• Journal of the Korean Solar Energy Society
• /
• v.34 no.1
• /
• pp.64-71
• /
• 2014

This study is to perform economic analysis of a PVT-GSHP (Photovoltaic Thermal-Ground Source Heat Pump) system compared to the conventional system which consists of a boiler and a chiller. This research has simulated, developed and analyzed four systems for application in a residential and an office building which was based on the hourly EPI (Energy Performance Index, $kWh/m^2yr$). Case 1 includes a boiler and a chiller to meet heating and cooling demands for a house. Case 2 is the same conventional system as Case 1 for a office. Case 3 is simple summation of Case 1 and 2. And Case 4 is utilizing a PVT-GSHP to meet the combined loads of the house and office. The economic evaluation study was based on IEA ECBCS Annex 54 subtasks C economic assessment methods. This study indicated that PVT-GSHP system can save a building's energy up to 53.9%. Also the SPB (Simple Payback) of the PVT-GSHP system with 0%, 50% initial incentive was 14.5, 6.7 year respectively.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.5
• /
• pp.99-104
• /
• 2011

It has to take quantitative energy usage of high school education facilities in nations to set goals of their energy reduction. Therefore, The purpose of this study is to present various analysis result of energy consumption that is a statistic alanalysis of high school education facilities in Korea to set the goal of energy saving. This study has enforced analysis and has provided used energy for the year 2008 and general information from 2022 high school education facilities in 16 cities in South Korea by the relevant agency. Used energy sources in high school education facilities are electricity, gas for heating, oil, coal, water, and this study has changed the various used energy sources as unit 'kWh' only for comparison and analysis them.

• The Korean Journal of Zoology
• /
• v.35 no.2
• /
• pp.161-172
• /
• 1992

In the short-term treahent of 12-0-tetradecanoylphorbol-13-acetate (TPA) or platelet-derived growth factor (PDGF), the'Wh and PDGF induced the Protein Kinase C (PKC) activation and migration from the cytoplasm to the peripheral nulcear membrane. And the activated PKC which was directly or indirectly stimulated by TPA or PDGF Phosphorylated many kinds of PKC's targeting proteins and induces various biological responses. Especially, the cytoplasmic PKC was phosphorylated within 1 hr and 10 min by TPA-and PDGF-treahent respectivelv. In the long-term treatment of TPA or PDGF, both of them induced the down-regulation and translocation of PKC in the mvoblasts. The down-regulation of PKC isozyrnes, the pattern of PKC I and ll was similar to the PKC 111 isozpnes in the cytoplasm. But in the nucleolus, the TPA did not induce and down-regulation or the inhibition of the immunoreactivity of PKC III antibody. This investigation indicates that each isozvmes of PKC mal be performed the different effects to the down-regulation of the cytoplasm or nucleolus. And douvn-regulated myoblasts contained low immunoreactivity of PKC antibodies.

• Transactions of Materials Processing
• /
• v.9 no.1
• /
• pp.72-79
• /
• 2000

Dynamic recrystallization (DRX), which may occur during hot deformation, is important for the microsturctural evolution of 304 stainless steel. Especially, the current interest in modelling hot rolling demands quantitative relationships among the thermomechanical process variables, such as strain, temperature, strain rate, and etc. Thus, this paper individually presents the relationships for flow stress and volume fraction of DRX as a function of processing variables using torsion tests. The hot torsion tests of 304 stainless steel were performed at the temperature range of 900~110$0^{\circ}C$ and the strain rate range of 5x10-2~5s-1 to study the high temperature softening behavior. For the exact prediction of flow stress, the equation was divided into two regions, the work hardening (WH) and dynamic recovery (DRV) region and the DRX region. Especially, The flow stress of DRX region could be expressed by using the volume fraction of DRX (XDRX). Since XDRX was consisted of the critical strain($\varepsilon$c) for initiation of dynamic recrystallization (DRX) and the strain for maximum softening rate ($\varepsilon$*), that were related with the evolution of microstructure. The calculated results predicted the flow stress and the microstructure of the alloy at any deformation conditions well.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.2
• /
• pp.101-105
• /
• 2018

Shortage of electric power occurs frequently along with increased electric power demand. ESS is a precaution to solve this issue. Household ESS has a capacity of approximately 3 kW/7 kWh. Household ESS batteries are typically designed with nominal voltages between 40 and 50 V. To connect household ESS with a 220 V AC system, low battery voltages in power conditioning system (PCS) should be boosted. To boost low battery voltage and match it with AC grid voltage, the use of a transformer for a commercial frequency can be considered. To attenuate switching harmonics of the household single-phase ESS-PCS, LC filter can be installed in two positions: on the primary side or on the secondary side of a transformer. A method has been used generally in single-phase inverters for the ESS-PCS. In another method, however, the output efficiency of the ESS-PCS may be decreased. Parasitic components of the transformer can affect voltage losses, when the square wave with the switching frequency in the ESS-PCS is passed through the transformer windings. In this work, the characteristics of the transformer according to the position of an LC filter are investigated for household single-phase ESS-PCS.

• Journal of the Korean Society for information Management
• /
• v.10 no.2
• /
• pp.111.1-111.1
• /
• 1993

There are two types of bibliographic database, the one IS bibliographic database with creativlty. theother is bibliographic database without creativlty, The purpose of this paper is to investigate the problemsof bibliographic database with creatlvity by giving consideration of copyright law and the problems ofbihographic database w~thout creat~vity by sui genem system. Thus thls paper provided the methods thatresolve the problems of the current copyright law in order to protect all types of database being producedby way of the cooperation between the libraries and the information service centers. Secondly, this paperprovlded the legal devlces to protect bibliographic database produced by the libraries wh~ch cannot beprotected due to the lack of the creatlvity in the selection or arrangement of the material.

• Journal of the Korean Society for information Management
• /
• v.10 no.2
• /
• pp.3-22
• /
• 1993

In recent years various document ranking methods such as Relevance. R-Distance and K-Distance have been developed wh~ch can be used in thesaurus-based boolean retrieval systems. They give high quality document rankings in many cases by using term dependence lnformatlon from a thesaurus. However, they suffer from several problems resulting from inefficient and Ineffective evaluation of boolean operators AND. OR and NOT. In this paper we propose new thesaurus-based document ranking methods called KB-FSM and KB-EBM by exploitmg the enhanced fuzzy set model and the extended boolean model. The proposed methods overcome the problems of the previous methods and use term dependencies from a thesaurs effectively. We also show through performance comparison that KB-FSM and KBEBM provide higher retrieval effectiveness than Relevance. R-D~stance and K-Distance.

• Journal of the Korean Society for information Management
• /
• v.10 no.2
• /
• pp.23-41
• /
• 1993

L~brary and ~nformat~on sclence has been critic~zed for its dearth of conceptually framed, creative research which has been narrowly faused, fragmented. and desgned to solve s~tuational problems. Durmg recent years. a crit~cal concern of scholars in the l~brary and information proiessions has been a need for creative research. Research is the critical element for developing a theoret~cal base in wh~ch to enhance prxtlce of the profess~on and to gu~de ~ t s future development. The purpose of thls paper are to ( 1 1 delineate various levels of theory with implications for research methods. and (2) analyze research methods and contents of prevlous research publ~shtd In Korea durmg last two decades. and ( 3 ) purpose several d~rections toward theory building in vlew of both theoretical and operat~onal aspects.

• Journal of the Korean Society for information Management
• /
• v.10 no.2
• /
• pp.111-143
• /
• 1993

There are two types of bibliographic database, the one IS bibliographic database with creativlty. the other is bibliographic database without creativlty, The purpose of this paper is to investigate the problems of bibliographic database with creatlvity by giving consideration of copyright law and the problems of bihographic database w~thout creat~vity by sui genem system. Thus thls paper provided the methods that resolve the problems of the current copyright law in order to protect all types of database being produced by way of the cooperation between the libraries and the information service centers. Secondly, this paper provlded the legal devlces to protect bibliographic database produced by the libraries wh~ch cannot be protected due to the lack of the creatlvity in the selection or arrangement of the material.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.11
• /
• pp.760-766
• /
• 2010

Excessive heat occurs during semiconductor manufacturing process. Thus, precise control of temperature is required to maintain constant chamber-temperature and also wafer-temperature in the chamber. Compared to an industrial chiller, semiconductor chiller's power consumption is very high due to its continuous operation for a year. Considering the high power consumption, it is necessary to develop an energy efficient chiller by optimizing operation control. Therefore, in this study, a semiconductor chiller is experimentally investigated to suggest energy-saving direction by conducting load change, temperature rise and fall and control precision experiments. The experimental study shows the cooling capacity of dual-channel chiller rises over 30% comparing to the conventional chiller. The time and power consumption in the temperature rising experiment are 43 minutes and 8.4 kWh, respectively. The control precision is the same as ${\pm}1^{\circ}C$ at $0^{\circ}C$ in any cases. However, it appears that the dual channel's control precision improves to ${\pm}0.5^{\circ}C$ when the setting temperature is over $30^{\circ}C$.