• pp.421-426
• /
• 2010

The transesterification of rapeseed oil, soybean oil, and mixed fat were conducted at $65^{\circ}C$ with $Al_2O_3$-supported CaO, 0.8 wt% KOH, 1 wt% NaOH and mixed catalyst. The overall conversion(%) of rapeseed oil indicated to be 96% at the 12:1 molar ratio of methanol to oil, 8 wt% CaO and 2 wt% water. The pH ranges of biodiesel for mixed fat using four catalysts and for three fats using 8wt% CaO were 7.3-9.1, 7.3-7.5, respectively. The volumes of water needed to wash biodiesel from rapeseed oil using 0.8 wt% KOH and 8 wt% CaO were 15 mL and 3 mL.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.140-145
• /
• 2005

The desulfurization abilities using GC/microreactor have been examined for $CuO-Fe_2O_3$ sorbents with respect to calcination temperatures of 700, 900 and $1,100^{\circ}C$. CuO was used as a main active component, $Fe_2O_3$ was used as an additive one and 25 wt% $SiO_2$ was used as a support. The desulfurization reaction temperature was $500^{\circ}C$ and the regeneration reaction temperature was $700^{\circ}C$. From the XRD results, the $CuFeO_2$ compound has been observed for the fresh sorbent calcined at $1,100^{\circ}C$ and the $CuFeS_2$ compound for the reacted sorbent calcined at $1,100^{\circ}C$. By the BET results, however any significant differences among sorbents calcined at the three different temperatures of 700, 900 and $1,100^{\circ}C$ haven't been observed. Especially CFS1 (CuO : $Fe_2O_3$ : $SiO_2$=67.5 wt% : 7.5 wt% : 25 wt%) sorbent calcined at $1,100^{\circ}C$ maintained about 10 g sulfur/100 g sorbent for 100 cycles by the cyclic test.

• Fisheries and Aquatic Sciences
• /
• v.24 no.2
• /
• pp.99-107
• /
• 2021

Water temperature (WT) is a major environmental factor of metabolic rate in fish; it directly affects food intake, ammonia excretion, oxygen consumption (OC), growth, and survival. Thus, the purpose of this study was to investigate changes in the OC and the hematological response of olive flounder Paralichthys olivaceus because of WT changes. In Exp. I, WT was increased from 20℃ to 29℃ within 18 h and maintained at 29℃ for 96 h. Then, WT was decreased from 29℃ to 20℃ within 18 h and maintained at 20℃ for 24 h. In Exp. II, WT was decreased from 20℃ to 11℃ within 18 h and maintained at 11℃ for 96 h. Then, WT was increased from 11℃ to 20℃ within 18 h and maintained at 20℃ for 24 h. The Exp. III maintained that the Exp. I and II was consecutively. In Exp. I, the OC increased from 116.7 mg O₂ kg^-1 hr^-1 to 317.5 mg O₂ kg^-1 hr^-1 with increasing WT. In Exp. II, the OC decreased from 96.5 mg O₂ kg^-1 hr^-1 to 71.3 mg O₂ kg^-1 hr^-1 with decreasing WT. In Exp. III, OC tended to increase or decrease in inverse proportion to temperature. In Exp. I, cortisol, glucose, and aspartate aminotransferase (AST) values increased with increasing WT. In Exp. II, Cl^-, osmolality, AST, and alanine aminotransferase (ALT) values significantly changed during the experimental period: glucose values increased, whereas cortisol values decreased with decreasing WT. Exp. III was shown to be a more stressful environment to olive flounder than Exp. I and Exp. II. The results of our study will be useful for evaluating current aquaculture procedures of olive flounder and developing techniques to minimize stress in aquaculture farms.