• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.3
• /
• pp.258-264
• /
• 2004

In this paper, MMIC double balanced star mixer for 40 ㎓ was implemented on GaAs substrate with backside vias. In the design of the MMIC mixer, the design of balun and diode was required. A novel balun structure using microstrip to CPS was presented. The 40 ㎓ balun was designed based on the design experience of the scale-down balun by 2 ㎓. The balun may be suitable for fabrication in MMIC process with backside via and can easily be applied for DBM(Double Balanced Mixer). A Schottky diode was designed and implemented using p-HEMT process considering the compatability with other high frequency MMIC's fabricated on p-HEMT base process. Finally, the double balanced star mixer was fabricated using the balun and the p=HEMP Schottky diode. The measured performance of mixer shows 30 ㏈ conversion loss at 18 ㏈m LO power. This insufficient performance is caused by the unwanted diode at AlGaAs junction in vertical structure of p-HEMT. If the p-HEMT's gate is recessed to AlGaAs layer, and so the diode is eliminated, the mixer's performances will be improved.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.12
• /
• pp.1207-1212
• /
• 2015

A vibro ripper utilizes high-frequency vibration for rock fragmentation. This concept is different from those used by other existing breakers. The gearbox-shank welded joint of a vibro ripper is a very important part. Because it delivers the vibromotive force to the tooth, it is important to predict its soundness. This study was conducted to predict the fatigue life under welding conditions. The shank materials were Hardox-Hituf and AR400, and the filler metals were CSF-71T and CSF-81T. Fatigue tests were conducted under each set of conditions. P-S-N curves are presented based on the statistical testing method recommended by JSME-S002, and a comparison is made of the results under each set of conditions. The life was estimated using a P-S-N curve.

• The Journal of Engineering Geology
• /
• v.5 no.3
• /
• pp.237-274
• /
• 1995

This study was focused on the improvement of the measurement technique of P-wave velocity for the assesment of the anisotropy of the engineering property of rock. Samples used were collected from a working quarry within the Carnmenellis granite area on which series of engineering geological data have been accumulated. This study mainly concerned the development of measurement technique at the curved surface of rock, the use of natural honey-based coupling agent and the drying method for rock specimen over $P_2O_5$. According to the results, the range of the P-wave velocity anisotropy in two dimensional plane, fell between 0 and 4.68 (%). The direction where maximum velocity occurred was parallel to the orientation of the maximum in-situ stress. The result showed that P - wave velocity is a useful measure to asses the anisotropy of the engineering property of rock and it is suggested that the improvements adopted here can be applied to the experimental work on the rocks in Korea.

• The Korean Journal of Physiology and Pharmacology
• /
• v.9 no.2
• /
• pp.109-115
• /
• 2005

Endothelial activation and subsequent recruitment of inflammatory cells are important steps in atherogenesis. The increased levels of cell adhesion molecules (CAM) have been identified in diabetic vasculatures, but the underlying mechanisms remain unclear. To determine the relationship among vascular production of superoxide, expression of CAM and diabetes, superoxide generation and expression of intercellular adhesion molecule-1 (ICAM-1), vascular cell adhesion molecule-1 (VCAM-1), E- and P-selectin in the aorta from control (C57BL/6J) and diabetic mice (ob/ob) were measured. In situ staining for superoxide using dihydroethidium showed an increased superoxide production in diabetic aorta, accompanied with an enhanced NAD(P)H oxidase activity. Immunohistochemical analysis revealed that the endothelial expression of ICAM-1 ($3.5{\pm}0.4$) and VCAM-1 ($3.8{\pm}0.3$) in diabetic aorta was significantly higher than those in control aorta ($0.9{\pm}0.5$ and $1.6{\pm}0.3$, respectively), accompanied with the enhanced expression of gp91phox, a membrane subunit of NAD(P)H oixdase. Furthermore, there was a strong positive correlation (r=0.89, P＜0.01 in ICAM-1 and r=0.88, P＜0.01 in VCAM-1) between ICAM-1/VCAM-1 expression and vascular production of superoxide. The present data indicate that the increased production of superoxide via NAD(P)H oxidase may explain the enhanced expression of CAM in diabetic vasculatures.

• Microbiology and Biotechnology Letters
• /
• v.19 no.3
• /
• pp.215-221
• /
• 1991

An autonomous replication sequence (ARS) derived from Cephalosporium acremonium ATCC 20339 was cloned in Sarchuromyces cerevisiae SHY 3 using YIp5 as a cloning vector. A new recombinant plasmid, designated pCY-2, which contained a 3.7 kb BamHI fragment of C. acrenzonium DNA showed the highest stability among the 40 recombinant plasmids composed of the YIp5 2nd ARS of C. ucremoniztm. Also, Southern hybridization and transformation of E, cull with DNA purified from yeast transformants verified that pCY-2 autonomously replicates in yeasts. Transformation efficiency and plasmid stability of pCY-2 in yeast were higher than those ol YRp 7 containing ARS which originated from yeast. Detailed studies by subcloning revealed that two ARSs existed within 2.6 kb of the insert, which is a novel discovery. However, it was concluded that these two ARSs were ligated during the gene manipulation in vitro.

• Textile Coloration and Finishing
• /
• v.21 no.5
• /
• pp.21-26
• /
• 2009

In order to analyze numerically the hydrophobicity of the new dyes synthesized for unmodified pure polypropylene fibers, the octanol-water partition coefficient (logP), which is one of molecular descriptors representing hydrophobicity of organic compounds, was obtained by a semi-empirical method using Chem3D software. For the dyes of higher logP than around 5, the affinity of the dyes towards unmodified polypropylene fiber was substantial. In contrast to the new dyes for polypropylene, conventional disperse dyes have logP values lower than 5 and exhibited poor affinity.

• Journal of Applied Biological Chemistry
• /
• v.65 no.4
• /
• pp.307-312
• /
• 2022

A hair essence containing α-tocopheryl acetate, retinyl palmitate, and phytantriol (TRP-hair essence) was prepared. TRP-hair essence was excellent in thermal stability to the extent that it did not harden at all even at 210 ℃. TRP-hair essence potently protected the hair from heat stress, significantly reducing the protein leakage in heat-treated hair (p <0.001). Treatment of TRP-hair essence to dyed human hair significantly protected hair against heat stress (p <0.05) as well as improved hair cuticle and color persistence (p <0.05). In addition, as a result of directly treating human hair with TRP-hair essence, the cuticle and tensile strength of human hair were significantly improved (p <0.05). These results suggest that TRP-hair essence can be effective for hair protection and hair quality improvement.

• Microbiology and Biotechnology Letters
• /
• v.40 no.4
• /
• pp.356-363
• /
• 2012

The aim of this study was to utilize rice bran, the main waste product of paddy processing, in xanthan gum production by Xanthomonas campestris fermentation. Deffated rice bran was enzymatically hydrolyzed using cellulase, gluco-amylase, alpha-amylase and xylanase at various pHs and temperatures within 0-12 h. The highest sugar content reached at $35^{\circ}C$, pH 5.5 in 6 h with 41.66%. The enzymatic hydrolysate was used as the carbon source for xanthan gum production by X. campestris NRRL B-1459 and X. campestris pv. campestris. The highest productivities obtained were 21.87 and 17.10 g/L, respectively. Viscosity measurement for the obtained xanthan gums and commercial gum was carried out in gum solutions at various pHs and temperatures. The highest viscosity was reached with 1% gum solutions at $20^{\circ}C$ and pH 5.5 for all gums with viscosity values of 470, 131 and 138 mPa sec, respectively. This work has provided relevant scientific information about the use of rice bran, an abundant agroindustrial residue, to produce xanthan gum.

• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.753-761
• /
• 2016

Liquid-liquid extraction (LLE) can be used for the recovery of acetic acid from black liquor prior to bioethanol fermentation. Recovery of value-added chemicals such as acetic-, formic- and lactic acid using LLE from Kraft black liquor was studied. Acetic acid and formic acid have been reported to be strong inhibitors in fermentation. The study elucidates the effect of three reaction parameters: pH (0.5~3.5), temperature ($25{\sim}65^{\circ}C$), and reaction time (24~48 min). Extraction performance using tri-n-octylphosphine oxide as the extractant was evaluated. The maximum acetic acid concentration achieved from hydrolyzates was 69.87% at $25^{\circ}C$, pH= 0.5, and 36 min. Factorial design was used to study the effects of pH, temperature, and reaction time on the maximum inhibitor extraction yield after LLE. The maximum potential extraction yield of acetic acid was 70.4% at $25.8^{\circ}C$, pH=0.6 and 37.2 min residence time.

• BMB Reports
• /
• v.38 no.4
• /
• pp.491-499
• /
• 2005

DNA-based molecular markers for differentiation of five penaeid shrimps (Penaeus monodon, P. semisulcatus, Feneropenaeus merguiensis, Litopenaeus vannamei and Marsupenaeus japonicus) were developed based on polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) and single-stranded conformation polymorphism (SSCP) of 16S ribosomal (r) DNA. Differentiation of P. monodon, P. semisulcatus and L. vannamei can be unambiguously carried out by PCR-RFLP of 16S $rDNA_{560}$ whereas P. semisulcatus and M. japonicus shared a BABB mitotype. These shrimps were successfully discriminated by SSCP analysis of 16S $rDNA_{560}$. Nevertheless, the amplification success for L. vannamei and F. merguiensis was not consistent when tested against larger sample sizes. As a result, 16S $rDNA_{560}$ of an individual representing the most common mitotype of each species was cloned and sequenced. The new primer pair was designed and tested against the large sample sizes (312 bp product, N = 185). The amplification success was consistent across all species. PCR-RFLP of 16S $rDNA_{312}$ was as effective as that of 16S $rDNA_{560}$. Differentiation of all shrimp species were successfully carried out by SSCP analysis.