• Title/Summary/Keyword: WRIST

Search Result 1,161, Processing Time 0.032 seconds

Electromyography Triggered Training System for Wrist Rehabilitation (근전도 트리거 손목 재활 훈련 시스템 개발)

  • Kim, Younghoon;Le, DuyKhoa;Chee, Youngjoon;Ahn, Kyoungkwan;Hwang, Changho
    • Journal of Biomedical Engineering Research
    • /
    • v.34 no.3
    • /
    • pp.148-155
    • /
    • 2013
  • This study is about the development of the wrist rehabilitation system for the patient who has limited capability of movement after stroke. Electromyography triggered training system (ETTS) can play the role between complete passive training and patient activating training system. Surface EMG was measured on pronator teres muscle and biceps brachii muscle for wrist pronation and supination. Our system detects whether the subject makes muscular effort for pronation or supination or nothing in every 50 ms. When the effort level exceeds the preset percentage of maximal voluntary contraction, the motor rotates according to the direction of the intention of the subject. EMG triggers the motor rotation for the wrist rehabilitation training until the preset angle. To evaluate its performance, the maximum voluntary contraction level was measured for 4 subjects at first. With the audio-visual instruction to rotate the wrist (pronation or supination) the subjects made effort to follow the instruction. After calculating root mean square (RMS) for 50 ms, the controller determines whether there was muscular effort to rotate while holding the motor. When there was an effort to rotate, the controller rotates the motor 0.8 degree. By comparing the RMS values from two channels of EMG, the controller determines the rotational direction. The onset delay is $0.76{\pm}0.24$ s and offset delay is $0.65{\pm}0.22$ s for pronation. For supination the onset delay is $1.24{\pm}0.41$ s and offset delay is $0.77{\pm}0.22$ s. The system responded fast enough to be used for rehabilitation training. The controller perceived the direction of rotation 100% correctly for the pronation and 97.5% correctly for supination. ETTS was developed and the fundamental functions were validated for normal subjects. The clinical validation should be done with patients for real world application. With ETTS, the subjects can train voluntarily over the limitation of the range of motion which increases the effectiveness of the rehabilitation training.

USEFULNESS OF CERVICAL VERTEBRAE MATURATION STAGE AS A MANDIBULAR MATURATION INDICATOR (하악골 성장 지표로서 경추골 성숙도의 유용성)

  • Choi, Bong-Sun;Choi, Nam-Ki;Kim, Sun-Mi;Yang, Kyu-Ho;Chung, Sung-Su
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.34 no.4
    • /
    • pp.551-559
    • /
    • 2007
  • This study was to investigate if cervical vertebrae maturation stages are as useful as hand-wrist maturation stages in evaluating the mandibular growth. The subject consisted of 292 girls aged from 8 to 16 years with normal occlusion. They were classified according to diagnosis by using studycast, lateral cephalogram, and handwrist X-ray film. The results were as follow: 1. Cervical vertebrae and hand-wrist maturation stages increased with age. 2. All mandibular measurements (Ar-Go, Go-Me, N-Go, S-Gn, N-Me) increased linearly with cervical vertebrae maturation stages. 3. Ar-Go, Go-Me, N-Go, S-Gn increased linearly with hand-wrist maturation stages. 4. Ar-Go, Go-Me, N-Go, S-Gn increased relatively rapidly between cervical vertebrae maturation stages 3 and 4. Go-Me and S-Gn increased relatively rapidly between hand-wrist maturation stages 6 and 7. 5. Ar-Go, Go-Me, N-Go, S-Gn, N-Me had high correlations with cervical vertebrae maturation stages as well as hand-wrist maturation stages. These results suggest that cervical vertebrae maturation stages are reliable on evaluating the mandibular growth.

  • PDF

EVALUATION OF THE SKELETAL MATURITY USING THE CERVICAL VERTEBRAE AND HAND-WRIST RADIOGRAPHS (경추골과 수완부골 방사선 사진을 이용한 골성숙도 평가)

  • Kim, Kyung-Ho;Sung, Sang-Jin;Park, So-Youn
    • The korean journal of orthodontics
    • /
    • v.28 no.2 s.67
    • /
    • pp.285-295
    • /
    • 1998
  • In clinical orthodontics, it is significant to understand the stage of growth in a growing patient. In order to assess the skeletal maturity of the patients, the hand-wrist radiograph and the cervical vertebrae (Cervical Vertebrae Maturation Indicators : CVMI) was evaluated from the lateral cephalograph and the skeletal maturity determined from the hand-wrist X-ray (Skeletal Maurity Indicators : SMI) taken on the same day in the same patients, and its interrelationship examined to come up with the following results: 1. The skeletal maturity evaluated from the hand-wrist radiograph and the maturation of the cervical vertebrae from the lateral cephalograph showed a significant interrelationship with each other. 2. In the evaluation of the skeletal maturity using the SMI and CVMI, the CVMI 1 showed a siginificant correlation with SMI 1, 2, the CVMI 2 with SMI 3, 4, CVMI 3 with SMI 6, 7, CVMI 4 with SMI 7, 8, CVMI 5 with 9, 10 and CVMI 6 with SMI 11. 3. When the morphological changes in the 2nd and 3rd cervical vertebrae were separately observed, it was seldom that the concavity appeared in the lower border of the 2nd cervical vertebra and at the same time not appear in the 3rd cervical vertebra (CVMI 2 : 10.38%, CVMI 3 : 6.56%) 4. In each of the skeletal maturation stage evaluated from the hand-wrist and the cervical vertebra, the average age and its standard deviation in male and female patients appeared to have large differences among individuals. Skeletal maturation seemed to appear earlier for the girls than for the boys, and its termination 24 months faster for girls.

  • PDF

Effects of Touchpad &Buttons Positions in a Laptop Computer on EMG Amplitude and Median Frequency of Muscles Relating to Wrist and Shoulder (랩탑 컴퓨터 터치패드와 클릭버튼 위치에 따른 손목과 어깨 부위 근육의 EMG 진폭 및 중앙 주파수 변화)

  • Han, Seung Jo;Kim, Sun-Uk;Koo, Kyo Chan
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.14 no.3
    • /
    • pp.1258-1265
    • /
    • 2013
  • The objective of this study is to investigate the association between touchpad &buttons locations in a laptop computer and EMG amplitude and median frequency in muscles related with wrist and shoulder. Based on previous studies it was shown how abductions in wrist and shoulder could cause musculoskeletal disorders in those body parts, on which research hypotheses were established. Touchpad &buttons positions consisted of bottom center(BC), bottom center with $45^{\circ}$ rotation counterclockwise(BCR), and bottom right(BR). 10 subjects performed the task that required only touchpad &buttons usage with their preferred hand and EMG amplitude and median frequency data were recorded during 5min and analyzed afterwards. Upper trapezius and flexor carpi ulnaris were selected as target muscles. The results showed that in flexor carpi ulnaris BC resulted in greater amplitude and less median frequency than BCR and BR, but there was no significant difference between BCR and BR. In upper trapezius BC and BCR induced higher amplitude and lower median frequency than BR, but the significant difference between BC and BCR was not observed. Those phenomena occurred since BC gave rise to both wrist and shoulder abduction, BCR caused only shoulder one, and BR did not lead to abductions in both wrist and shoulder.

The Development of Stretch Sensors for Measuring the Wrist Movements for People Using Fishing Lures (루어낚시 참여자의 손목 움직임 측정을 위한 스트레치 센서 개발)

  • Choi, Yoon-Seung;Park, Jin-hee;Kim, Joo-yong
    • Science of Emotion and Sensibility
    • /
    • v.25 no.3
    • /
    • pp.77-90
    • /
    • 2022
  • This study seeks to develop a stretch sensor for measuring the wrist movements of people using fishing lures. In order to confirm wrist movement, a stretch sensor was attached to the wrist band, and measurements of the dorsiflexion, plantar flexion, and fishing landing motion were measured using a scale to gauge factor, tensile strength, and elongation recovery rate. A conductive sensor using CNT dispersion was developed and applied to the E-band under the same conditions. A total of 15 sensors of the same size and five types of impregnation once, twice, and three times each were used to measure the gauge factor using UTM. The sensor that was impregnated twice had the best gauge rate, and the prototypes were manufactured with three sensors with high gauge rates and tensile strength. The results of the operation test conducted by connecting to the Arduino showed that Sample 1, which had the highest tensile strength and gauge factor, had a stable graph wavelength in three operations. Samples 2 and 3 showed stable wavelengths in the dorsiflexion and the plantar flexion; however, signal noise appeared in the fishing landing motion. This showed stable wavelengths in the two motions, but the wavelengths of the graphs differ depending on the tensile strength and gauge factor in the fishing landing motion. As a result, it was possible to identify the conditions necessary for manufacturing a stretch sensor for measuring wrist movement. This study will contribute to the development of smart wearable products for lure fishing.

누적외상병 예방을 위한 Drilling 작업 빈도에 관한 연구

  • 김철홍
    • Proceedings of the ESK Conference
    • /
    • 1994.04a
    • /
    • pp.41-48
    • /
    • 1994
  • A laboratory experiment was conducted to examine the effect of varying working conditions on drilling frequendcy for females. Results of ANOVA showed that angle of wrist flexion and force had significant effects on drilling frequency. As angle ofwrist flexion and force increased drilling frequency decreased significantly. A set of 4 regression models were developed to predict maximum acceptable frequency (MAF) for drilling as a function of wrist flexion angle, force, and various physiological measures with could be applied in industrial situations

  • PDF

Analysis of Maximum Acceptable Frequencies for Upper Extremity Motions with Forces in a Seated Position (앉은 자세에서 힘 수준에 따른 상지관절 동작별 최대 수용 반복 빈도수 분석)

  • Kwon, O-Chae;You, Hee-Cheon;Jung, Ki-Hyo
    • Journal of the Ergonomics Society of Korea
    • /
    • v.24 no.2
    • /
    • pp.65-70
    • /
    • 2005
  • Evaluation of repetitiveness for upper extremity intensive tasks is essential to determine the level of risk for upper extremity musculoskeletal disorders at the workplace. However, experimental data available to establish the acceptable levels of repetitiveness for various postures and forces is lacking. The present study examined the maximum acceptable frequencies(MAFs; motions/min.) of shoulder, elbow, wrist, and index finger motions at different forces(1kgf and 4kgf for shoulder, elbow, and wrist; 0.25kgf and 1 kgf for index finger) in sitting. Seventeen right-handed males in 20s without having any history musculoskeletal disorders participated in the MAF experiment. The participants determined their MAFs for the upper extremity motions by using the self-adjustment method and their work pulse(increase in heart rate; beats/min.) and rating of perceived exertion(RPE) were measured when working at MAF. The MAFs of elbow, wrist, and index finger motions for each force level were about 2, 3, and 6 times the corresponding MAF(9 at the high force and 24 at the low force) of shoulder motion and the MAFs at the low force increased about 2 times those at the high force. The work pulses of elbow, wrist, and index finger motions for each force level were 70%, 50%, and 30% of the corresponding work pulse(17 at the high force and 12 at the low force) of shoulder motion and the work pulses at the low force were about 70 % of those at the high force. Lastly, the RPEs of the upper extremity regions were about level 3(moderate) or below.

Effect of Diamond Taping Applied to the Elbow Joint on Wrist Extensor Muscle Activity in Healthy Subjects (팔꿉관절 부위에 적용한 다이아몬드 테이핑이 정상인의 파악력 수준별 손목 폄근의 근활성도에 미치는 영향)

  • Huang, Tian-zong;Kim, Suhn-yeop
    • Physical Therapy Korea
    • /
    • v.27 no.2
    • /
    • pp.118-125
    • /
    • 2020
  • Background: Lateral epicondylitis (LE) is the most common chronic musculoskeletal pain condition of the upper extremities. LE is often related to forceful grip activities that require isometric contraction of the wrist extensors. A previous study evaluated the effect of the diamond taping technique on grip strength and pain; however, there has been no report on the change in the electromyography (EMG) findings of wrist extensors. Objects: The aim of this study was to investigate the effect of diamond taping technique, using a rigid tape, on the EMG activities of the extensor carpi radialis (ECR) during grip activities. Methods: Twenty-four healthy subjects (mean age = 21.50 ± 2.76 years) volunteered to participate in this study. The subjects were instructed to perform forceful grip activities with and without diamond-type taping on the origin area of the ECR. Grip strength tests were performed at 100%, 75%, 50%, and 25% for maximal isometric contraction force. EMG data were collected from the ECR. Repeated measure analysis of variance was used to analyze the effect of grip force and taping (with and without). Statistical significance levels were set at α = 0.05. Comparison of the results with and without taping at different grip force were analyzed using independent t-test. Statistical significance levels were set at α = 0.01. Results: Statistically significant association was observed between the taping application and forceful grip activity as revealed by the EMG data of the ECR (p < 0.05). EMG of the ECR significantly reduced for all muscle strength levels (p < 0.01) after taping. Conclusion: This study shows an impressive effect of the diamond taping technique, using rigid tape, on wrist extensors during grip activities. Decreasing muscle activity via this taping approach could be utilized to enhance pain-free grip force and reduce pain in patients with LE. Our study suggested that this taping technique could be considered as an effective management strategy of LE.