• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04d
• /
• pp.608-610
• /
• 2003

Ethernet PON(Passive Optical Network)에서 핵심 기술 중의 하나인 MAC(Media Access Control) 프로토콜은 ONU(Optical Network틴nit)들이 상향으로 트래픽을 전송할 때 공유되어 있는 링크상의 충돌을 방지하고, 효율적인 대역폭을 할당하기 위한 스케줄링 알고리즘을 포함하고 있다. 본 논문에서는 차세대 가입자 망인 Ethernet PON에서 상향으로의 대역폭 부족을 개선하기 위하여, n개의 파장을 사용한 가변 슬롯 할당 TDMA(Time Division Multiple Access) 방식의 MAC 프로토콜을 제안한다. 이를 검증하기 위하여 OPNET 시뮬레이션 도구를 이용해 Ethernet PON 모델을 설계하고 시뮬레이션 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10A
• /
• pp.912-921
• /
• 2005

Optical burst switching(OBS) is a promising solution for building terabit optical routers and realizing If over WDM. Channel scheduling Algorithm for reduce contention is one of the major challenges in OBS. We address the issue of how to provide basic burst channel scheduling in optical burst switched WDM networks with fiber delay lines(FDLs). In OBS networks the control and payload components or a burst are sent separately with a time gap. If CHP arrives to burst switch node, because using scheduling algorithm for data burst, reservation resources such as wavelength and transmit data burst without O/E/O conversion, because contention and void between burst are happened at channel scheduling process for data burst that happened the link utilization and bust drop probability Existent proposed methods are become much research to solve these problems. Propose channel scheduling algorithm that use Release Time of bust to emphasize clearance between data and data dissipation that is happened in data assignment in this treatise and maximize bust drop probability and the resources use rate (RTUC : Release Time Unscheduled Channel). As simulation results, Confirmed that is more superior in terms of data drop and link utilization than scheduling algorithm that is proposed existing. As simulation results, confirmed improved performance than scheduling algorithm that is proposed existing in terms of survival of burst, efficiency resource and delay. However, In case load were less, degradation confirmed than existent scheduling algorithm relatively, and confirmed that is superior in data drop aspect in case of load increased.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.117-120
• /
• 2003

PON (Passive Optical Network) is an emerging local subscriber access architecture that provides more bandwidth and services to subscriber than DSL (Digital Subscriber Line and HFC (Hybrid-Fiber Coaxial) network. A PON is a point-to-multipoint optical network with no active elements in the signals' path from source to destination. Advantages of using PON for a subscriber access network include large coverage area, reduced fiber deployment, multicast and broadcast capabilities, reduced cost of maintenance (due to devices being passive), and ease of upgrades to higher bit rate or additional wavelengths. PON uses WDM (Wavelength Division Multiplexing) technique that transmits the downstream and upstream data at each different wavelength. For transmitting the CATV (Community Antenna television) service through PON network, we give out additional wavelength. This study shows the available TPS (Triple play service) architecture using CATV overlay EPON (Ethernet PON) architecture and analyzes the effects of EPON-based CATV transmission by measuring the power loss fur each wavelength and the power range of the available analog wavelength and RF.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6A
• /
• pp.511-518
• /
• 2007

One of the major issues that has to be carefully considered when upgrading current transport network capacity, is network scalability. A novel full-meshed connected ring expansion methodology and planning tool have been proposed. A 3 to 15 node expansion ring has been studied by demonstrating a dramatic system SNR improvement when the proposed planning tool was used. The results are that node output signal and optical SNR have been improved from -16dBm/10dB to +005dBm/21dB by NPOT.

• Journal of KIISE:Information Networking
• /
• v.30 no.5
• /
• pp.668-675
• /
• 2003

In this paper, we propose an enhanced p-cycle (preconfigured protection cycle) scheme for WDM mesh networks with QoS constraints. In the previous researches on p-cycle, it is assumed that user's connection has a hi-directional connectivity and the same bandwidth on both direction. Therefore it is difficult to apply p-cycle based link protection to uni-directional connections for multicasting or asymmetric broadband multimedia communications with hi-directional connectivity. And it didn't consider QoS of backup path. We enhanced the p-cycles to accomodate uni-directional connections for multicasting or asymmetric bandwidth communications with hi-directional connectivity. And we propose a selection procedure of p-cycle to assure QoS of backup path. We were able to reduce a required backup bandwidth by applying a uni-directional p-cycle concept to asymmetric broadband multimedia communication environment. The proposed p-cycle selection procedure is applied to the U.S. sample network to evaluate whether the configured p-cycles can support QoS constraint of working path and backup path.

• Journal of Digital Contents Society
• /
• v.5 no.2
• /
• pp.151-156
• /
• 2004

This paper presents process model to accomplish traffic engineering in Internet. The process model consists of 4 stages. The first stage is the formulation of a control policy dominated network operation. The second stage is the observation of the network state through a set or monitoring functions. The third stage is the characterization or traffic and analysis or the network state. The final stage is the optimization of network performance. the four stages of the process model defined above are iterated.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.11
• /
• pp.44-52
• /
• 1998

In this paper, we proposed a node architecture and cell routing strategies for ATM applications in WDM multihop networks. The proposed node architecture employs the optical delay loop for storing the cell which is failed in out-link contention. This optical delay loop allows the delay of one cell without the electro-optic conversion. Therefore, we can get the advantages of S&F(Store-and-Forward) routing in Deflection-based all-optical networks. To support the ATM applications efficiently. we considered the transmission priority of ATM cell so that high priority cell can be transmitted with lower loss and shorter delay than low priority one. Two kinds of routing strategies are designed for this architecture: Scheme-Ⅰand Scheme-Ⅱ. Scheme-Ⅰapplies S&F routing to high cell and Deflection routing to low cell, i.e., high cells are routed along the shortest path based on S&F routing, but low cells are deflected or lost. Schem-Ⅱ is similar to Scheme-Ⅰexcept that low cells can occupy the optical loop if it is available. This Scheme-Ⅱ increases the utilization of network resources without decreasing the throughput of high cell by reducing the low cell loss rate when traffic load is low. Simulation results show that our routing strategies have better performance than conventional ones under non-uniform traffic as well as uniform traffic.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4B
• /
• pp.566-575
• /
• 2010

In recent, artificial immune system has become an important research direction in the anomaly detection of networks. The conventional artificial immune systems are usually based on the negative selection that is one of the computational models of self/nonself discrimination. A main problem with self and non-self discrimination is the determination of the frontier between self and non-self. It causes false positive and false negative which are wrong detections. Therefore, additional functions are needed in order to detect potential anomaly while identifying abnormal behavior from analogous symptoms. In this paper, we design novel network attack detection and response schemes based on artificial immune system, and evaluate the performance of the proposed schemes. We firstly generate detector set and design detection and response modules through adopting the interaction between dendritic cells and T-cells. With the sequence of buffer occupancy, a set of detectors is generated by negative selection. The detection module detects the network anomaly with a set of detectors and generates alarm signal to the response module. In order to reduce wrong detections, we also utilize the fuzzy number theory that infers the degree of threat. The degree of threat is calculated by monitoring the number of alarm signals and the intensity of alarm occurrence. The response module sends the control signal to attackers to limit the attack traffic.

• Journal of the Optical Society of Korea
• /
• v.10 no.3
• /
• pp.112-117
• /
• 2006

We experimentally investigated the transmission characteristics of 400 Gbit/s (10 Gbit/s ${\times}$ 40 channels) WDM signals with 100 GHz channel spacing over 323 km of installed NZ_DSF. The installed fiber has optical properties of 0.28 dB/km attenuation, 4.3 ps/nm/km dispersion, $0.083ps/nm^2/km$ dispersion slope and less than $0.05ps/km^{1/2}$ PMD coefficient. In this experiment, two cases of dispersion compensation schemes, the lumped type and the distributed type, were compared. The results implied that the distributed type dispersion compensation in which dispersion compensation devices are inserted at the end of the each span showed better transmission performance than the lumped one in which dispersion compensation devices are located at the transmitter and receiver sites. From the analysis of the experimental results, we verified that different transmission performance comes from the power penalty induced by XPM in the distributed scheme is lower than the lumped scheme case.

• 한국정보통신설비학회:학술대회논문집
• /
• 2002.08a
• /
• pp.127-129
• /
• 2002

ADSL, Metro Ethernet등 가입자에게 넓은 대역폭을 할당하는 기술이 서비스 영역에 적용되고 있음에 따라 이를 원활히 수용할 수 있는 초고속 대용량 기간망 구축기술이 필요하다. 현재 사용되는 기술로는 2.5Gbps 또는 10Gbps의 전송속도를 갖는 수 십 채널을 각각 파장이 다른 광반송파(optical carrier)에 실어 광학적으로 다중화한 뒤 한 가닥의 광섬유를 통해 전송시키는 파장분할 다중화(Wavelength Division Multiplexing: WDM) 기술이 있다. 본 논문에서는 채널 당 전송 속도를 40Gbps로 증가시키거나, 증폭기 이득 대역폭을 확장시켜 채널 수를 증가시켜 수 THz의 전송용량을 수 천 km 전송시키는데 필요한 라만 광증폭기 기술, FEC 기술, 변조포맷, 분산관리(Dispersion management)기술 등의 핵심기술을 소개한다.