• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.270-271
• /
• 2008

Antimony (6 wt%) doped tin oxide (ATO) films to improve conductivity were deposited on 7059 coming glass by RF magnetron sputtering method for application to transparent electrodes. The ATO film was deposited at a working pressure of 5 mTorr and RF power of 175 W. We investigated the effects of the post-annealing temperature on structural, electrical and optical properties of the ATO films. The films were annealed at temperatures ranging from $300^{\circ}C$ to $600^{\circ}C$ in step of $100^{\circ}C$ using RTA equipment in vacuum ambient. X-ray diffraction (XRD) measurements showed the ATO films to be crystallized with a strong (101) preferred orientation as the annealing temperature increased. Electrical resistivity decreased significantly with annealing temperatures up to $600^{\circ}C$. ATO film annealed at temperature of $600^{\circ}C$ showed the lowest resistivity of $5.6\times10^{-3}\Omega$-cm. Optical transmittance increased significantly with annealing temperatures up to $600^{\circ}C$. The highest transmittance was 90.8 % in the visible range from 400 to 800 nm.

• 대한의생명과학회지
• /
• 제19권3호
• /
• pp.266-269
• /
• 2013

Hox genes encode transcription factors important for anterior-posterior body patterning at early stages of embryonic development. However, the precise mechanisms by which signal pathways are stimulated to regulate Hox gene expression are not clear. In the previous study, protein kinase B alpha (Akt1) has been identified as a putative upstream regulator of Hox genes, and Akt1 has shown to regulate Gcn5, a prototypical histone acetyltransferase (HAT), in a negative way in mouse embryonic fibroblast (MEF) cells. Since the activity of HAT such as the CBP/p300, and PCAF (a Gcn5 homolog), was down-regulated by Akt through a phosphorylation at the Akt consensus substrate motif (RXRXXS/T), the amino acid sequence of Gcn5 protein was analyzed. Mouse Gcn5 contains an Akt consensus substrate motif as RQRSQS sequence while human Gcn5 does not have it. In order to see whether Akt1 directly binds to Gcn5, immunoprecipitation with anti-Akt1 antibody was carried out in wild-type (WT) mouse embryonic fibroblast (MEF) cells, and then western blot analysis was performed with anti-Akt1 and anti-Gcn5 antibodies. Gcn5 protein was detected in the Akt1 immunoprecipitated samples of MEFs. This result demonstrates that Akt1 directly binds to Gcn5, which might have contributed the down regulation of the 5' Hoxc gene expressions in wild type MEF cells.

• 한국해양바이오학회지
• /
• 제9권2호
• /
• pp.35-42
• /
• 2017

Hydrothermal liquefaction of lipid-extracted Tetraselmis sp. feedstock containing 80 wt.% water was conducted in a batch reactor at different temperatures (300, 325, and $350^{\circ}C$) and reaction times (5, 10, 20, 40, and 60 min). The biocrude yield, elemental composition and higher heating value obtained at various reaction conditions were used to predict the optimum conditions for maximizing energy recovery of biocrude with good quality. A maximum energy recovery of 67.6% was obtained at $325^{\circ}C$ and 40 min with a high energy density of 31.8 MJ/kg and lower contents of nitrogen and oxygen. Results showed that reaction conditions of $325^{\circ}C$, 40 min was most suitable for maximizing energy recovery while at the same time achieving improved quality of biocrude.

• 한국응용과학기술학회지
• /
• 제14권1호
• /
• pp.77-87
• /
• 1997

PFO(pyrolized fuel oil) and $C_{10}^{+}$ oil, which are the residual heavy oils form a NCC(naphtha cracking center), were heat-treated to produce the precursor-pitch for carbon materials. After PFO was initially distilled near $300^{\circ}C$ to separate the volatile matters recovering as high-quality fuel oil, the residuum of nonvolatile precursor-pitch was then thermally pyrolized in the temperature ranges from $350^{\circ}C$ to $450^{\circ}C$. Spinnable isotropic pitch with the softening point of $200^{\circ}C$ and the toluene insolubles of 36wt% was obtained at $365^{\circ}C$, and then was successfully spun through a spinneret(0.5mm diameter). After spinning, an isotropic carbon fiber of $25{\mu}m$ diameter was obtained via oxidation and craboniation procedures. Mesophase spherules began to be observed from the product pitch pyrolized at $400^{\circ}C$, and bulk mesophase with a flow texture was observed above $420^{\circ}C$. In the case of $C_{10}^{+}$ was the feed was polymerized in the presence $H_2SO_4$ at room temperature to increase the molecular weight and then heat-treated gradually up to $200{\sim}250^{\circ}C$. The products obtained with the softening point of $80{\sim}190^{\circ}C$ were carbonized at 500 and $1000^{\circ}C$ to examine the morphology.

• 센서학회지
• /
• 제18권4호
• /
• pp.263-268
• /
• 2009

With the increasing number of automobiles, the problem of air pollution from the exhaust gases of automobiles has become a critical issue. The principal gases that cause air pollution are nitrogen oxide or NO$_x$(NO and NO$_2$), and CO. Because NO$_x$ gases cause acid rain and global warming and produce ozone(O$_3$) that leads to serious metropolitan smog from photochemical reaction, they must be detected and reduced. Mixtures of WO$_3$ and $In_2O_3$(WO$_3$:$In_2O_3$=10:0, 7:3, 5:5, 3:7, and 0:10 in wt.%), which are NO$_x$ gas-sensing materials, were prepared, and thick-film gas sensors that included a heater and a temperature sensor were fabricated. Their sensitivity to NO$_x$ was measured at 250$\sim$400$^{\circ}C$ for NO$_x$ concentrations of 1$\sim$5 ppm. The $In_2O_3$ thick-film sensor showed excellent sensitivity($R_{gas}/R_{air}$=10.22) at 300$^{\circ}C$ to 5-ppm NO. The response time for 70 % saturated sensitivity was about 3 seconds, and the sensors exhibited very fast reactivity to NO$_x$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.277-277
• /
• 2011

Mo-Cu 합금은 고강도이고 우수한 열전도성 및 전기전도성를 가지는 특성이 있어 현재 방열소재, 반도체 부품, 자동차 부품 등 여러 응용분야에서 연구가 활발히 진행되고 있다. 본 연구에서는 서로 고용성이 없는 Mo-Cu 합금을 제조하기 위해서 Mo, Cu 분말을 PBM (Planetary Ball Milling) 방법을 이용하여 제조 하였으며, 제조된 분말은 SPS (Spark Plasma Sintering) 공정을 이용하여 소결체를 제조하였다. Mo-Cu의 조성 변화는 Cu의 함유량을 각각 5at%Cu, 10at%Cu, 20at%Cu로 조절하여 수행하였으며, PBM 의 공정 변수로 회전수(RPM), 볼과 분말의 비율, 분산제의 양, 볼밀 시간, 분위기 변화를 주어 최적조건을 얻기 위한 실험을 진행하였다. PBM 방법을 이용하여 제조한 분말은 PSA (Particle Size Analysis)에 의해 분말의 크기를 측정하고 EDS(Energy Disperse X-ray Spectrometer) 분석에 의해 조성을 확인하였으며, XRD (X-Ray Diffraction) 분석에 의해 Cu peak이 사라지는 조건을 PBM의 최적조건으로 잡고 실험을 진행하였다. 소결체를 고밀도화하기 위해 소결공정을 SPS 방식으로 하였으며 소결체의 경도, 내마모성, 마찰계수 일함수 등을 분석하기 위해 소결체의 크기를 직경 30 mm 및 두께 5 mm로 설계하였고, 소결 공정 변수로 소결온도를 각각 $900^{\circ}C$, $1000^{\circ}C$, $1100^{\circ}C$, 소결압력을 50MPa, 60MPa, 70MPa, 유지시간을 0분, 10분, 20분으로 차이를 주어, 소결체의 밀도차이와 물성차이를 분석하였다. 그 결과 PBM의 최적조건으로는 5at%Cu 에서는 10h, 10at%Cu, 20at%Cu 에서는 20h의 최적의 밀링 시간을 확인하였고, 다른 공정 변수의 최적조건으로는 회전수 300RPM, 10:1의 볼과 분말 비, 분산제 4wt%, Ar 분위기라는 조건을 얻을 수 있었다. 각각의 공정변수 변화에 따른 소결체 최적밀도 달성조건, 소결체 물성 및 전기적 특성 등의 상관관계에 관하여 보고한다.

• 자원환경지질
• /
• 제24권2호
• /
• pp.151-165
• /
• 1991

The Au-Ag deposits of the Euiseong area occurred in quartz veins which filled fissures in Cretaceous sedimentary and volcanic rocks. These ore veins can be classified in two types of deposits based on metallic mineral assemblages as follow: a pyrite type gold-silver deposit (Hoedong mine), characterized by Cu sulfides with Au-Ag alloy, and a Sb-rich silver deposit (Keumdongdo mine), characterized by base metal with Ag-bearing sulfosalts. Mineralogic and fluid inclusion evidences suggest that the ore minerals of these deposits was deposited from initial high temperatures (near $350^{\circ}C$) to later lower temperatures ($200^{\circ}C$) with moderate salinity fluids ranging from 5.8 to 3.8 eq. wt. % NaCl. The gold-silver mineralization of the Hoedong mine occurred at temperatures between 300 and $200^{\circ}C$ from fluids with log $f_{s_2}$ of -10 ~ -16 atm. The antimony - silver mineralization of the Keumdongdo mine were deposited at the higher temperatures (350 to $250^{\circ}C$) and $f_{S_2}$ (-10 ~ -13 atm) than gold mineralization of the Hoedong mine. The calculated log f02 of fluids at $250^{\circ}C$ in two deposits are -32 to -34 atm and -36.5 to -38.5 atm, respectively. Boiling evidences indicate that the ore mineralization of the Hoedong mine occurred at more shallow depth (0.5km) than that (1km) of the Keumdongdo mine. The above differences of depositional environments between two deposits caused the compositional changes of ore minerals such as electrum and sphalerite.

• 열처리공학회지
• /
• 제9권1호
• /
• pp.1-11
• /
• 1996

Mechanical alloying is an effective process to finely distribute inert dispersoids in an Al-TM(TM is a transition metal) system. It has been considered that high melting point aluminides are formed by precipitation from supersaturated Al(Ti) powder. This analysis is based on the fact that much higher content of TM than the solubioity can be dissolved in alpha aluminum during the high energy ball milling. Thus, decomposition behavior of Ti in the Al(Ti) was considered very important. But it is confirmed that the higher portion of Ti than Al(Ti) solid solution is existed as nano-sized Ti particles in the MA powders by high energy ball nilling from the XRD spectrum and TEM analysis in this study. Therefore, the role of undissolved TM particles affect the formation of aluminides should be suitably considered. In this study, we present experimental observation on the formation of $Al_3Ti$ fron mechanical alloyed Al-Ti alloys in the hyperperitectic region. This study showed that, in the mechanically alloyed Al-20wt%Ti specimen, intermediate phase of cubic $Al_3Ti$ and tetragonal $Al_{24}Ti_8$ formed at $300{\sim}400^{\circ}C$ and $400{\sim}500^{\circ}C$, respectively, before the MA state reaches to equilibrium at higher temperatures. The formation behavior of $Ll_2-Al_3Ti$ is interpreted by interdiffusion of Al and Ti in solid state based on the fact that large amount of nano-sized Ti particles exist in the milled powder. Present analysis indicated undissolved Ti particles of nanosize should have played an important role initiation the formation of $Al_3Ti$ phase during annealing.

• 대한한의학회지
• /
• 제24권3호
• /
• pp.1-10
• /
• 2003

Background : Asthma is a chronic inflammatory disorder under immunological influence. Gamichunggumgangwha-tang (CG, Jiaweiqingjinjianghuo-tang) and Gamiyukmigiwhang-tang (YM, Jiaweiliuweidihuang-tang) are herbal tonics for asthma from traditional herbal medicine. Objective : To evaluate the effect of CG and YM on immune cell & serum OA-specific IgE in broncho-alveolar lavage fluid (BALF) in a rat asthma model. Materials and Methods : Rats were sensitized with OA; at day I sensitized group and CG and YM groups were systemically immunized by subcutaneous injection of 1mg OA and 300mg of Al(OH)3 in a total volume of 2ml. At the same time, 1 ml of 0.9% saline containing $6{\times}10^9$ B. pertussis bacilli was injected by Lp. 14 days after the systemic immunization, rats received local immunization by inhaling 0.9% saline aerosol containing 2% (wt/vol) OA. A day after local immunization, BALF was collected from the rats. Rats were orally administered with each of CG and YM extract for 14 days since the day after local immunization. Lymphocyte, CD4＋ T cell and CD8＋ T cell counts, CD4＋/CD8＋ ratio in BALF, change of serum OA-specific IgE level, CD4＋ T cell and CD8＋ T cell percentages in the peripheral blood were measured and evaluated. Results : CG and YM showed an alleviating effect on asthmatic responses of rats. CG decreased total cell, lymphocyte, CD4＋ T cells in BALF, and serum OA-specific IgE level as compared with the control group. YM decreased lymphocytes as compared with the control group. CD4＋/CD8＋ ratio in BALF from the CG and YM groups and serum OA-specific IgE level from the YM group didn't show any significant variation from the control group. Conclusion : CG alleviated asthmatic hyperreactivity of the immune system through CD4＋ T cells and serum IgE. Further the study of this immune system modulating mechanism is expected.

• 한국분말재료학회지
• /
• 제25권4호
• /
• pp.322-326
• /
• 2018

The hydrogen reduction behavior of $MoO_3-CuO$ powder mixture for the synthesis of homogeneous Mo-20 wt% Cu composite powder is investigated. The reduction behavior of ball-milled powder mixture is analyzed by XRD and temperature programmed reduction method at various heating rates in Ar-10% $H_2$ atmosphere. The XRD analysis of the heat-treated powder at $300^{\circ}C$ shows Cu, $MoO_3$, and $Cu_2MoO_5$ phases. In contrast, the powder mixture heated at $400^{\circ}C$ is composed of Cu and $MoO_2$ phases. The hydrogen reduction kinetic is evaluated by the amount of peak shift with heating rates. The activation energies for the reduction, estimated by the slope of the Kissinger plot, are measured as 112.2 kJ/mol and 65.2 kJ/mol, depending on the reduction steps from CuO to Cu and from $MoO_3$ to $MoO_2$, respectively. The measured activation energy for the reduction of $MoO_3$ is explained by the effect of pre-reduced Cu particles. The powder mixture, hydrogen-reduced at $700^{\circ}C$, shows the dispersion of nano-sized Cu agglomerates on the surface of Mo powders.