• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.2
• /
• pp.195-201
• /
• 2013

A lab-scale ensiling study was carried out to investigate the fermentation quality of water hyacinth (WH) supplemented with molasses, rice bran, as an absorbent, and an inoculant in the form of fermented vegetable juice and their combinations. After wilting the water hyacinths for 7 h to a dry matter (DM) content of 240 to 250 g/kg, the following treatments were applied: i) Control (C), WH only; ii) WH with sugarcane molasses at 40 g/kg WH (CM); iii) WH inoculated with fermented vegetable juice at 10 ml/kg WH (CI); iv) CM and CI (CMI) combined; v) WH with 150 g rice bran/kg WH (CA); vi) CA and CI combined (CAI); vii) CA and CM combined (CAM); and viii) CA, CM and CI combined (CAMI). After application of additives, the differently treated forages were mixed and ensiled in triplicates in 1,500-ml polyethylene jars. After ensiling for 3 d, pH values in all treatments, except C and CI, had decreased to approximately 4.0 and remained low till 14 d. After 56 d, pH had increased between 0.4 to 0.9 pH-units compared to those at 14 d. The ammonia nitrogen ($NH_3$-N) concentration ranged from an acceptable level in treatment CM (8 g/kg N) to a high $NH_3$-N value in treatment CMI (16 g/kg N). Lactic acid formation was higher in CI than in all other treatments. Butyric acid contents, which indicate badly fermented silages, were low in all silages (<2 g/kg DM). There were two-way interactions (p-values from <0.001 to 0.045) for almost all fermentation end-products and pH, except for the molasses${\times}$inoculant interaction on $NH_3$-N (p = 0.26). Significant 3-way interactions were found on all observed variables except for weight losses of silages. It is concluded that conserving wilted WH as silage for ruminants may be improved by the addition of molasses or rice bran.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.7 no.1
• /
• pp.45-50
• /
• 2011

Hybrid desiccant cooling system(HDCS) consists of desiccant rotor, regenerative evaporative cooler, heat pump and district heating hot water coil. In this study, TRNSYS and EES, dynamic and steady simulation programs were used for studying hybrid desiccant cooling system which is applied to an apartment house from June to August. The results show that power consumption of the hybrid desiccant cooling system is 70 kWh in June, 199 kWh in July and 241 kWh in August. Sensible and latent heats removed by the hybrid desiccant cooling system are 300 kWh, 301 kWh in June, 610 kWh, 858 kWh in July and 719 kWh, 1010 kWh in August. COP of the hybrid desiccant cooling system is 8.6 in June, 7.4 in July and 7.2 in August. COP of the hybrid desiccant cooling system decreases when latent heat load increases. Operation time of the system is 70 hours in June, 190 hours in July and 229 hours in August. Since the cooling load is largest in August, the operation time of August is longest for maintaining the indoor temperature at $26^{\circ}C$. Due to the characteristics of hybrid desiccant cooling system for efficiently handling both sensible and latent loads, this system can handle sensible and latent heat loads efficiently in summer.

• Environmental and Resource Economics Review
• /
• v.31 no.4
• /
• pp.531-559
• /
• 2022

It is necessary to study the need for introduction of nuclear energy tax in Korea to internalize the externality cost of nuclear power and to make more balanced taxation system considering LNG and coal power. This study adopts choice experiment method to estimate the willingness to pay (WTP) for possible new tax on nuclear power. The finding is that the tax on nuclear fuel is more preferable to other tax base with KRW2.19/kWh of WTP, compared to KRW1.46/kWh for nuclear waste. The WTP for using the tax revenue to facilitate economic activity is KRW6.39/kWh compared to KRW6.12/kWh of WTP for funding climate change investment. The finding suggests that the design of nuclear power taxation needs to focus more on the use of tax revenue than on the choice of tax base.

• Korean Journal of Clinical Pharmacy
• /
• v.8 no.2
• /
• pp.143-146
• /
• 1998

Acetaminophen (APAP) suppositories with active ingredients, i.e., polyethylene glycol (PEG), Witepsol H-15 (WH), were prepared for hospital use and investigated on their drug release characteristics and pharmacokinetics. WH was employed as oil-soluble base with an aim of reducing fragility and mucosa irritancy that are common drawbacks found in PEG suppositories. Also hollow type suppository was tried as compared with conventional type suppository. Drug release tests revealed that in most formulations, more than $80\%$ of loaded APAP were released within 20 minutes, except for APAP-WH hollow type suppositories. Significant differences in the plasma concentration profile were observed among four type suppositories. $T_{max}$ of APAP-PEG and APAP-WH suppositories were 90 and 60 minutes, respectively, in hollow types. APAP-WH hollow type suppositories demonstrated fast absorption rates of APAP as compared with those of APAP-PEG suppositories. No burst effect was observed from APAP-WH suppository in contrast to APAP conventional type suppository, whereas AUCs of all the suppositories were similar. APAP-WH hollow type suppository may be an useful dosage form for hospital use.

• Progress in Superconductivity
• /
• v.14 no.1
• /
• pp.60-65
• /
• 2012

A superconductor flywheel energy storage system (SFES) is an electro-mechanical battery which transforms electrical energy into mechanical energy for storage, and vice versa. A 35 kWh class SFES module was designed and constructed as part of a 100kWh/1MW class SFES composed of three 35 kWh class SFES modules. The 35 kWh class SFES is composed of a main frame, superconductor bearings, a composite flywheel, a motor/generator, electro-magnetic bearings, and a permanent magnet bearing. The high energy density composite flywheel is levitated by the permanent magnet bearing and superconductor bearings, while being spun by the motor/generator, and the electro-magnetic bearings are activated while passing through the critical speeds. Each of the main components was designed to provide maximum performance within a space-limited compact frame. The 35 kWh class SFES is designed to store 35 kWh, with a 350 kW charge/discharge capacity, in the 8,000 ~ 12,000 rpm operational speed range.

• Language and Information
• /
• v.18 no.2
• /
• pp.59-79
• /
• 2014

This paper aims at exploring the processing mechanism of filler-gap dependency resolution and feature checking in Korean wh-constructions. Based on their findings on Japanese sentence processing, Aoshima et al. (2004) have argued that the parser posits a gap in the embedded clause in head-final languages, unlike in head-initial languages, where the parser posits a gap in the matrix clause. In order to verify their findings in the Korean context, and to further explore the mechanisms involved in processing Korean wh-constructions, the present study replicated the study done by Aoshima et al., with some modifications of problematic areas in their original design. Sixty-four Korean native speakers were presented Korean sentences containing a wh-phrase in four conditions, with word order and complementizer type as the two main factors. The participants read sentences segment-by-segment, and the reading times at each segment were measured. The reading time analysis showed that there was no such slowdown at the embedded verb in the scrambled conditions as observed in Aoshima et al. Instead, there was a clear indication of the wh-feature checking process in terms of a major slowdown at the relevant region.

• Phonetics and Speech Sciences
• /
• v.12 no.3
• /
• pp.41-53
• /
• 2020

A wh-phrase in an embedded sentence may have either an embedded or a matrix scope. Interpretation of a wh-phrase with a matrix scope has tended to be syntactically unacceptable unless the sentence reads with a wh-intonation. Previous studies have found two differences in prosodic characteristics between sentences with matrix and embedded scopes. Firstly, peak F0s in wh-phrases produced with an F0 compression wh-intonation are higher than those in indirect questions, and peak F0s in matrix verbs are lower than those in sentences with embedded scope. Secondly, a substantial F0 drop is found at the end of embedded sentences in indirect questions, whereas no F0 reduction at the same point is noticed in sentences with a matrix scope produced with a high plateau wh-intonation. However, these characteristics were not found in our experiment. This showed that a more compelling difference exists in the values obtained from subtraction between the peak F0s of each word (or a word plus an ending or case marker) and the F0s at the end of the word. Specifically, the gap between the peak F0 in a word composed with an embedded verb and the F0 at the end of the word, which is a complementizer in Korean, is large in embedded wh-scope sentences and low in matrix wh-scope sentences.

• Journal of Internet of Things and Convergence
• /
• v.7 no.3
• /
• pp.9-14
• /
• 2021

This paper discovers the energy loss factors through the insulation diagnosis of houses or buildings, and proposes directions for energy efficiency improvement. The energy efficiency factor of a building consists of insulation diagnosis, thermal bridge diagnosis, window diagnosis, airtight diagnosis, and equipment diagnosis. Among the residents and facilities in the energy welfare blind spot, an energy efficiency diagnosis was conducted for one senior citizen building located in Naju-si, Jeollanam-do, and energy efficiency diagnosis was conducted after insulation was installed. Energy measurement, diagnosis and analysis were performed using the IoT-based integrated wired/wireless energy diagnosis platform, Energy Finder. As a result of comparison, an overall energy saving rate of 16.38% was achieved. Annual heating energy consumption per unit area decreased from 333.51kWh before construction to 277.35kWh after construction, and annual cooling energy consumption per unit area decreased from 5.51kWh before construction to 5.22kWh after construction. The annual primary energy consumption per unit area decreased from 464.52kWh before construction to 403.69kWh after construction, and the annual energy cost was reduced from 3,063,307.14 won before construction to 2,641,072.49 won after construction. The additional improvement work is needed on the standards affecting energy efficiency other than insulation.

• Language and Information
• /
• v.8 no.2
• /
• pp.93-110
• /
• 2004

This paper discloses a striking similarity between Korean/Japanese wh-NPs and Italian QPs: both categories are disallowed from LD-movement out of weak islands. This leads us to a substantial claim that wh-phrases in the former languages possibly belong to a non-D-linked category, parallel to the Italian QPs. This claim is also supported by semantic evidence: that is, in-situ wh-NPs in these languages lack covert partitivity (Kyungnam University)

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.11
• /
• pp.605-611
• /
• 2017

The purpose of this study is to calculate the energy consumption rate based on data regarding energy use in office buildings, and to confirm the general characteristics of energy consumption. The energy consumption rate of the building is calculated by dividing the energy consumption by the floor area. The energy consumption rate of small-sized office buildings was calculated as $101.48{\sim}201.55kWh/m^2{\cdot}year$ and in the case of medium-sized buildings, the range was $92.77{\sim}177.89kWh/m^2{\cdot}year$. In the case of small buildings, it was found that the energy consumption was $73.24kWh/m^2{\cdot}year$ in electronic device, $34.31kWh/m^2{\cdot}year$ in hot water supply, and $18.37kWh/m^2{\cdot}year$ in heating. In the case of medium-sized buildings, electronic devices was $73.08kWh/m^2{\cdot}year$, lighting was $18.35kWh/m^2{\cdot}year$ and heating, $15.37kWh/m^2{\cdot}year$. In all of the study buildings, the peak heating energy use was observed from 8:00 a.m. to 10:00 a.m during the winter, and the peak power management was required. Energy use at and around the midnight hour is confirmed to be 40~60% of weekly working hours, so it is necessary to manage power use at night time as well as during the day. In order to improve the accuracy of future studies, it is necessary to make efforts to secure the data with standardized energy measuring units for the various type of buildings.